Краткое содержание страницы № 1
RPD-1151/1158 (Hawkeye)
1U rack mount 15" TFT monitor/keyboard drawer
with optional 8-port KVM
User’s Guide
User’s Manual
I
Краткое содержание страницы № 2
Contact Info: Quanmax Inc. 4F, No. 415, Ti-Ding Blvd. Sec. 2NeiHu District, Taipei 114Taiwan Tel: +886-2-2799-2789 Fax: +886-2-2799-7399 Visit our site at: www.quanmax.com © 2008 Quanmax Inc. All rights reserved. The information in this user’s guide is provided for reference only. Quanmax does not assume any liability arising out of the application or use of the information or products described herein. This user’s guide may contain or reference information and p
Краткое содержание страницы № 3
RPD-1151/1158 User Manual PACKING LIST The complete RPD-1151/ 1151T package consists of: One 1U 19” rack mount console Rear mounting kit 2 x short L brackets 2 x long L brackets 2 x expending brackets 2 x supporting bracket 2 x PS/2 cables & 1 x VGA cable One power cord One user manual 1 x serial cable (for the RPD-115T) 1 x touch screen utility diskette (for the RPD-115T) The complete RPD-1158 package consists of: One 1U 19” rack mount console- Rear mounting ki
Краткое содержание страницы № 4
RPD-1151/1158 User Manual SAFETY INSTRUCTIONS 1. Please read these safety instructions carefully. 2. Please keep this User’s Manual for later reference. 3. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for cleaning. 4. For pluggable equipment, the socked-outlet shall be installed near the equipment and shall be easily accessible. 5. Please keep this equipment from humidity. 6. Lay this e
Краткое содержание страницы № 5
RPD-1151/1158 User Manual The Power Cord or plug is damaged. Liquid has penetrated into the equipment. The equipment has been exposed to moisture. The equipment has not worked well or you can not get it work according to User’s Manual. The equipment has dropped and damaged. If the equipment has obvious signs or breakage. 16. Never open the equipment. For safety reason, qualified service personnel should only open the equipment. 2
Краткое содержание страницы № 6
RPD-1151/1158 User Manual INDEX OF CONTENTS PACKING LIST............................................................................................................0 SAFETY INSTRUCTIONS ...........................................................................................1 INDEX OF CONTENTS................................................................................................3 CHAPTER 1 GENERAL INFORMATION..................................................................6 1.
Краткое содержание страницы № 7
RPD-1151/1158 User Manual 2.2.10 OSD V-Position..............................................................................17 2.2.11 Switch Color...................................................................................17 2.2.12 Set User Color ..................................................................................18 2.2.13 Memory Recall..................................................................................18 2.2.14 Exit OSD.................................
Краткое содержание страницы № 8
RPD-1151/1158 User Manual 5.2.4 Front View........................................................................................30 5.3 Hot Plugging..............................................................................................30 5.3.1 Powering Off and Restarting ............................................................31 5.3.2 Port Selection...................................................................................31 5.4 Port ID Numbering ...................
Краткое содержание страницы № 9
RPD-1151/1158 User Manual CHAPTER 1 GENERAL INFORMATION 1.1 Overview The Hawkeye is an ideal solution for network administration with multiple servers / platforms. Their 15-inch large size TFT LCD color display and ultra-low-profile compact industrial keyboard / trackball provide the user-friendliest and most reliable environment for network administrators. All these functions are integrated in a 19-inch 1U space with rugged construction design to achieve ultra space saving and high r
Краткое содержание страницы № 10
RPD-1151/1158 User Manual 1.2 Product Specification Standard Meets EIA RS-310C 1U 19” rack mount standard Dimension (H x W x D) 44 x 440 x 492 (mm) LCD Panel 15” Active-Matrix TFT LCD Anti-reflection Glass for 2 x 249 x 333 (mm) LCD Maximum Resolution 1024 x 768 pixels Input signal format RGB Analog Video Display control Auto Tune, Brightness, Contrast, Color, Quality, Position, Language, Recall Keyboard PS/2, 83 keys (US version) or 84 keys (International version) Trackball PS/
Краткое содержание страницы № 11
RPD-1151/1158 User Manual AUTO MENU The RPD-1151/ 1151T Num Caps Scroll Pad AUTO MENU 1 234 5 6 7 8 The RPD-1158 8 T M 7 T M 6 T M 5 T M 8 T M 7 T M 6 T M 5 T M 8 /I 90 ~264 OW O /OFF /I 90 ~264 OW O /OFF T M 2 T M 1 T M 4 T M 3 T M 2 T M 1 T M 4 T M 3 S E SYS E SYS E SYS E SYS E SYS E SYS E SYS E SY AC N V V P ER N AC N V V P ER N YS E SYS E SYS E SYS E SYS E SYS E SYS E SYS E S AC/IN 90V~264V POWER ON/OFF TOUCH PANEL VGA MOUSE KEYBOARD AC/IN 90V~264V POWER ON/OFF TOUCH PANEL VGA MOU
Краткое содержание страницы № 12
RPD-1151/1158 User Manual 1.3 Hardware Requirement Computers Your PC must have a VGA, SVGA, or Multi sync video card and video driver already installed for the monitor. If you need to install a video card or a video driver, refer to your computer documentation for instructions. Your Macintosh will require a “mac adapter” for video. Your computer must have a 6-pin mini-DIN (PS/2 style), mouse port Your computer must have a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on
Краткое содержание страницы № 13
RPD-1151/1158 User Manual 1.4 Mounting the unit to your cabinet The unit is designed for standard 750mm and 900mm cabinets*. You may find the rear mounting kit in the carton. Please use the following combination to fit in different cabinets. For 750mm cabinets Short L-bracket x 2 Extended bracket x 2 Supporting bracket x 2 For 900mm cabinets Long L-bracket x 2 Extended bracket x 2 Supporting bracket x 2 10
Краткое содержание страницы № 14
RPD-1151/1158 User Manual 1.4.1 Mounting the HawkEye into 750 mm cabinets 1. Fasten the supporting brackets with the chassis. 2. Fasten the extended brackets with the supporting brackets and the chassis. 3. Screw the L brackets with the extended brackets. Adjust the lengh of L brackets according to your needs. 11
Краткое содержание страницы № 15
RPD-1151/1158 User Manual 4. Mount the brackets to the cabinet loosely. 5. Fasten the front screws and the rear ones. 1.4.2 Mounting the HawkEye into 900 mm cabinets Follow the same procedure as mounting the HawkEye into the 900 mm cabinet, but exchange the short L-brackets with the long L-brackets. 12
Краткое содержание страницы № 16
RPD-1151/1158 User Manual CHAPTER 2 15” MATRIX LCD FLAT PANEL 2.1 Introduction 2.1.1 Specifications LCD Screen Type TFT LCD Display Area 304.128mm(H) × 228.096mm(V) Contrast Ratio 350:1 Viewing Angle Up/down: 100 degree Left/right:120 degree Number of pixels 1024 × 768 Pixel pitch (H x W) 0.297mm × 0.297mm Response Time Rising/ Falling: 20 ms 2 Brightness 260cd/m Panel Color 16.7M Back Light 2 Lamps VESA DPMS Power Management DDC1 ＆ DDC2B Plug ＆ Play Power Consumption
Краткое содержание страницы № 17
RPD-1151/1158 User Manual 2.1.2 Factory Preset Timing for Reference Preset mode VGA 640 ×350 @ 70Hz VGA 640X400@70Hz VGA 720 ×400 @ 70Hz VGA 640 ×480 @ 60/ 72/ 75Hz SVGA 800 ×600 @ 56/ 60/ 72/ 75Hz XGA 1024 ×768 @ 60/ 70/ 72/ 75Hz 2.2 Panel Controls and OSD Functions Controls Description Power On/Off switch Soft power on/off button. Adjacent LED is lit when on. Auto Auto-synchronize and scale down display to any valid factory preset timings. Press to scroll the function you wa
Краткое содержание страницы № 18
RPD-1151/1158 User Manual 2.2.3 Contrast 1. Press the “menu” bottom. 2. Use the ▼ and ▲ bottom to scroll. 3. Press the “menu” bottom to enter. 4. Use the ▼ and ▲ bottom to adjust the contrast of the display. 5. Press the “auto” button to exit. 2.2.4 Clock 1. Press the “menu” bottom. 2. Use the ▼ and ▲ bottom to scroll. 3. Press the “menu” bottom to enter. 4. Use the ▼ and ▲ bottom to adjust the video distortion. It will appear horizontal noise on the screen while adjust the
Краткое содержание страницы № 19
RPD-1151/1158 User Manual 5. Press the “auto” button to exit. 2.2.6 Horizontal Position 1. Press the “menu” bottom. 2. Use the ▼ and ▲ bottom to scroll. 3. Press the “menu” bottom to enter. 4. Use the ▼ and ▲ bottom to move the display picture left or right. 5. Press the “auto” button to exit. 2.2.7 Vertical Position 1. Press the “menu” bottom. 2. Use the ▼ and ▲ bottom to scroll. 3. Press the “menu” bottom to enter. 4. Use the ▼ and ▲ bottom to move the display pictu
Краткое содержание страницы № 20
RPD-1151/1158 User Manual 2.2.9 OSD H-Position 1. Press the “menu” bottom. 2. Use the ▼ and ▲ bottom to scroll. 3. Press the “menu” bottom to enter. 4. Use the ▼ and ▲ bottom to move the OSD position left or right. 5. Press the “auto” button to exit. 2.2.10 OSD V-Position 1. Press the “menu” bottom. 2. Use the ▼ and ▲ bottom to scroll. 3. Press the “menu” bottom to enter. 4. Use the ▼ and ▲ bottom to move the OSD position up or down. 5. Press the “auto” button to exit
