Краткое содержание страницы № 1
'
USER SMANUAL
COLOR MONITOR
Model No : CTL 5xn
Краткое содержание страницы № 2
IMPORTANT SAFEGUARDS 1. Read all of these instructions. 12. For added protection for this monitor during a lightning storm, or when it is left 2. Save these instructions for later use. unattended and unused for long periods of time, unplug it from the wall outlet. This 3. Unplug this monitor from the wall will prevent damage to the set due to outlet before cleaning. Do not use liquid lightning and powerline surges. cleaners or aerosol cleaners. Use a damp cloth for cleaning. 13. Do not overload
Краткое содержание страницы № 3
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
Краткое содержание страницы № 4
The power cord is used as a main disconnect device. Disconnect the power cord before servicing. The outlet must be installed near the monitor and must be easily accessible. As an ENERGY STAR Partner, Daewoo Electronics Co., Ltd. has determined that this product meets the Energy Star guidelines for energy efficiency.
Краткое содержание страницы № 5
CONTENTS Introduction 1 Product Features 2 Setup 3 Installing the Tilt/Swivel Stand 3 Connecting the D-Sub Signal Cable 4 Connecting to Your Macintosh Computer 4 Connecting the Power Cord 4 Power Management System 5 DDC for Plug & Play 5 Operation & Adjustment 6 Specifications 9 Factory Preset Timings 10 Troubleshooting 11 Appendix Description for D-sub Connector
Краткое содержание страницы № 6
English INTRODUCTION This manual explains how to correctly install, operate and get the best performance from your monitor. Please read this user's manual carefully before installing your monitor, then keep it near your monitor for quick reference. First, please check that the contents of the carton box corresponds with the following checklist : ¡ Color monitor ¡ Power cord ¡ Tilt/swivel stand ¡ User's manual ¡ Warranty Handbook ¡ Warranty Registration Card If there is any item missing or damag
Краткое содержание страницы № 7
PRODUCT FEATURES ¡ The convenient and user-friendlly on-screen display allows for easy and accurate adjustments of horizontal and vertical screen size and position, geometry and screen color. ¡ The monitor supports a safe working environment in strict compliance with the MPR¥–standard for low emissions. ¡ The monitor complies with the VESA Display Data Channel (DDC) specification for “Plug & Play” compatibility. Advanced microcircuitry makes set-up and configuration fast and effortless. ¡ The mo
Краткое содержание страницы № 8
FRONT English SETUP INSTALLING THE TILT/SWIVEL STAND 1. Ensure that the power to the monitor is off. 2. Set the monitor face down with the underside facing you. Please be careful so as not to scratch the monitor screen. 3. Align the four hooks on the stand with the guide holes of bottom chassis of the monitor. 4. Insert the hooks into the guide holes. 5. Slide the tilt/swivel stand toward the front of the monitor until the latch locks in position. 6. Turn the monitor and the stand upright. 2 PUS
Краткое содержание страницы № 9
CONNECTING THE D-SUB SIGNAL CABLE 1. Turn off the computer and monitor. 2. Connect the 15 pin D-sub connector to the output port of the video card in your computer. 3. Tighten the screws of connector. CONNECTING TO YOUR MACINTOSH COMPUTER 1. Turn off the computer and monitor. 2. Attach the Macintosh cable adapter to the Macintosh video card. 3. Tighten the screws on the cable adapter. 4. Connect the signal cable provided with your monitor to the other end of the Macintosh cable adapter. 5. Tight
Краткое содержание страницы № 10
English POWER MANAGEMENT SYSTEM If you use the monitor with a computer which complies with the power saving program, you can set the monitor to go blank when the system has remained unused for a period of time. To specify the period or to disable this feature, set the system timeout field of the computer's system setup program or use special software for power saving. See the computer user's manual for the details of using the system setup. While the monitor is in power saving mode (blank screen
Краткое содержание страницы № 11
OPERATION & ADJUSTMENT –+ EXIT ADJUST SELECT MENU : Launch OSD(On-Screen Display) Menus MENU : Select the next function : Select the previous function + : Increase the value of any selected function – : Decrease the value of any selected function EXIT : Exit OSD Menus & Launch OSD Menus, when no OSD Key Process MENU 1024X768 60Hz 1024X768 60Hz CONTRAST CONTRAST BRIGHTNESS BRIGHTNESS H.POSITION H.POSITION H.SIZE H.SIZE V.POSITION V.POSITION V.SIZE V.SIZE 50 50 –+ –+ Register Value change Register
Краткое содержание страницы № 12
English 1. OSD(On-Screen Display) Menu 1 Adjust the contrast of image, the CONTRAST difference between light and dark areas on the screen. 50 Adjust the brightness of the entire BRIGHTNESS display. 50 Adjust the position of the display horizontally H. POSITION (left or right). 50 Adjust the display width (horizontal size). H. SIZE 50 Adjust the position of the display vertically V. POSITION (up or down). 50 Adjust the display height (vertical size). V. SIZE 50 7
Краткое содержание страницы № 13
2. OSD (On-Screen Display) Menu 2 Adjust the left and right margins for more convex or more concave margins. PINCUSHION + ƒUImage turns to by . 50 – ƒUImage turns to by . Adjust the trapezoid of the screen by moving TRAPEZOID the lines inward or outward. + 50 ƒUImage turns to by . – ƒUImage turns to by . Choose different preset color temperatures or COLOR TEMP. set your own customized color parameters. USER 9300 6550 Adjust the red gain. R. GAIN 50 Adjust the
Краткое содержание страницы № 14
English SPECIFICATIONS Picture Tube Type :15-inch, Flat Square Tube type (14-inch, viewing area) Dot Pitch : 0.28mm, MPR ¥– Face Treatment: Non-glare/Anti-static Video Input Signal : R.G.B Analog Amp. Bandwidth : 60 MHz Input Sync : TTL, separate negative/positive Scan Frequency Horizontal : 30 - 54 KHz Vertical : 50 - 120 Hz Max. Resolution 1024 dots¡¿768 lines. (at 60 Hz) Power Source Free Voltage (100-240 Vac, 50/60Hz) Display Area Standard Display Area : 264mm(H)¡¿198mm(V) Full Screen Siz
Краткое содержание страницы № 15
Tilt /Swivel Range Tilt : 5¡£ forward, 10¡£ backward Swivel : ¡ 45¡£ leftward, rightward Dimension 368(W)¡¿394(D)¡¿382(H)mm (set with stand) Weight (net/Gross) 27.6/31.4 lbs 12.5/14.2Kg Operating Environment Temperature : 10~4˚C/50~104˚F Relative Humidity : 8~80% Storage Environment Temperature : -20~45˚C/-68~113˚F Relative Humidity : 5~90% FACTORY PRESET TIMINGS Resolution Mode H.Freq (KHz) V. Freq (Hz) Remark (dots¡¡¿¿lines) VGA 720¡¿400 31.5 70 Non-interlaced VGA 640¡¿480 31.5 60 Non-interlac
Краткое содержание страницы № 16
English TROUBLESHOOTING Symptom Check No picture. Check if POWER SWITCH and COMPUTER POWER SWITCH are in the on position. ‹q Check if the signal cable is correctly connected to the video card. ‹q Check if the pins of D-sub connector are not bent. ‹q Check if the computer is in the power saving mode. POWER LED is not lit. Check if POWER SWITCH is in the on position. ‹q Check if the power cord is correctly connected. Image is unstable. Check if the signal cable is suitable to the video card.
Краткое содержание страницы № 17
APPENDIX DESCRIPTION FOR D-SUB CONNECTOR Pin Signal 1 1 Red 2 Green 3 Blue 6 10 4 GND 5 GND (Self -Test) 15 6 GND - Red 7 GND - Green 8 GND - Blue 9 No Pin 10 GND - H.Sync 11 GND-V.Sync 12 Bi-directional Data (SDA) 13 Horizontal Sync 14 Vertical Sync (VCLK) 15 Data Clock (SCL) *GND = Ground
Краткое содержание страницы № 18
S/N: 9978623903
