Краткое содержание страницы № 1
Instruction Book
Краткое содержание страницы № 2
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER— To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. 2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated
Краткое содержание страницы № 3
TABLE OF CONTENTS KNOW YOUR MACHINE ................................................ 2 Shell Tuck Stitch..................................................... 61 Name of Parts ................................................................. 2 Applique sewing ..................................................... 62 Standard Accessories and Storage.................................. 3 Programming French knot ..................................... 63 Extension Table ...................
Краткое содержание страницы № 4
KNOW YOUR MACHINE 4 2 5 Name of Parts 3 1 6 1. Top Cover 7 2. Spool Pin 24 3. Spool Holder (Large) 23 4. Foot Storage Compartment 8 22 5. Bobbin Thread Cutter 21 6. Bobbin Winder Spindle 20 7. Bobbin Winder Stopper 8. Visual Touch Screen 9. Speed Control Lever 10. Up/Down Needle Button 19 11. Auto-Lock Button 18 12. Reverse Button 13. Start/Stop Button 17 14. Extension Table (Accessory Box) 15. Hook Cover Plate Release Button 9 16. Hook Cover Plate 17. Needle Plate 10 18. Built-in Needle Threade
Краткое содержание страницы № 5
Standard Accessories and Storage 1. Embroidery Hoop (A) (with Template) 12 3 2. Embroidery Hoop (B) (with Template) 3. Foot Control 4. Instruction Book 45 6 5. Template Sheets (for Built-in Designs) 6. Power Supply Cord 7. Instructional Movie CD 8. Hard Cover (Carrying Case) 8 7 9 10 11 9. Zipper Foot E 10. Satin Stitch Foot F 14 E F 11. Embroidery Foot P C P 12. Zigzag Foot A (comes attached to the machine) 13. Blind Hem Foot G G 13 14. Overedge Foot C 15. Foot Holder (comes attached to the mac
Краткое содержание страницы № 6
1. Automatic Buttonhole Foot R 12 2. Overcasting Foot M 3. Button Sewing Foot T 4 4. Basting/Darning Foot P-2 3 5. Screwdriver 5 6 6. Screwdriver 7. Scissors 8 7 8. Set of Needles 9. Spool Pin Felt 10 9 10. Lint Brush 11. Additional Spool Pin 11 12 12. Seam Ripper 13. Spool Holder (Large) 13 14 14. Spool Holder (Small) 15. Bobbins 15 16 16. Spool Stand 17. Quilting Bar 17 Detachable extension table for accessory storage Sewing accessories are stored in the Extension Table. To open, lift the cove
Краткое содержание страницы № 7
Extension Table 1 For free arm sewing To remove, lift out the Extension Table toward you as illustrated. 1 Extension Table Free Arm sewing is suitable for: - stitching sleeves, waistbands, pant legs or any circular garment area. - darning socks or mending knees, elbows or children’s wear. 2 For flat-bed sewing Position the Tabs on the Base Tab Holes and push down gently. 2 Tabs 3 Base Tab Holes 3 5
Краткое содержание страницы № 8
GETTING READY TO SEW Connecting the Power Supply The Memory Craft 9700 is equipped with an auto voltage system, which automatically adjusts the equipment to any local power supply voltage between 1 100 and 240V, 50/60 Hz. 3 First, turn off the Power Switch. Then insert the Foot Control Plug and Machine Plug into the Machine Socket. Next, insert the Power Supply Plug into the Wall Outlet and turn on the Power Switch. 5 1 Power Switch 2 2 Machine Plug 3 Machine Socket 4 Power Supply Plug 5 Wall Ou
Краткое содержание страницы № 9
Function Buttons 1 Start/Stop Button Press this button to start or stop the machine. This 5 button can be used either in the Ordinary Sewing Mode or Embroidery Mode. In the Ordinary Sewing Mode, the machine starts running slowly for the first few stitches, it then runs at the speed set by the Speed Control Lever. The button will turn red when the machine is running, and green, that it has been stopped. NOTE: The Start/Stop Button cannot be used when the foot control is connected to the machine.
Краткое содержание страницы № 10
Controlling Sewing Speed Speed Control Lever You can limit the maximum sewing speed with the Speed Control Lever according to your sewing needs. To increase the sewing speed, slide the lever to the right. To decrease the sewing speed, slide the lever to the left. Foot Control Pressing on the Foot Control can vary sewing speed. The harder you press the Foot Control, the faster the machine runs. NOTE: The machine runs at the maximum speed set by the Speed Control Lever when the foot control is ful
Краткое содержание страницы № 11
Raising and Lowering the Presser Foot The Presser Foot Lifter raises and lowers the Presser Foot. You can raise the Presser Foot about 6 mm (1/4") higher than the normal up position by exerting more pressure when lifting the Presser Foot Lifter. This allows for easy removal of the Presser Foot and helps you to place thick fabrics under it. 1 Presser Foot Lifter 2 Presser Foot 1 2 Removing and Attaching the Presser Foot Removing the presser foot 2 Press the Up/Down Needle Button to raise the need
Краткое содержание страницы № 12
WRNING: Turn the Power Switch OFF before changing the presser foot. Button Sewing Foot T 2 To Attach: Insert the Rear Pin on the foot into the Groove of the 1 Foot Holder. Gently lower the presser bar, holding the foot with your fingers. 1 Rear Pin 2 Groove of the Foot Holder 5 Darning Foot P-2 4 3 To Attach: Loosen the thumb screw and remove the Foot Holder. Attach the Darning Foot P-2 to the presser bar putting the Pin on the Needle Clamp Screw. Tighten the thumb screw firmly with the screwdri
Краткое содержание страницы № 13
Various Presser Feet and Their Uses 1 Zigzag Foot A: 1 This is the most versatile foot. It can be used for various stitches including straight stitches and zigzag stitches. It is designed to achieve firm and neat seam results. 2 Overedge Foot C: 2 This foot is exclusively for overedging. The brush on the foot effectively prevents skipped stitches on the raw edge of fabrics. 3 Zipper Foot E: 3 This foot is for sewing zippers. The zipper teeth are guided through the grooves on the bottom of the fo
Краткое содержание страницы № 14
Winding the Bobbin Removing the bobbin 1 1 1 Slide the Hook Cover Plate Release Button to the right, and remove the Hook Cover Plate. 1 Hook Cover Plate Release Button 2 Hook Cover Plate 2 2 Lift out the Bobbin from the Bobbin Holder. 3 Bobbin 2 3 Setting the Spool of Thread Lift up the Spool Pin. Place the spool of thread on the Spool Pin with the thread coming off the spool as shown. Attach the Large Spool Holder, and press it firmly against the spool of thread. NOTE: Use the Small Spool Holde
Краткое содержание страницы № 15
2 Threading for bobbin winding 1 Hold the upper thread with both hands and place it down into the Slit. 3 1 2 Guide the thread around the Thread Guide following the dashed line as shown in the diagram. 3 Thread through the hole in the Bobbin from the inside to the outside. Put the Bobbin on the Bobbin Winder Spindle. 4 Push it to the right. 4 5 Hold the free end of the thread in your hand and depress the foot control. Stop the machine after the bobbin has made several turns, and cut the thread c
Краткое содержание страницы № 16
Inserting the Bobbin 1 1 Place the Bobbin in the Bobbin Holder with the Thread running off counterclockwise. 1 1 Thread 2 Bobbin Holder 2 2 Guide the thread into the Front Notch (A) on the 2 front of the Bobbin Holder. (A) 3 Draw the thread to the left, sliding it between 3 the tension spring blades. (B) 4 Continue to draw the thread lightly until the thread 4 slips into the Side Notch (B). (B) 3 5 Pull out about 10 cm (4") of thread to the rear. 5 NOTE: A Threading Chart is shown on the Hook Co
Краткое содержание страницы № 17
Threading the Machine 1 2 Raise the Presser Foot Lifter. Press the Up/Down Needle Button twice to raise the needle to its highest position. 4 Turn the Power Switch OFF. 3 5 6 7 1 Hold the upper thread with both hands as shown 12 and place it down into the Slit. 2 Draw the thread around the Thread Guide following the dashed line as shown in the diagram. 1 3 Then draw the thread down along the right channel 3 and around the bottom of the Thread Guide Plate. 1 Right Channel 2 4 Firmly draw the thre
Краткое содержание страницы № 18
Built-in Needle Threader 1 2 3 1 Raise the needle to its highest position by pressing the Up/Down Needle Button twice. 1 2 Turn the Power Switch OFF. 3 Lower the presser foot. 4 Depress the Needle Threader Knob as far as it will go. The hook comes out through the needle eye 4 from behind. 1 Up/Down Needle Button 2 Needle Threader Knob 3 Hook 2 5 Draw the thread down around the Threader Guide 5 and under the hook. 4 Threader Guide 3 3 4 6 Release the threader knob slowly while holding the 6 threa
Краткое содержание страницы № 19
Drawing Up the Bobbin Thread 1 1 Raise the Presser Foot Lifter. 1 2 Hold the needle thread with your fingers and press the Up/Down Needle Button twice to pick up the 2 bobbin thread. Draw up the needle thread to bring up a loop of the Bobbin Thread. 2 1 Needle Thread 2 Up/Down Needle Button 3 Bobbin Thread 1 3 3 Slide 10 cm (4") of both threads to the back under 3 the presser foot. 1 3 17
Краткое содержание страницы № 20
Changing Needles 1 Raise the needle by pressing the Up/Down Needle 1 button and lower the presser foot. Turn the Power Switch OFF. 1 Loosen the Needle Clamp Screw by turning it counterclockwise. Remove the Needle from the clamp. 1 Needle Clamp Screw 2 Insert a new Needle into the Needle Clamp with the 2 Flat Side of the needle to the rear. When inserting the Needle into the Needle Clamp, 2 push it up against the stopper pin and tighten the Needle Clamp Screw firmly. 2 Stopper Pin 3 Flat Side 3 T
