Руководство по эксплуатации iOptron SmartStar R80

Краткое содержание страницы № 1

Quick Start Guide

®
SmartStar -R80 GPS Telescope
#9801 (Pulsar Pink) & #9802 (Astro Blue)
®
SmartStar -R80 Telescope
#9501 (Pulsar Pink) & #9502 (Astro Blue)
FEATURES
• Alt-Azimuth Mount– The Cube™-- The only mount of its kind for ultimate rotation
TM
• Includes the GoToNova Controller. One of the most intuitive controllers on the market.
• Over 5,000 object database.
• Built-in 32-channel GPS (#9801 & #9802 only)
• Large LCD screen with 4 lines and 21-character wide screen
• Dri

Краткое содержание страницы № 2

® Quick Start Guide for SmartStar -R80 Telescopes (with and without GPS) Step 1. Unlock the leg locks #10 (shown by arrows at left). Extend tripod legs. Lock the leg locks afterwards. Step 2. Turn the center tripod lock knob (#9) to secure and stabilize the tripod. Tighten to a firm feel. Caution: Make sure you loosen the tripod lock knob before collapsing the tripod to store away. Step 3. Threaded  Attach mount to tripod by placing the mount onto the threaded bolt on bolt  tripod

Краткое содержание страницы № 3

Step 6. Insert 45º diagonal: Insert the diagonal (#6) into the eyepiece side of the telescope. Tighten the thumbscrews to a firm feel only. Insert the eyepiece: Remove the supplied K 25mm eyepiece (#7) from its container and slide it into the other end of the diagonal. Tighten the thumbscrews to a firm feel only. Remove the dust cover from the end of 45º diagonal optical tube assembly. Use the focus knob to bring objects into focus. You may need to turn eyepiece the focus knob quite a

Краткое содержание страницы № 4

Step 12. Now “Set Local Time:” is displayed at the top. A blinking cursor is at the second line. GPS will provide current date and time. If GPS is not available, current date and time can be manually entered at this screen. Use ▲/ ▼ keys to change the numbers. Use ◄/ ► keys to scroll through the fields. The last field of this screen is for setting “DaylightTime saving”. Use ▲/ ▼ keys to switch between “Y” (yes) and “N” (no). Press ENTER when finished. Step 13. Now “Setup Site Info:”