Руководство по эксплуатации Desa GWN30TB

Руководство по эксплуатации для устройства Desa GWN30TB

Устройство: Desa GWN30TB
Категория: Электрический подогреватель
Производитель: Desa
Размер: 3.73 MB
Добавлено: 2/3/2014
Количество страниц: 60
Печатать инструкцию

Скачать

Как пользоваться?

Наша цель - обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства Desa GWN30TB. Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с Desa GWN30TB.

Для Вашего удобства

Если просмотр руководства Desa GWN30TB непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:

  • Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции Desa GWN30TB на полном экране, используйте кнопку Полный экран.
  • Скачивание на компьютер - Вы можете также скачать инструкцию Desa GWN30TB на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
Desa GWN30TB Руководство по эксплуатации - Online PDF
Advertisement
« Page 1 of 60 »
Advertisement
Печатная версия

Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше - Печатать инструкцию. Вам не обязательно печатать всю инструкцию Desa GWN30TB а только некоторые страницы. Берегите бумагу.

Резюме

Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для Desa GWN30TB. Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.

Краткое содержание
Краткое содержание страницы № 1

UNVeNTed (VeNT-FRee) Bl Ue FlaMe Gas Hea TeR
saFeTY INFoRMa TIoN aNd INsT alla TIoN MaNU al
Models
GWN20TB, GWP20TB, GWN30TB, GWP30TB, HdB20NT, HdB20PT,
HdB30NT, HdB30PT, MN20T, MP20T, MN30T, MP30T,
VN20BTB, VP20BTB, VN30BTB, VP30BTB WMN20a, WMP20a
WARNING: If the information in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity o

Краткое содержание страницы № 2

TaBle oF CoNTeNTs Safety .................................................................. 2 Troubleshooting ................................................. 19 Local Codes......................................................... 4 Specifications .................................................... 23 Unpacking............................................................ 4 Replacement Parts ............................................ 23 Product Identification ..................................

Краткое содержание страницы № 3

saFeTY Continued Natural and Propane/LP Gas: Natural and Keep the appliance area clear propane/LP gases are fuel gases. Fuel gases and free from combustible ma- are odorless. An odor-making agent is added to fuel gases. The odor helps you detect a fuel terials, gasoline and other flam- gas leak. However, the odor added to fuel mable vapors and liquids. gas can fade. Fuel gas may be present even 1. This appliance is only for use with the type though no odor exists. of gas indicated on the

Краткое содержание страницы № 4

saFeTY Continued 12. Operating heater above elevations of 14. Provide adequate clearances around air 4,500 feet could cause pilot outage. openings. 13. To prevent performance problems, do not use propane/LP fuel tank of less than 100 lbs. capacity. l oCal Codes Install and use heater with care. Follow all lo- State of Massachusetts: The installation cal codes. In the absence of local codes, use must be made by a licensed plumber or the latest edition of National Fuel Gas Code, gas fitter

Краткое содержание страницы № 5

aIR FoR CoMBUsTIoN aNd VeNTIla TIoN Unusually Tight Construction WARNING: This heater shall The air that leaks around doors and windows not be installed in a room or may provide enough fresh air for combustion and ventilation. However, in buildings of un- space unless the required vol- usually tight construction, you must provide ume of indoor combustion air additional fresh air. is provided by the method de- Unusually tight construction is defined as scribed in the National Fuel Gas co

Краткое содержание страницы № 6

aIR FoR CoMBUsTIoN aNd VeNTIla TIoN Continued 4. Compare the maximum Btu/Hr the space DETERMINING FRESH-AIR FLOW can support with the actual amount of Btu/ FOR HEATER LOCATION Hr used. Determining if You Have a Confined or _______ Btu/Hr (maximum can support) Unconfined Space _______ Btu/Hr (actual amount used) Use this work sheet to determine if you have a Example: confined or unconfined space. 51,200 Btu/Hr (maximum the space can Space: Includes the room in which you will install

Краткое содержание страницы № 7

aIR FoR CoMBUsTIoN aNd VeNTIla TIoN Continued vENTILATION AIR Ventilation Air From Inside Building 12" This fresh air would come from an adjoining unconfined space. When ventilating to an Ventilation Grills adjoining unconfined space, you must provide Into Adjoining Room, Ventilation two permanent openings: one within 12" of the Option 2 Grills into Or Adjoining Remove ceiling and one within 12" of the floor on the Room, Door into Option 1 Adjoining wall connecting the two spac

Краткое содержание страницы № 8

INsTalla TIoN Continued INSTALLATION ITEMS CAUTION: This heater creates Before installing heater, make sure you have warm air currents. These currents the items listed below. • for propane/LP gas, external regulator move heat to wall surfaces next (supplied by installer) to heater. Installing heater next • piping (check local codes) to vinyl or cloth wall coverings or • sealant (resistant to propane/LP gas) operating heater where impurities • equipment shutoff valve * (such as, but not

Краткое содержание страницы № 9

INsTalla TIoN Continued Front Panel THERMOSTAT SENSING BULB Screw (Thermostat Models Only) The thermostat sensing bulb has been placed below the heater. 1. Place clamp on thermostat sensing bulb as shown in Figure 5. Clamp is provided in hardware package. 2. Snap clamp into upper mounting hole as shown in Figure 5. Mounting hole is located on lower left edge on back of heater. Make sure the thermostat sensing bulb is point- ing up. Figure 7 - Removing Front Panel Of Heater (actual heater

Краткое содержание страницы № 10

INsTalla TIoN Continued 2. Mark screw locations on wall (see Figure 8). Attaching To Wall Anchor Method For attaching mounting bracket to hollow Note: Only mark last hole on each end of walls (wall areas between studs) or solid walls mounting bracket. Insert mounting screws (concrete or masonry) through these holes only. 1. Drill holes at marked locations using 3. Remove tape and mounting bracket from 5/16" drill bit. For solid walls (concrete or wall. masonry), drill at least 1" deep. 1

Краткое содержание страницы № 11

INsTalla TIoN Continued Installing Bottom Mounting Screws MOUNTING HEATER TO FLOOR 1. Locate two bottom mounting holes. These WITH OPTIONAL FLOOR KIT holes are near bottom on back panel of Mounting Base Feet to Heater heater (see Figure 12). Note: A 90° elbow is required for mounting this 2. Mark screw locations on wall. unit and must be installed BEFORE base feet 3. Remove heater from mounting bracket. to provide proper clearance (see Figure 15). 4. If installing bottom mounting screws int

Краткое содержание страницы № 12

INsTalla TIoN Continued CONNECTING TO GAS SUPPLY CAUTION: Use only new, black WARNING: This appliance iron or steel pipe. Internally-tinned requires a 3/8" NPT (National copper tubing may be used in Pipe Thread) inlet connection to certain areas. Check your local the pressure regulator. codes. Use pipe of large enough diameter to allow proper gas vol- ume to heater. If pipe is too small, WARNING: A qualified ser- undue loss of volume will occur. vice person must connect heater to ga

Краткое содержание страницы № 13

INsTalla TIoN Continued IMPORTANT: Hold the pressure regulator CHECKING GAS CONNECTIONS with wrench when connecting it to gas pip- ing and/or fittings. Do not over tighten pipe WARNING: Test all gas piping connection to regulator. The regulator body and connections, internal and could be damaged. external to unit, for leaks after Pressure installing or servicing. Correct Heater Regulator Cabinet all leaks at once. WARNING: Never use an 3/8" NPT Pipe Nipple open flame to check for a le

Краткое содержание страницы № 14

INsTalla TIoN Continued Test Pressures Equal To or Less Than Thermostat Gas Valve 1/2 PSIG (3.5 kPa) 1. Close equipment shutoff valve (see Fig- ure 16). 2. Pressurize supply piping system by either Gas opening propane/LP supply tank valve Meter for propane/LP gas or opening main gas valve located on or near gas meter for natural gas or using compressed air. 3. Check all joints from gas meter for natural gas (see Figure 17) or propane/LP supply tank for propane/LP gas, to equipment shutof

Краткое содержание страницы № 15

oPeRa TIoN 6. Thermostat Models: Turn control knob FOR YOUR SAFETY READ counterclockwise to the PILOT BEFORE LIGHTING position. Press in control knob for five (5) seconds. WARNING: If you do not fol- Manual Models: Press in and turn control low these instructions exactly, knob counterclockwise to the PILOT a fire or explosion may result position. Keep control knob pressed in for causing property damage, per- five (5) seconds. sonal injury or loss of life. 7. With control knob press

Краткое содержание страницы № 16

oPeRa TIoN Continued Note: The thermostat sensing bulb measures the temperature of air near the heater cabinet. WARNING: Always operate This may not always agree with room tem- manual control heaters at the perature (depending on housing construction, locked positions. Operation installation location, room size, open air tem- between these positions may peratures, etc.). Frequent use of your heater will create a possible health hazard let you determine your own comfort levels. if used

Краткое содержание страницы № 17

oPeRa TIoN Continued Extension Cord minutes after unit cycles off or is turned off, Use extension cord if needed. The cord must blower will shut off. Blower will cycle on and off have a three-prong, grounding plug and a in this manner. Note: If you have a heater with three-hole receptacle. Make sure cord is in a thermostat, the heater and blower will not turn good shape. It must be heavy enough to carry off and on at exactly the same time. Blower cycle the current needed. An undersized cord

Краткое содержание страницы № 18

CleaNING aNd MaINTeN aNCe We also recommend that you keep the burner WARNING: Turn off heater tube and pilot assembly clean and free of dust and dirt. To clean these parts we recommend and let cool before cleaning. using compressed air no greater than 30 PSI. Your local computer store, hardware store or CAUTION: You must keep home center may carry compressed air in a control areas, burner and circu- can. If using compressed air in a can, please follow the directions on the can. If you

Краткое содержание страницы № 19

TRoUBlesHoo TING WARNING: Turn off and unplug heater and let cool before servicing. Only a qualified service person should service and repair heater. CAUTION: Never use a wire, needle or similar object to clean ODS/pilot. This can damage ODS/pilot unit. Note: All troubleshooting items are listed in order of operation. OBSERvED PROBLEM POSSIBLE CAUSE REMEDY When ignitor button is pressed, 1. Ignitor electrode positioned 1. Replace pilot assembly there is no spark at ODS/ wrong pilot 2. Ignito

Краткое содержание страницы № 20

TRoUBlesHoo TING Continued OBSERvED PROBLEM POSSIBLE CAUSE REMEDY ODS/pilot lights but flame 1. Control knob not fully 1. Press in control knob fully goes out when control knob pressed in is released 2. Control knob not pressed in 2. After ODS/pilot lights, keep long enough control knob pressed in 30 seconds 3. Equipment shutoff valve not 3. Fully open equipment shut- fully open off valve 4. Thermocouple connection 4. Hand tighten until snug, loose at control valve then tighten 1/4 turn more


Скачавание инструкции
# Руководство по эксплуатации Категория Скачать
1 Desa 000 BTU SPC-30R Руководство по эксплуатации Электрический подогреватель 0
2 Desa 000 Btu/hr Models Руководство по эксплуатации Электрический подогреватель 0
3 Desa 000-12 Руководство по эксплуатации Электрический подогреватель 0
4 Desa 100 Руководство по эксплуатации Электрический подогреватель 0
5 Desa 104504-02 Руководство по эксплуатации Электрический подогреватель 0
6 Desa 000-15 Руководство по эксплуатации Электрический подогреватель 0
7 Desa 000-30 Руководство по эксплуатации Электрический подогреватель 0
8 Desa 050 BTU Руководство по эксплуатации Электрический подогреватель 0
9 Desa 105801-09 Руководство по эксплуатации Электрический подогреватель 0
10 Desa 105838-02 Руководство по эксплуатации Электрический подогреватель 0
11 Desa 10 Руководство по эксплуатации Электрический подогреватель 0
12 Desa 101811-01C.pdf Руководство по эксплуатации Электрический подогреватель 0
13 Desa 000-24 Руководство по эксплуатации Электрический подогреватель 0
14 Desa 104506-02 Руководство по эксплуатации Электрический подогреватель 0
15 Desa 106040-02 Руководство по эксплуатации Электрический подогреватель 0
16 A.O. Smith AH - 290 Руководство по эксплуатации Электрический подогреватель 6
17 A.O. Smith AHD 290 Руководство по эксплуатации Электрический подогреватель 7
18 A.O. Smith AHDS 290 Руководство по эксплуатации Электрический подогреватель 0
19 A.O. Smith ST 3000 Руководство по эксплуатации Электрический подогреватель 5
20 A.O. Smith WATER HEATERS Руководство по эксплуатации Электрический подогреватель 13