Руководство по эксплуатации Bogen CommunicationsBAL2S

Краткое содержание страницы № 1

Block Diagram
BAL2S
Balanced Input
Module
Features
• Balanced high-impedance inputs
• Selectable channel gain (0 dB or 18 dB)
• Variable signal ducking when muted
• Fade back from mute level
• Can be muted from higher priority modules
50 Spring Street, Ramsey, NJ 07446 U.S.A.
201-934-8500; Fax: 201-934-9832
Printed in Taiwan. 0208
© 2002 Bogen Communications, Inc.
www.bogen.com
54-2081-01R1
Specifications subject to change without notice.

Краткое содержание страницы № 2

Module Installation Input Wiring 1. Turn off all power to the unit. Balanced Connection Unbalanced Connection Use this wiring when the source equipment supplies a Use this wiring when the source equipment supplies an 2. Make all necessary jumper selections. balanced, 3-wire output signal. unbalanced, 2-wire output signal. 3. Position module in front of desired module For either input, connect the shield wire of the source sig- For either input, short the input minus “-” terminals to the bay open

Краткое содержание страницы № 3

Block Diagram BAL2S Balanced Input Module Features • Balanced high-impedance inputs • Selectable channel gain (0 dB or 18 dB) • Variable signal ducking when muted • Fade back from mute level • Can be muted from higher priority modules 50 Spring Street, Ramsey, NJ 07446 U.S.A. 201-934-8500; Fax: 201-934-9832 Printed in Taiwan. 0208 © 2002 Bogen Communications, Inc. www.bogen.com 54-2081-01R1 Specifications subject to change without notice.