Краткое содержание страницы № 1
Parallel PCI 1P
Quick Installation Guide
Introducing the Parallel PCI 1P
The Parallel PCI 1P high-speed parallel card provides
one additional parallel port to your system. Depending
on the model purchased, this board will fit into either
Full or Low Profile chassis.
Features and Benefits
• Conforms to PCI v2.2 Plug and Play
• Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
• Full support for Windows-based software
• Reduces CPU load and improves system
performance dramatically
• Support
Краткое содержание страницы № 2
Layout Depending on the model purchased, the bracket mounted on your board may vary from the image displayed. Full profile bracket Parallel Port Figure 1. Layout Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in yo
Краткое содержание страницы № 3
3. Remove your computer cover. 4. Remove the slot bracket from an available PCI slot. 5. To install the card, carefully align the card's bus connector with the selected PCI slot on the motherboard. Push the board down firmly, but gently, until it is well seated. 6. Replace the slot bracket holding screw to secure the card. 7. Replace the computer cover and reconnect the power cord. Driver Installation This section provides information on how to install the Parallel PCI 1P drivers. Windows 7 (32
Краткое содержание страницы № 4
™ Windows Vista (32-/64-bit) 1. Install the board and boot up Windows. 2. At the Found New Hardware window, insert the driver CD, click Locate and install driver software (recommended), then click Continue. 3. Click Don't search online. 4. Click Next, then click Close to complete the installation. Windows XP (32-bit) / Server 2003 (32-bit) 1. Install the board and boot up Windows. 2. At the Found New Hardware Wizard, insert the driver CD. For XP w/SP1 or earlier / Server 2003: go to step #2. Fo
Краткое содержание страницы № 5
4. Click Continue Anyway, then click Finish. 5. Restart Windows to complete the installation. Windows Server 2008 (32-bit) 1. Install the board and boot up Windows. 2. At the Found New Hardware Wizard, click Locate and install driver software (recommended). 3. Insert the driver CD. 4. Click Don't search online. 5. Click I don't have the disc. Show me other options. 6. Click Browse my computer for driver software (advanced). 7. Type D:, then click Next. (Change D: to match your CD/DVD-ROM driv
Краткое содержание страницы № 6
To Verify Windows 7 / Vista / XP / Server 2003 & 2008 Installation 1. Check in Device Manager to verify installation. For Windows 7: Right click Computer, click Manage, then click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, then click Device Manager. For Windows XP / Server 2003: Right click My Computer, click Manage, click Device Manager. For Windows Server 2008: Right click Computer, click Manage, double click Diagnostics, then click Device Manager. 2
Краткое содержание страницы № 7
To Verify Windows 2000 Installation 1. Right click My Computer, click Manage, then click Device Manager. 2. Click on the + (plus sign) in front of Ports (COM & LPT), and a SIIG CyberPro 1P PCI board should be displayed. Windows ME 1. At the Add New Hardware Wizard, select Specify the location of the driver (Advanced), click Next. 2. Check Specify a location, uncheck the other box, insert the driver CD, type in D:\Me, then click Next. (Change D: to match your CD/DVD-ROM drive letter) 3. Click Nex
Краткое содержание страницы № 8
Windows 95 1. At the Update Device Driver Wizard, click Next. 2. Insert the driver CD, and click Other Locations. 3. Type in D:\9x, click OK, then Finish. (Change D: to match your CD-ROM drive letter) 4. From the Insert Disk window, click OK. When the Copying Files dialog box appears, type in D:\9x, then click OK. (Change D: to match your CD/DVD-ROM drive letter) 5. Restart Windows to complete the installation. To Verify Windows ME / 98SE / 98 / 95 Installation 1. From the Windows desktop, doub
Краткое содержание страницы № 9
To Verify Windows NT 4.0 Installation 1. Click Start, Programs, Administrative Tools, then Windows NT Diagnostics. 2. Click Resources tab, SIIGpar should be displayed. 9
Краткое содержание страницы № 10
Blank Page 10
Краткое содержание страницы № 11
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details. If you enco
Краткое содержание страницы № 12
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCIe, PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High-quality control standards are evide
