Краткое содержание страницы № 1
2+1 SATA 6G & PATA PCI-E
COMBO HOST CARD WITH RAID
User Manual
Model: UGT-IS602R
All brand names and trademarks are properties of their respective owners.
www.vantecusa.com
Краткое содержание страницы № 2
Features and Benefits PCI-Express 2.0 x 1 (Compatible with PCI-Express 1.0) Supports communication speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps Hot plug and Hot Swap Support Native Command Queuing (NCQ) Supports Port Multiplier FIS based switching or command based switching Support ATA and ATAPI commands Compatible with SATA 6G, 3G and 1.5G Hard Drives Support RAID0 function: RAID 0, RAID 1 (only support SATA hard drives on SATA port) Supports Windows® XP/Server 2003/2008/V
Краткое содержание страницы № 3
Specifications Model: UGT-IS602R Bus interface: PCI-Express 2.0 x 1 Ports: 2 x Internal SATA 6G ports (Backward compatible with SATA 3.0Gbps & 1.5Gbps) 1 x Internal IDE/PATA port Dimension: 119 x 90 x 18mm OS Support: Windows® XP/2003/Vista/2008/7 (32/64 bit) System Requirements Windows® XP/2003/Vista/2008/7 (32/64 bit) Computer with one available PCI-e slot (CD-Rom Drive May Be Needed For Drivers) Package Contents 1 x 2+1 SA
Краткое содержание страницы № 4
2 x SATA Data Cable Layout Before Installing the Vantec 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID, please see the photo below highlighting the available SATA6G, IDE/PATA ports of the card. P1 & P2: SATA6G Ports P3: IDE/PATA Port UGT‐IS602R Page 4
Краткое содержание страницы № 5
Hardware Installation 1. Turn off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCIe slot. 4. To install the board, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. 5. Attach your internal devices to the 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID. 6. Replace the slot bracket’s holding screw to secure the card. 7. Replace the c
Краткое содержание страницы № 6
the virtual disk. Figure 1 Configuration Wizard 2. Press Space to select/unselect a disk, as shown in Figure 2. Use the arrow keys to scroll the list of free disks. Figure 2 Select Free Disks UGT‐IS602R Page 6
Краткое содержание страницы № 7
Note: The 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID supports the creation of RAID 0 and RAID 1 virtual disks comprising of exactly two SATA physical disks. PATA physical disks cannot be used to create RAID virtual disks. 3. After selecting the required disks, press Enter to continue, as shown in Figure 3. Figure 3 Confirm Disk Selection UGT‐IS602R Page 7
Краткое содержание страницы № 8
4. Create Virtual Disk by configuring its setting in the Information pane, as shown in Figure 4. The controls for making selection are listed in the Help pane when an available setting is highlighted. Figure 4 Configure Virtual Disk UGT‐IS602R Page 8
Краткое содержание страницы № 9
Note: Max size (MB) and Disk ID are properties of the virtual disk that cannot be edited. Max size (MB) in the size of the RAID virtual disk as determined by the selected RAID Level. Disk ID lists the IDs of the physical disks comprising the virtual disk. 5. RAID Level, as shown in Figure 4, is highlighted when the Create Virtual Disk screen is presented. Press Enter to select a RAID Level. A menu pops-up, as shown in Figure 5, and lists available RAID levels. 6. Scroll the list, as sh
Краткое содержание страницы № 10
Note: The default Level is RAID 0. 7. Scroll to Stripe Size and press Enter to select. A menu pops-up, as shown in Figure 6, and lists available stripe sizes for the selected RAID level. 8. Scroll the list, as shown in Figure 6, and press Enter to select Stripe Size (32K, 64K) Figure 6 Stripe Size UGT‐IS602R Page 10
Краткое содержание страницы № 11
Note: The default size is 64 KB. 9. Scroll to Gigabyte Rounding and press Enter to select. A menu pops-up, as shown in Figure 7, and lists available stripe sizes for the selected RAID level. 10. Scroll the list, as shown in Figure 7, and press Enter to select Gigabyte Rounding (None, 1G, 10G) Figure 7 Gigabyte Rounding UGT‐IS602R Page 11
Краткое содержание страницы № 12
Note: The default setting for Gigabyte Rounding is 1G. 11. Scroll to Quick Init and press Enter to enable to disable quick initialization of the virtual disk. A menu pops-up, as shown in Figure 8, and lists available options for quick initialization of the virtual disk. 12. Scroll the list, as shown in Figure 8, and press Enter to select Quick Init (Yes, No). Figure 8 Quick Init UGT‐IS602R Page 12
Краткое содержание страницы № 13
Note: The default setting for Quick Init is Yes. 13. Scroll to VD Name and the Default name is cleared for a new name, as shown in Figure 9. Type a new name and press Enter to confirm the selection. Figure 9 VD Name UGT‐IS602R Page 13
Краткое содержание страницы № 14
14. After configuring the virtual disk, scroll to Next, as shown in Figure 10. Press Enter to create the virtual disk. Figure 10 Create Virtual Disk UGT‐IS602R Page 14
Краткое содержание страницы № 15
15. Please Y to select Yes, as shown in Figure 11, to confirm the creation of the virtual disk. The virtual disk is now listed in the Topology pane, as shown in Figure 12. Figure 11 Create Virtual Disk Confirmation UGT‐IS602R Page 15
Краткое содержание страницы № 16
Figure 12 Virtual Disk in Topology Pane UGT‐IS602R Page 16
Краткое содержание страницы № 17
Managing Virtual Disks This section contains the following topics: Viewing Properties of Virtual Disk Erasing RAID Configuration Data Rebuilding Virtual Disk Deleting Virtual Disk Viewing Properties of Virtual Disk To view the properties of a virtual disk, scroll to the Virtual Disk (VD 0: Default in Figure 13) in the Topology pane. The properties of the virtual disk are displayed in the Information pane when VD 0: Default is highlighted, as shown in Figure 13. Figure 13 Virt
Краткое содержание страницы № 18
Erasing RAID Configuration Data Note: The RAID controller stores RAID configuration data on all physical disks that are part of a virtual disk. RAID configuration data must be erased on the physical disk before it can be used with another virtual disk. 1. In the Topology pane, select Physical Disk (VD 0: Default > PD 0: ST3750330MS in Figure 14) and press Enter. A menu pops-up, as shown Figure 14. 2. Select Delete to delete the virtual disk, as shown in Figure 14. 3. Select Ye
Краткое содержание страницы № 19
Figure 14 Erase RAID Configuration Data Rebuilding Virtual Disk Note: The 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID BIOS supports manual rebuilding of RAID 1 virtual disks. The rebuild process is both initiated and complete in the BIOS. The Marvell RAID Utility (MRU), which runs in an OS environment, cannot be used to either initiate, resume, or complete the rebuild process. Spare physical disks are not supported. To manually rebuild a RAID 1 virtual disk 1. When a virtual
Краткое содержание страницы № 20
changed from Functional to Degrade, as shown in Figure 15. Figure 15 Virtual Disk Properties: Degrade VD 2. Replace the faulty physical disk with an identical physical disk. Note: If an identical disk is unavailable, use a replacement physical disk or larger size or one with a slightly smaller size as determined the Gigabyte Rounding setting for the virtual disk. The 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID detects the new physical disk and lists the device under Free Physica
