Краткое содержание страницы № 1
WT-5130ER
Radio-Controlled Alarm Clock
with Time Projection
Краткое содержание страницы № 2
TABLE OF CONTENTS About this Manual…………………………..……….………………………………..3 Before you Begin (inventory of items)……..…………….………………………….3 Glossary of Common Terms……………..……………………….…………………4 Quick Set-up Guide……………………………..……………...……………………..5 Detailed Set-up Guide……………………..……..………..…….………….……6-11 Battery Installation……………………………..……………………………6-7 Program Mode……………………………..…………………………………..7 Programming Sequence………………..……………………………………..8 Function Buttons……………………………………………………………….8 LCD Contrast S
Краткое содержание страницы № 3
ABOUT THIS MANUAL Thank You and Congratulations on selecting a La Crosse Technology Projection Alarm Clock! We are positive you will enjoy the benefits of accurate weather readings and the precise, radio- controlled time information that our weather stations offer. La Crosse Technology introduced radio-controlled clocks to the US market in 1991 and continues to be on the cutting-edge of this technology in America. This manual will guide you step-by-step through setting up your
Краткое содержание страницы № 4
GLOSSARY OF COMMON TERMS NIST* The National Institute of Standards and Technology maintains the primary frequency standard for the United States. The NIST also coordinates the United States time and frequency standards with other world standards. The NIST provides time and frequency services for United States clientele. WWVB* The WWVB is an AM radio station in Ft. Collins, Colorado, managed by the NIST. The WWVB’s function is to broadcast time-of-day information derived from the NIS
Краткое содержание страницы № 5
QUICK SET-UP GUIDE Hint: Use good quality alkaline batteries and avoid rechargeable batteries. 1. Place the projection alarm and remote temperature sensor 3-5 feet apart. 2. Batteries should not be installed into either unit for 15 minutes. 3. Place the batteries into the remote temperature sensor first and then into the projection alarm. 4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES. In this time the display and the sensor will begin to communicate with each other. The
Краткое содержание страницы № 6
DETAILED SET-UP GUIDE A. BATTERY INSTALLATION 1. REMOTE TEMPERATURE SENSOR a. Remove the battery cover. b. Observing the correct polarity, install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure that they do not spring free during installation). c. Replace the battery cover. 2. PROJECTION ALARM a. Remove the battery cover. b. Observe the correct polarity, and install 2 AA batteries. c. In addition or instead of inserting batteries,
Краткое содержание страницы № 7
NOTES: • After the batteries have been installed a tone will sound, and the LCD (Liquid Crystal Display) will activate. • The indoor temperature/humidity and the remote temperature will be displayed. Also, the time will appear as “-:--”. • The WWVB search is automatically initiated, and a tower icon appears and flashes with the time colon (no tower icon will appear if the WWVB is too weak to be detected, and the time display will remain on “-:--”). • While th
Краткое содержание страницы № 8
C. PROGRAMMING SEQUENCE 1. LCD Contrast Setting 2. Time Zone Setting 3. Manual Time Display 4. Year, Day & Date Setting 5. 12/24-Hour Setting 6. °C/°F Setting 7. Daylight Saving Time On/Off D. FUNCTION BUTTONS There are 3 function buttons located on the front of the projection alarm and one on the top. The function buttons are labeled: AL/HOUR, light direction icon, SET/+/MIN, and SNOOZE/ADVANCE MODE/ADVANCE MODE (the top bar). Set Button (toggles between Alarm Button
Краткое содержание страницы № 9
3. In the indoor temperature/humidity section of the LCD, the time zone will flash. 4. Press and release the “SET/+/MIN” button to select the appropriate time zone. There are 24 time zones to choose from (based relative to the international time standard of GMT (“Greenwich Mean Time”). 5. Press and release the “SNOOZE/ADVANCE MODE” bar to confirm the time zone setting and to advance to the Manual time Setting. NOTE: The U.S. time zones will show abbreviations as opposed to the
Краткое содержание страницы № 10
3. Press and release the “SET/+/MIN” button to advance the year. The range for the year is 2003-20029. 4. Press and release the “SNOOZE/ADVANCE MODE” bar to confirm the year and advance to the Month and Day setting. 5. Press and release the “SET/+/MIN” button to advance the month. 6. Press and release the “AL/HOUR” button to advance the day. 7. Press and release the “SNOOZE/ADVANCE MODE” bar to confirm Month and Day selection to advance to the 12/24-Hour Setting. I. 12/24 HOUR TIME S
Краткое содержание страницы № 11
5. Press and release the “SNOOZE/ADVANCE MODE” bar to confirm the DST setting and complete the set-up sequence. NOTE: The DST default is “ON”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”. 11
Краткое содержание страницы № 12
FEATURES & OPERATIONS A. FEATURES 1. Projection of time and/or remote temperature 2. EL backlight 3. Display of indoor temperature/humidity or alarm time 4. Indoor temperature and humidity 5. Remote outdoor temperature 6. Time alarm 7. Weather Forecast & Weather boy icon B. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged into an AC outlet, the projection alarm can continuously project the time and remote temperature. 2. When operating on batteries alone, the projectio
Краткое содержание страницы № 13
3. The indoor temperature will take time to adjust to the surrounding temperature as the sensor is inside the case. 4. If the remote temperature is placed next to the projection alarm, more often than not the temperatures will not be exact with one another. This is not a defect, but simply reflects the difference in measuring methods. The remote temperature is designed for changing temperature at a wider range. E. INDOOR HUMIDITY 1. The projection alarm measures indoor humidity with an
Краткое содержание страницы № 14
a. Press and hold “AL/HOUR” button for 3 seconds until the alarm time is flashing. b. Press and release “AL/HOUR” to advance the hour, and “SET/+/MIN” to advance the minute. The time will display “PM” if set to PM, and display nothing if set to AM. c. The projection alarm clock will revert to normal operation when no buttons are pressed for 15 seconds. The alarm is now set and activated. 2. ACTIVATING/DEACTIVATING THE ALARM a. After entering the alarm setting mode, the alarm is acti
Краткое содержание страницы № 15
H. CHANGING DISPLAY MODE (INDOOR TEMPERATURE/HUMIDITY OR ALARM TIME) There are two possible display modes in the indoor temperature/humidity section of the LCD (lower left). To change the display press and release the “SET/+/MIN” button to toggle between the two modes. I. WEATHER FORECAST & WEATHER TENDENCY INDICATOR Weather forecast icon Weather tendency indicator Weather Boy icon 1. WEATHER FORECAST ICONS The weather forecast can be displayed as f
Краткое содержание страницы № 16
NOTE: After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will allow sufficient time for the projection alarm clock to collect air pressure data at a constant altitude and therefore result in a more accurate forecast. Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting feature is estimated to have an accuracy level of about 75% due to the varying
Краткое содержание страницы № 17
3. WEATHER BOY FORECASTING ICONS: A total of 15 Weather Boy icons combinations can be displayed depending on outdoor temperature and air pressure recorded from the remote temperature sensor only. Once the temperature and air pressure are recorded, the projection alarm clock automatically display the appropriate Weather Boy icon as an indication of current weather and suggestion for dressing up accordingly. The icon will remain permanently visualized on the LCD once it registered a chan
Краткое содержание страницы № 18
B. Mounting with adhesive tape A. MOUNTING WITH SCREWS 1. Remove the mounting bracket from the remote temperature sensor. The bracket should snap off easily. 2. Place the mounting bracket over the desired location. Through the three screw holes of the bracket, mark the mounting surface with a pencil. 3. Where marked, start the screw holes into the mounting surface. 4. Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket, but take care
Краткое содержание страницы № 19
• Do not try to repair the units. Contact La Crosse Technology for Repairs. TROUBLESHOOTING The Projection is faint Problem 1) Use AC adapter 2) Darken surroundings Solution 3) Use fresh batteries (if AC is not used) The LCD is faint. Problem Replace the batteries. Solution “OFL” appears in the indoor temperature LCD. Problem 1) Move unit to an area with warmer or cooler surrounding temperature. Solution 2) Current surrounding temperatures are outside measuring range.
Краткое содержание страницы № 20
4) Contact La Crosse Technology. NOTE: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual. SPECIFICATIONS FOR WT-5130ER Temperature 14 °F to 98.4 °F with 0.2 °F resolution (indoor) Measuring range: -22 °F to 157.8 °F with 0.2 °F resolution (outdoor) Every 15 seconds (indoor) Checking intervals: Every 5 minutes (outdoor). Humidity Measuring range: 0 – 99 % Checking inter
