Краткое содержание страницы № 1
2005-3-10
Краткое содержание страницы № 2
Safety and Troubleshooting Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: Disconnect the monitor from the po
Краткое содержание страницы № 3
Troubleshooting Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Common Problems Having trouble? Something not working? Before calling for help, try these suggestions. Having this Check these items problem? Make sure the Power cable is plugged into the power outlet and back of the monitor. No Picture Power button on the front of your monitor should be in the ON position. (Power LED not lit) Make sure the compute
Краткое содержание страницы № 4
Eliminate the use of a video extension cable and/or video switch box. Picture has a double image. Face the monitor toward the East for the best picture quality. heck to make sure Moire Function is switched off. Picture is not sharp. Unstable Picture Increase your refresh rate. Problem with On Screen Display Refer to the instructions and troubleshooting information in that chapter. For further assistance, refer to the Consumer Information Centers list to contact y
Краткое содержание страницы № 5
Regulatory Information CE Declaration of Conformity• Federal Communications Commission (FCC) Notice (U.S. Only) • Commission Federale de la Communication (FCC Declaration) • North Europe Information (Nordic Countries) • BSMI Notice (Taiwan Only) • Ergonomie Hinweis (nur Deutschland) Safety Precautions and Maintenance • Troubleshooting • Other Related Information CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conf
Краткое содержание страницы № 6
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATION
Краткое содержание страницы № 7
VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ
Краткое содержание страницы № 8
2. nur original-Ersatzteile verwendet werden. bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird. 3. Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem Zeichenkontrast wären die Folge). Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger. BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß ACHTUNG: NETZSTECKER UND N
Краткое содержание страницы № 9
Other Related Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information •Information for Users in the U. S. • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V. For units set at 230 V: Use a UL Listed Cord Set c
Краткое содержание страницы № 10
About This Electronic User's Manual About This Guide • Other Documents You May Need • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version. The sections are as follows: Safety and Troubleshooting Information provides tips and solutions for common problems, and oth
Краткое содержание страницы № 11
NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon indicates the potential for bodily harm and tells you how to avoid the problem. SMART HELP: This icon indicates helpful information when adjusting the On Screen Display of your monitor. Some warnings may appear in alternate formats and
Краткое содержание страницы № 12
Product Information Product Features • Lead-free product • Technical Specifications • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features Model Color 105G78 Black 105G79 Gray 105G7S Silver/Black 105G7 15-inch (14.0" VIS) color monitor with excellent front of screen performance for use with MACs and PCs Autoscan covers horizontal frequencies up to 54 kHz offering a maximum resolution of 1024 x 768 with flicker free
Краткое содержание страницы № 13
- Sync 4.7k ohm • Input signal levels 0.7 Vpp • Sync input signal TTL Sync • Sync polarities Positive and negative WHITE COLOR TEMPERATURE Chromaticity CIE coordinates: • at 9300 K x = 0.283 / y = 0.297 • at 6500 K x = 0.313 / y = 0.329 * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consump
Краткое содержание страницы № 14
RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin Pin Assignment Assignment No. No. 1 Red video input 9 NC 2 Green video input 10 Ground 3 Blue video input 11 Monitor Ground 4 Ground 12 DDC-Serial Data 5 Ground 13 H. Sync 6 Red video ground 14 V- Sync/ * VCLK 7 Green video ground 15 DDC-Serial clock 8 Blue video ground * For DDC RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor a
Краткое содержание страницы № 15
Installing your Monitor Front View • Rear View Front View 1 Power Switch 2 Power Indicator 3 Menu 4 Contrast 5 Brightness 6 Exit RETURN TO TOP OF THE PAGE Rear View
Краткое содержание страницы № 16
1. Power in - attach power cable here. Video In - this is a cable which is already attached to your monitor. Connect 2. the other end of the cable to your PC. RETURN TO TOP OF THE PAGE
Краткое содержание страницы № 17
The OSD Controls Brightness: Brightness is the overall intensity of the light coming from the screen. A 50% brightness is recommended. To adjust your screen's brightness, follow the steps below. With the menu off, press , then press to decrease brightness to increase brightness When the brightness is adjusted to the level desired, press the Exit Key. The BRIGHTNESS menu will disappear with the new adjustment saved. RETURN TO TOP OF THE PAGE Contrast: Contrast is th
Краткое содержание страницы № 18
3. Press the Menu Key again to select the function that you want to adjust. 4. Press the Up or Down Key to change the settings of the current function. 5. When the OSD window is active, it shows the input signal timing. The "H" stands for the horizontal frequency and "V" for the vertical frequency. 6. To exit and save, either press the Exit Key, or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2-4. Adjusting the Picture Icon Adju
Краткое содержание страницы № 19
6500°K/9300°K The color temperature for 6500°K is x=0.313, y=0.329 and 9300°K is x=0.283, y=0.297. It presents two different color sets on the screen. (Color Temperature) You can select 9300°K or 6500°K by pressing the Shuttle Knob . User Color If the 9300°K normal white or 6500°K warmer (Red/Blue) white do not satisfy your desire, properly adjust R.B GAIN controls to obtain your optimum whiteness level. Degauss If color impurity occurs when moving or swiveling the monitor,
Краткое содержание страницы № 20
Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: PACIFIC: Australia • New Zealand ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia • Pakistan • Philippines • Singapore • Taiwan • Thailand AFRICA: Morocco • South Africa MIDDLE EAST: Dubai • Egypt
