Краткое содержание страницы № 1
ENGLISH FRANÇAIS ESPAÑOL
9A10509700
Z
-
GF 650
Multi music player/CD recorder
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
MANUAL DEL USUARIO
Краткое содержание страницы № 2
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 4) Follow all instructions. DO NOT REMOVE COVER (OR BACK). NO USER- 5) Do not use this apparatus near water. SERVICEABLE PARTS INSIDE. REFER SERVICING TO 6) Clean only with dry cloth. QUALIFIED SERVICE PERSONNEL. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The lightning flash with arrow
Краткое содержание страницы № 3
ENGLISH This product has been designed and manufactured according to WARNING: TO PREVENT FIRE OR SHOCK FDA regulations “title 21, CFR, chapter 1, subchapter J, based on HAZARD, DO NOT EXPOSE THIS APPLIANCE the Radiation Control for Health and Safety Act of 1968“, and is TO RAIN OR MOISTURE. classified as class 1 laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the CAUTION pr
Краткое содержание страницы № 4
Contents Before using the unit Thank you for choosing TEAC. Read this manual carefully Read this before attempting any operations to get the best performance from this unit. < The nominal temperature should be between 5°C and 35°C (41°F and 95°F). The CD-RW recorder is more sensitive to Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 2 extremes of temperature than ordinary CD players. Before using the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 5
ENGLISH Handling Records How to Replace the Stylus The stylus should last about 200 hours under normal use. < Do not touch the record’s grooves. Only handle records, by However, it is recommended that the stylus be replaced as soon the edges or the label, with clean hands. Skin oils from even as you notice a change in sound quality. clean hands can leave a residue on the record surface that will Prolonged use of a worn-out stylus may damage the record. gradually deteriorate the quality of your r
Краткое содержание страницы № 6
Discs Please use CD, CD-R and CD-RW discs bearing the < Should the disc become dirty, wipe the surface radially (from “DIGITAL AUDIO” mark. the center hole outward towards the outer edge) with a soft, dry cloth: CD CD-R CD-RW < Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc’s plastic surface. < Discs should be returned to their cases after use to avoid dust and scratches that coul
Краткое содержание страницы № 7
ENGLISH Remote Control Unit The provided Remote Control Unit allows the unit to be About CD-R and CD-RW discs operated from a distance. CD-R discs can be recorded once only. Once they have been When operating the remote control unit, point it towards the used for recording, they cannot be erased or re-recorded. REMOTE SENSOR on the front panel of the unit. However, if space is available on the disc (and the disc has not been finalized), additional material can be recorded. < Even if the remote c
Краткое содержание страницы № 8
How to open/close the turntable cover Assembling the Turntable Caution: < There is a drive belt hooked to the turntable platter's drive rim. Be careful not to damage the drive belt when assembling the turntable. < When turning on the power to the unit, the tone arm may move if the cum was subjected to shock during transportation and has been displaced. We suggest you to assemble the turntable leaving the vinyl tie intact that holds the tone arm. When you use the GF-650 for the first time after
Краткое содержание страницы № 9
ENGLISH 5. Remove the red tape ribbon. When needed for transportation 1.Disassemble and pack the turntable in reverse order of 6. Slowly turn the turntable platter 5 or 6 times by hand assembly. so that the drive belt is correctly seated into the pulley's groove. 2.Insert the two white cushioning materials into beneath the base plate. 7. Place the record mat on top of the turntable platter. 3.Rotate the two shipping screws counterclockwise until they block. 4. Put the stylus guard back on. 5. H
Краткое содержание страницы № 10
Connection A B LRL R AUDIO AUDIO C OUT IN CD player, cassette tape deck, etc. CAUTION < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord. A FM antenna While in FM mode, tune in an FM station and extend the lead to find the best position for the reception. This
Краткое содержание страницы № 11
ENGLISH Identifying the Parts (Turntable) D A E F B G H A Before use, remove the C stylus guard. I A Screws fixing the turntable for transportation Before use, completely loosen the screws by turning them clockwise with a coin or screwdriver. B Turntable C Speed selector D 45 RPM adaptor E Tone arm F STOP lever Pull this lever to stop playback of a record. G START lever Pull this lever to start playback of a record. H Tone arm holder I Size selector 11
Краткое содержание страницы № 12
Identifying the Parts A B C D E F G H Q I S R P O N M L K J I E F A B Q C D P E F N J B O L 12
Краткое содержание страницы № 13
ENGLISH A POWER N MUSIC SKIP (.//) Press this button to turn the unit on or off. In CD mode, use these buttons to skip tracks. Hold down these buttons to search for a part of a track. The equipment draws a nominal amount of power from the AC outlet even with its POWER switch in the OFF O REC LEVEL position. In record pause mode, use this knob to adjust the recording level. B PHONO/AUX, FM/AM, CD P FINALIZE Press the PHONO/AUX button and select PHONO to play a record. Use this button to finalize
Краткое содержание страницы № 14
Basic Operation Listening to a Record Caution: 2 < Before use, completely loosen the shipping screws by turning them clockwise with a coin and remove the stylus guard. < When turning on the power to the unit, the tone arm may move if the cum was subjected to shock during transportation and has been displaced. When you use the GF-650 for the first time, turn on the power to the unit leaving the vinyl tie intact to prevent the tone arm from moving and leave the unit alone for more than 30 seconds
Краткое содержание страницы № 15
ENGLISH Shipping screw Adaptor 3 1 2 STOP lever 6 Shipping screw 5 4 6 Pull the START lever toward you. Manual Operation Move the tone arm gently to the edge of the record (or the starting point of a track), and gently lower the tone arm. The turntable will start and the tone arm will automatically move to the lead-in groove. When the record finishes playing, the tone arm will automatically return to the tone arm holder and the turntable will stop. < Playing records with the dust cover down will
Краткое содержание страницы № 16
Listening to the Radio Listening to a CD 1 1 1 5 2 3 2 4 1 Select FM or AM using the FM/AM button. 1 Press the CD button. “--” blinks for a few seconds. When no disc is set, “nOdISC” appears on the display. 2 Turn the TUNING knob to tune in a station. 2 Press the OPEN/CLOSE button (L). 3 Place a disc on the tray with the printed label face up. < The TUNED indicator lights when a station is correctly tuned in. < The STEREO indicator lights when an FM stereo broadcast is tuned in. If the reception
Краткое содержание страницы № 17
ENGLISH 4 Press the OPEN/CLOSE button (L) to close the tray. A B < It takes a few seconds for the unit to load the disc. No buttons will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed. disc type indicator A To suspend playback temporarily (pause mode) total number of the tracks total play time of the disc < The disc type indicator shows the type of disc currently Press the PAUSE button (J) during playback. Playback stops loaded.
Краткое содержание страницы № 18
Listening to a CD 2 Time Display C D Each time the DISPLAY button is pressed, the display changes as C To skip to the next or a previous track follows: CD/CD-R/CD-RW playback During playback, repeatedly press the SKIP button elapsed time of current track (.or/) until the desired track is found. The selected track will be played from the beginning. In the stop mode, press the SKIP button (.or/) repeatedly until the track you want to listen to is found, and time remaining for current track press t
Краткое содержание страницы № 19
ENGLISH Repeat Playback Shuffle Playback Each time the REPEAT button is pressed, the repeat mode is The tracks can be played randomly. Press the SHUFFLE button changed as follows: during playback. (In the stop mode, press the SHUFFLE button and the PLAY button.) REPEAT ALL REPEAT 1 When the shuffle playback of all the tracks has been finished, (off) the unit stops and the shuffle playback mode is cancelled. < If you press the / button during shuffle playback, next track will be randomly selected
Краткое содержание страницы № 20
Programmed Playback 3 Up to 32 tracks can be programmed in the desired order. Press the PROGRAM button. < Insert a disc and select “CD” before beginning programming. < Shuffle playback does not work during programmed playback. < Programmed playback works with finalized discs only. 1 Press the PROGRAM button in the stop mode. The track is programmed, and “P-02” is displayed. 2 3 Repeat step and to program more tracks. < You can program up to 32 tracks. < To cancel the program mode, press the STOP
