Краткое содержание страницы № 1
19T2 19T2 19T2 19T2
Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm
BETRIEBSANLEITUNG BETRIEBSANLEITUNG
BETRIEBSANLEITUNG BETRIEBSANLEITUNG
OPERATING MANUAL OPERATING MANUAL
OPERATING MANUAL OPERATING MANUAL
Краткое содержание страницы № 2
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • unsere Hotline: Mo-Fr: 9 - 18 Uhr Sa: 9 - 14 Uhr Tel.: ++49 (0) 180 3777 000 • einen unserer Servicepartner • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Die Adressen Ihrer Servicepartner finden Sie im Garantieheft oder im Service-Adressenheft. Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Is there ... ... any technical problem or o
Краткое содержание страницы № 3
Краткое содержание страницы № 4
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-K616-Z100-1-5E19 A26361-K616-Z100-1-5E19 A26361-K616-Z100-1-5E1
Краткое содержание страницы № 5
Deutsch English Français 19T2 Farbbildschirm Color monitor Español Moniteur couleur Monitor de color Italiano Monitor a colori Färgskärm Svenska Kleurenbeeldscherm Nederlands TCO'99 Betriebsanleitung Operating Manual Ausgabe Juli 2000 July 2000 edition
Краткое содержание страницы № 6
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards Association. Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten. Copyright Fujitsu Siemens Computers GmbH 2000 VESA, DDC
Краткое содержание страницы № 7
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes .................................................................................................................................2 Safety ....................................................
Краткое содержание страницы № 8
Краткое содержание страницы № 9
Introduction Your new 19T2 monitor supplies you with a high-quality color image with high resolution and ergonomic refresh rates. It possesses a whole range of useful features and functions, e. g.: • 19" (46 cm) high-resolution Trinitron CRT (0.24 - 0.25 mm dot pitch of the slot mask) • automatic scanning of all horizontal frequencies from 30 to 107 kHz and all refresh rates (vertical frequencies) from 48 to 120 Hz • digital screen controller with microprocessor for storing 25 different display
Краткое содержание страницы № 10
Color monitor 19T2 Important notes In this chapter you will find information regarding safety which is essential to take note of with your monitor. ! The chapter also contains information on the licenses issued for your equipment. Safety This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our customer service center. • If the device i
Краткое содержание страницы № 11
Color monitor 19T2 • You may set only those resolutions and refresh rates specified in the "Technical data" chapter. Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or customer service center. • Keep this Operating Manual together with your device. If you pass on the device to third parties, you should include this manual. Cleaning note19T2 • Always pull out the power plug before you clean the monitor. • Do not clean any interior parts yourself, leave th
Краткое содержание страницы № 12
Color monitor 19T2 Note on X-ray radiation This device complies with the German X-ray regulations (Röntgenverordnung - RöV). The local dosage emitted is less than 1 µSv/h (micro-Sievert per hour) at a distance of 0.1m. Important note on power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. • The female/male receptacles of the cord set must meet CEE-22 requirements. • The cable has to be HAR-certified or
Краткое содержание страницы № 13
Color monitor 19T2 Disposal and recycling This device has been manufactured to the greatest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The CRT contains no cadmium The device is taken back after use, to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not reclaimed will be disposed of in an environmentally acceptable manner. We herewith declare that it will be possib
Краткое содержание страницы № 14
Color monitor 19T2 Installing an ergonomic video workstation Before you set up your equipment you should select a suitable position for working at the monitor. Please observe the following advices when installing a video workstation. edge of desk permissible permissible reaching sector reaching sector 600 mm 600 mm Avoid direct and reflected glare. Avoid glare from electric Position the keyboard where it lighting. is easiest to reach. preferable viewing sector approx. 90° 65° 0° 30° 60° 30° appr
Краткое содержание страницы № 15
Color monitor 19T2 1 2 1 = Power connector 2 = Data cable Ê Be sure that the monitor and the system unit are switched off. The system unit's power plug must be pulled out! ! Ê Connect the connector of the data cable to the (active) monitor port on the system unit and secure the plug-in connection by tightening the safety screws. If your system unit has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is usually active. i
Краткое содержание страницы № 16
Color monitor 19T2 Operation of the monitor 1 = Control panel with buttons for screen 3 2 setting 1 2 = Power indicator 3 = ON/OFF switch Switching the monitor on Ê Press the ON/OFF switch (3). The power indicator (2) lights up green when the system unit is turned on. If your PC has a power management function (energy-saving mode), you should read the "Notes on power management" of the monitor in this chapter. i When you start your system, several mode changes will usually be carried out when va
Краткое содержание страницы № 17
Color monitor 19T2 If your PC detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption. The power indicator of the monitor changes color to indicate the status change. If there is still no input, power consumption is further reduced (OFF mode). Once an input is made at the PC the screen contents are redrawn and full power is restored. The length of the individual stages is determined by the power management system of the PC. For detailed informa
Краткое содержание страницы № 18
Color monitor 19T2 Operating the OSD menu To set the OSD menu, perform the following steps: Ê Briefly press the Menu button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions. Ê Select the desired symbol with the arrow buttons and ,e.g. GEOMETRY. MENU OK (If you wish to exit the OSD menu, select EXIT.) EXIT The selected symbol has a colored SIZE/CENTER marking. GEOMETRY Ê Press the Menu button to display the COLOR appropriate options window. CONVER
Краткое содержание страницы № 19
Color monitor 19T2 Setting the brightness of the background Setting the contrast between the foreground and background Setting picture position and size (SIZE/CENTER) The set values for the picture position and size are only saved for the current input signal. Calling the SIZE/CENTER setting window Horizontal picture position (H CENTER): Shifting the picture to the left or to the right Vertical picture position (V CENTER): Shifting the picture down or up Horizontal picture size (H SIZE): Making
Краткое содержание страницы № 20
Color monitor 19T2 Trapezoid distortion (KEYSTONE): Making the bottom edge narrower and the top edge wider or making the top edge narrower and the bottom edge wider Parallelogram distortion (KEY BALANCE): Reducing the angle of the left and right sides Setting color temperature and colors (COLOR) The "warmth" of the screen colors is set using the color temperature. The monitor has two fixed color temperatures (K = Kelvin). In addition, a user-defined fine calibration of the colors can also be car
