Краткое содержание страницы № 1
OWNER'S MANUAL
6.0 Horsepower
2400 PSI 2.4 GPM
High Pressure Washer
Model No:
919.670281
• Safety
Assembly
WARNING: Before using this
Operation
product, read this manual and
follow all Safety Rules and
Maintenance
Operating Instructions.
Parts List
Sold by Sears Canada, Inc., Toronto, Ont. M5B2B8
D24150 Rev. 0 7/16/01
Краткое содержание страницы № 2
TABLE OF CONTENTS Warranty ................................................................2 Storage ................................................................15 Safety Guidelines................................................3-5 Troubleshooting..............................................16-17 Assembly ............................................................5-7 Repair Parts ........................................................18 Operation..........................................
Краткое содержание страницы № 3
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these sections. indicates an imminently hazardous indicates a potentially hazardous situation which, if not avoided, will situation which, if not avoided, may result in death or serious in
Краткое содержание страницы № 4
WHAT CAN HAPPEN HOW TO PREVENT IT HAZARD Unsafe operation of your pressure washer Become familiar with the operation and con- could lead to serious injury or death to you or trols of the pressure washer. others. Keep operating area clear of all persons, RISK OF UNSAFE pets, and obstacles. OPERATION Do not operate the product when fatigued or under the influence of alcohol or drugs. Stay alert at all times. Never defeat the safety features of this prod- uct. Do not operate machine w
Краткое содержание страницы № 5
WHAT CAN HAPPEN HOW TO PREVENT IT HAZARD If pressure washer is equipped with a fuel Fuel or oil can leak or spill and could result in fire or breathing hazard, serious shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pres- injury or death can result. Fuel or oil leaks RISK OF INJURY AND will damage carpet, paint or other sure washer is not equipped with a fuel shut- PROPERTY DAMAGE off valve, drain the fuel from tank before trans- surfaces in ve
Краткое содержание страницы № 6
Tools Required for Assembly 3. Mount the rubber isolator to the frame. To mount isolator place threaded end of bolt through Adjustable wrench the washer. 5 mm Allen wrench (supplied) Next with washer on bolt place threaded end of bolt through the larger hole in bottom of the rubber isolator. Remove Pressure Washer from Carton Place threaded portion of bolt through the Open carton from the top. Locate and remove from same hole location the wood plank was box the handle, gun, wand, chemic
Краткое содержание страницы № 7
7. Place assembled gun and wand on pressure 8. Place pull cord into the wire bracket holder. washer holder. Pull the cord under the wire bracket to the right of the wire loop. Gun/Wand Holder Lift the pull cord handle up and slide the cord to the left, sliding the cord into the wire loop. Next slide handle behind the wire bracket to the left of the wire loop. Wire Bracket Engine recoil will pull the cord into its final position. Cord Checklist Before going any further please review the
Краткое содержание страницы № 8
Before Starting The Engine Read Owner’s Manual. Do not To operate the engine you will need to do the following. attempt to operate equipment until you have read Owners Manual for Safety, Operation, and Maintenance Instructions. Always check engine oil level before every start. Running engine low of oil or out of oil could result in serious damage. Note: Included with your unit is a video cassette that demonstrates how to operate your pressure washer. If you have a video cassette recorder you sh
Краткое содержание страницы № 9
Use clean, fresh, regular unleaded gasoline with a Squeeze trigger on pressure washer wand to minimum of 85 octane. Do not mix oil with gasoline. relieve air pressure caused by turning on the water. If unleaded fuel is unavailable leaded fuel may be used. Water will spew out of the gun in a thin stream. This will make it easier to start the engine. IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as the Engage the safety latch on the spray
Краткое содержание страницы № 10
How To Use Your Pressure Washer Start the pressure washer as outlined in the “To Start Your Pressure Washer” paragraph on page 9. Adjusting Chemical Flow Turn the knob on the high pressure soap wand to Stand on a stable surface and grip adjust the soap flow. Turn knob counterclockwise gun/wand firmly with both hands. for more soap (+) and clockwise for less soap (-) Expect the gun to kick when triggered. Depress the trigger on the gun to begin spraying. Release trigger to stop spraying. DO
Краткое содержание страницы № 11
MAINTENANCE CUSTOMER RESPONSIBILITIES TABLE E Ev ve er ry y 1 10 00 0 B Be effo or re e E Ev ve er ry y 2 25 5 h ho ou ur rs s E Ev ve er ry y 5 50 0 h ho ou ur rs s h ho ou ur rs s o or r y ye ea ar rlly y e ea ac ch h u us se e o or r y ye ea ar rlly y o or r y ye ea ar rlly y MAINTENANCE TASK PRESSURE WASHER check/clean inlet screen X check high pressure hose X check soap and chemical hose and filter X check gun and wand for leaks X purge pump of air and contaminants X ENGINE check oil level
Краткое содержание страницы № 12
Pressure Washer Maintenance Tilt unit and drain pump oil into appropriate container. Check and Clean Inlet Screen: Examine inlet screen Fill pump with 10 ounces of R&O 150 oil. NOTE: on pump inlet fitting. Clean if clogged; replace if torn. If unable to find R&O 150 oil, use 30W non- Check High Pressure Hose: High pressure hose can detergent oil. develop leaks from wear, kinking, abuse. Inspect hose each time before use. Check for cuts, leaks, abrasions Replace oil drain plug and tigh
Краткое содержание страницы № 13
Changing Engine Oil Clean Pre-Cleaner and Air Cleaner Cartridge Your engine is equipped with an oval dual element air Change oil while engine is still warm. Preferably cleaner: the two elements include a foam pre-cleaner drain oil from top of engine as illustrated below. Drain oil with air cleaner side up. Oil can be and an air cleaner cartridge. drained from engine bottom if necessary. To remove the air cleaner element, loosen two cover IMPORTANT: Before tipping engine or equipment to sc
Краткое содержание страницы № 14
SERVICE AND ADJUSTMENTS Shut off the pressure washer and turn off the water Carburetor supply. The carburetor of your high pressure washer is pre-set at the factory. The carburetor should not be tampered Disconnect spark plug wire. with. If your pressure washer is used at an altitude in Pull trigger on gun handle to relieve any water excess of 5000 feet consult with your nearest Sears pressure. Service Center regarding high altitude set changes. Disconnect the wand from the gun. Remove
Краткое содержание страницы № 15
STORAGE Preparing Pressure Washer for Storage While preparing the engine make sure water supply is turned on and NOTE: If you do not plan to use your unit for 30 days flowing to the unit. NEVER run unit without water or more, unit should be prepared for storage. supply running through pump. Failure to do so will cause pump damage. IMPORTANT: It is important to prevent gum deposits Pump Preparation from forming in essential fuel system parts such as the carburetor, fuel filter, hose or tank durin
Краткое содержание страницы № 16
TROUBLESHOOTING GUIDE CORRECTION PROBLEM CAUSE Engine will not start 1. Add Fuel. 1. No fuel. 2. Pressure builds up after two pulls 2. Squeeze gun trigger to relieve pressure. on the recoil starter or after initial use. 3. Push primer bulb 3 times or choke engine. 3. Not primed or choked. 4. Spark plug wire not attached. 4. Attach spark plug wire. 5. Choke lever in the "Choke" position 5. Move choke to the "No Choke" position. on a "hot" engine or an engine that has been exposed to thermal hea
Краткое содержание страницы № 17
PROBLEM CAUSE CORRECTION 1. Worn seal or packing. 1. Have replaced by AWSC. No or low pressure (after period of normal use.) 2. Worn or obstructed valves. 2. Have replaced by AWSC. 3. Worn unloader piston. 3. Have replaced by AWSC. 1. Worn or broken o-ring. 1. Check and replace. Water leaking at gun/wand connection 2. Loose hose connection. 2. Tighten. 1. Loose connections. 1. Tighten. Water leaking at pump 2. Have replaced by AWSC. 2. Piston packings worn. 3. Have replaced by AWSC. 3. Worn or b
Краткое содержание страницы № 18
OWNER'S MANUAL MODEL NO. 919.670281 SERVICE AND REPAIR PARTS CALL 1-800-665-4455* Keep this number handy should you require a service call or need to order repair parts. If ordering parts make sure you have the name, make and model no. of the merchandise and the name and number of the part you wish to order. SERVICE *If calling locally, please use one of the following numbers: Regina -566-5124 Montreal-333-5740 Toronto-744-4900 Halifax -454-2444 Kitchener-894-7590 Ottawa-738-4440 Vancouver - 4
Краткое содержание страницы № 19
GUIDE DE L’UTILISATEUR 6,0 Chevaux 2 2400 lb/po 2.4 gal./min Appareils de lavage sous pression Modèle nº : 919.670281 Mesuresde sécurité Assemblage VERTISSEMENT: Avant d’utiliser cet appareil, lire Fonctionnement attentivement ce guide. Se conformer aux mesures de Entretien sécurité et aux directives sur Liste des pièces le fonctionnement de l’appareil. Vendu par Sears Canada, Inc., Toronto, Ont. M5B 2B8 D24150 Rev. 0 7/16/01
Краткое содержание страницы № 20
TABLE DES MATIÈRES Garantie..................................................................2 Entretien et réglages............................................14 Mesures de sécurité - définitions ..........................2 Entreposage ........................................................15 Mesures de sécurité ..........................................3-5 Dépannage ....................................................16-17 Assemblage ........................................................5-7
