Краткое содержание страницы № 1
OPERATOR’S MANUAL
GASOLINE PRESSURE wASHER
3000 PSI
Ry80030A
Your pressure washer has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
DANGER: You WILL be KILLED or SERIOUSLY HURT if you do not follow the instructions in this operator’s
manual.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Краткое содержание страницы № 2
TABLE OF CONTENTS Introduction ....................................................................................................................................................................... Important Safety Instructions ............................................................................................................................................3 Specific Safety Rules...................................................................................................
Краткое содержание страницы № 3
IMPORTANT SAFETy INSTRUCTIONS Check damaged parts. Before further use of the tool, a guard or other part that is damaged should wARNING: be carefully checked to determine that it will operate Read and understand all instructions. Failure to follow properly and perform its intended function. Check for all instructions listed below may result in electric shock, alignment of moving parts, binding of moving parts, fire and/or carbon monoxide poisoning which will cause breakage of parts, mo
Краткое содержание страницы № 4
SPECIFIC SAFETy RULES Never direct a water stream towards people or pets, Never store the machine with fuel in the fuel tank or any electrical device. inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, Before starting any cleaning operation, close doors and the like. and windows. Clear the area to be cleaned of debris, toys, outdoor furniture, or other objects that could create If the fuel tank has to be drained, do this
Краткое содержание страницы № 5
SyMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SyMBOL NAME DESIGNATION/EXPLANATION Wet Conditions Alert Do not expose to rain or use in damp locations. To reduce the risk of injury, user must read and understand Read The Operator’s Manual operator’s manual before using this product. Always wear safety goggles or safety glasses with side shield
Краткое содержание страницы № 6
SyMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SyMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. wARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Краткое содержание страницы № 7
FEATURES PRODUCT SPECIFICATIONS Engine Size ...................................................................................................................................................................11 cc Engine Output, Horsepower ............................................................................................................................................7 HP Fuel Tank Capacity ...............................................................................................
Краткое содержание страницы № 8
FEATURES KNOw yOUR PRESSURE w ASHER RECOIL STARTER See Figure 1. The recoil starter is used (along with the ON/OFF switch) to Before attempting to use this product, familiarize yourself start the pressure washer. with all operating features and safety rules. SPRAy w AND ACCESSORIES STORAGE The spray wand has a round assist handle that provides Safely stores accessories (not included) within easy reach. added control of the spray wand and helps reduce fatigue. CHOKE STORAGE BRACKET Using the c
Краткое содержание страницы № 9
ASSEMBLy UNPACKING wARNING: This product requires assembly. Do not attempt to modify this tool or create accesso- Carefully cut the box down the sides then remove the ries not recommended for use with this tool. Any such tool and any accessories from the box. Make sure that alteration or modification is misuse and could result in a all items listed in the packing list are included. hazardous condition leading to possible serious personal NOTE: This tool is heavy. To avoid back injury, li
Краткое содержание страницы № 10
ASSEMBLy ATTACHING THE RESTING FOOT See Figure 3. Lift the machine slightly. Slide the resting foot into the bottom of the spray wand storage tube. Push the resting foot into the storage tube until the base restIng of the machine rests in the grooves on top of the resting fOOt foot. ASSEMBLING THE SPRAy w AND See Figure 4. Fig. 3 To attach the assist handle assembly: Remove the wing screw from the assist handle assembly then slide the spray wand assembly onto the assist handle Deten
Краткое содержание страницы № 11
ASSEMBLy ADDING OIL TO THE ENGINE See Figure 7. NOTE: This machine has been shipped with approximately slOt oz. of oil in the engine from testing. you must add oil to the engine before starting it the first time. InjeCtIOn HOse CAUTION: Any attempt to start the engine without adding oil will result in engine failure. Place pressure washer on a flat, level surface. Unscrew the oil cap / dipstick by turning counter- BArBeD fIttIng clockwise. NOTE: There are two oil cap / dipsticks o
Краткое содержание страницы № 12
ASSEMBLy CONNECTING THE HIGH PRESSURE HOSE TO THE PUMP HIgH PressUre See Figure 9. HOse After the high pressure hose has been uncoiled and attached to the spray wand: Pull back and hold the quick-connect collar on the pump. Insert the nozzle on the end of the quick-connect high pressure hose into the collar. Release the collar. Pull on the hose to be certain it is properly secured. CONNECTING THE GARDEN HOSE TO THE PRESSURE wASHER See Figure 10. qUICK-COnneCt Water supply mu
Краткое содержание страницы № 13
OPERATION APPLICATIONS On This product has been designed for the purposes listed POsItIOn On/Off below: sWItCH Removing dirt and mold from decks, cement patios, and house siding C leaning cars, boats, motorcycles, outdoor furniture, and grills STARTING/STOPPING THE PRESSURE CHOKe (ClOseD - A) wASHER See Figures 11 - 13. CAUTION: Do not run the pump without the water supply connected and turned on. Before starting the engine, connect all hoses and check all fluids (oil and gas
Краткое содержание страницы № 14
OPERATION To stop the engine using the fuel valve: Close the fuel valve and wait for the engine to stop. slOt NOTE: Avoid letting fuel remain in the carburetor for long periods as this can clog carburetor passages with impuri- ties resulting in malfunctions. SELECTING THE RIGHT QUICK-CONNECT NOZZLE FOR THE JOB See Figure 14 - 15. lOCK OUt Befor e starting any cleaning job, determine the best nozzle for the job. Each of the five nozzles has a different spray Fig. 14 pattern. The noz
Краткое содержание страницы № 15
OPERATION MOVING THE PRESSURE wASHER tO MOve tHe MACHIne See Figure 17. Loosen the pivot knob located halfway down the spray wand storage tube. Grasp the handle at the rear of the pressure washer. Turn the top section of the pressure washer until it is fully ex- tended as shown in figure 17. Retighten the pivot knob. Grasp the moving handle and lift the machine off the resting foot. Roll the machine to the desired position. STORING THE PRESSURE wASHER See Figure 17. Allow 30 minute
Краткое содержание страницы № 16
MAINTENANCE CLEANING THE AIR FILTER See Figure 19. wARNING: A dirty air filter will cause starting difficulty, loss of When servicing, use only identical replacement parts. performance, and shorten the life span of the engine. Check Use of any other parts may create a hazard or cause the air filter monthly. If working in dusty soil, clean the product damage. air filter after each refueling. For best performance, replace the air filter at least once a year. wARNING: AIr fIlter Always wea
Краткое содержание страницы № 17
MAINTENANCE CHANGING THE OIL See Figure 20. Shut off the engine. Place a container under the pressure washer. Remove the oil drain plug and drain the old oil. NOTE: Drain the oil while the engine is still warm but not 0.6 - 0.7mm hot. Warm oil will drain quickly and more completely. Replace the oil drain plug. Fig. 1 Replace the oil with new, clean oil. This engine will hold 0 oz. or .6 liters of oil (10W-30). NOTE: Consult hazardous waste management guidelines in your a
Краткое содержание страницы № 18
MAINTENANCE Inspect the spark plug and clean or replace, as neces- STORING THE PRESSURE wASHER sary. It is important to store this product in a frost-free area. Always Reinstall the spark plug, but leave the spark plug wire empty water from all hoses, the pump, the fuel tank, and the disconnected. detergent bucket before storing. Air Filter: NOTE: Use of a fuel stabilizer and pump saver will give you better performance and increase the life of the machine. Clean the air filter.
Краткое содержание страницы № 19
TROUBLESHOOTING PROBLEM CAUSE SOLUTION Engine fails to start 1. Engine switch is in the off position 1. Move switch to start. . No fuel in tank . Fill tank. 3. Spark plug shorted or fouled 3. Replace spark plug. 4. Spark plug is broken (cracked 4. Replace spark plug. porcelain or electrodes broken) 5. Ignition lead wire shorted, broken, 5. Replace lead wire or attach to spark or disconnected from spark plug plug.
Краткое содержание страницы № 20
NOTES 0
