Краткое содержание страницы № 1
User’s Manual
MultiSync LCD3215
MultiSync LCD4215
MultiSync LCD4615
Краткое содержание страницы № 2
Index Important Information ................................................................................................................................... English-1 Warning, Caution ................................................................................................................................ English-1 Registration Information ............................................................................................................................... English-1 Safety Prec
Краткое содержание страницы № 3
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE
Краткое содержание страницы № 4
Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specified cables with the MultiSync LCD3215 (L327HP)/MultiSync LCD4215 (L427HQ)/MultiSync LCD4615 (L467HZ) color monitor so as not to interfere with radio and televis
Краткое содержание страницы № 5
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE Recommended Use FOLLOWING WHEN SETTING UP AND USING • For optimum performance, allow 20 minutes for warm-up. THE MULTI-FUNCTION MONITOR: • Rest your eyes periodically by focusing on an object at least • DO NOT OPEN THE MONITOR. There are no user 5 feet away. Blink often. serviceable parts inside and opening or removing covers • Position the monitor at a 90° angle to windows and other may expose you to dang
Краткое содержание страницы № 6
Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Clamp x 2 1 • Power Cord* • Screw for clamp (M4 x 8) x 2 •Video Signal Cable • Screw for main switch cover (3 x 6) x 2 • Setup Manual • CD-ROM •Wireless Remote Control and AAA Batteries • Thumbscrew for stand x 2 (LCD4215 and LCD4615 only) • Main switch cover Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) Screw for clamp Screw for main switch (M4 x 8) x 2 cover (3 x 6) x 2 Thumbscrew for stand x 2
Краткое содержание страницы № 7
Installation This device cannot be used or installed without the Tabletop Orientation Stand or other mounting accessory for support. For proper • When using the display in the portrait position, the installation it is strongly recommended to use a trained, monitor should be rotated clockwise so that the left side NEC authorized service person. Failure to follow NEC is moved to the top and the LED indicator light is on the standard mounting procedures could result in damage to the bottom. This wi
Краткое содержание страницы № 8
3. Ventilation Requirements Attaching Mounting Accessories When mounting in an enclosed space or recessed area, The display is designed for use with the VESA mounting leave adequate room between the monitor and the system. enclosure to allow heat to disperse, as shown below. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories. VESA Mounting Interface 200 mm 4. Prevent Tipping When using the display with the Tabletop Stand fasten the LCD to a wall using a
Краткое содержание страницы № 9
Parts Name and Functions Control Panel OFF ON POWER button ( ) DOWN ( ) button Switches the power on/off. See also page 18. Acts as button to move the highlighted area down to select adjustment items within OSD menu. MUTE button EXIT button Switches the audio mute ON/OFF. Activates the OSD menu when the OSD menu is turned-off. Acts as EXIT button within the OSD to move to previous INPUT button menu. Acts as SET button within OSD menu. Toggle switches between [RGB1], [RGB2], [RGB3], [DVD/HD]
Краткое содержание страницы № 10
Terminal Panel AC IN connector AUDIO OUT Connects with the supplied power cord. To output the audio signal from the AUDIO IN 1, 2 and 3 jack to an external device (stereo receiver, amplifier, etc.). RGB1 IN (DVI-D) VIDEO INPUT/OUTPUT Connector To input digital RGB signals from a computer or HDTV device having a digital RGB output. VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA connectors are not * This connector does not support analog input. available at the
Краткое содержание страницы № 11
Wireless Remote Control PIP (Picture In Picture) button ON/OFF button: Toggle switches between PIP and POP (Picture Out Picture). See page 22. INPUT button: Selects the “picture in picture” input signal. CHANGE button: Replaces to the main picture and sub picture. NOTE: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”. Sub picture RGB1 RGB2 RGB3 DVD/HD VIDEO(S) VIDEO RGB1 - - - - RGB2 - - - - RGB3 - - - - DVD/HD - - - - VIDEO(S) -- VIDEO -- PIP POP OFF STILL
Краткое содержание страницы № 12
Operating Range for the Remote Control Point the top of the remote control toward the LCD monitor’s remote sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.) from the front of the LCD monitor’s remote control sensor or at a horizontal and vertical angle of within 30° within a distance of about 3.5 m (10 ft.) Caution: Important, the remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor of th
Краткое содержание страницы № 13
Setup NEC recommends the following battery use: 1. Determine the installation location • Place “AAA” size batteries matching the (+) and (-) signs CAUTION: Installing your LCD display must be done by a on each battery to the (+) and (-) signs of the battery qualified technician. Contact your dealer for compartment. more information. • Do not mix battery brands. CAUTION: MOVING OR INSTALLING THE LCD MONITOR • Do not combine new and old batteries. This can shorten MUST BE DONE BY TWO OR MORE PEOPL
Краткое содержание страницы № 14
5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required. 8. Adjust the screen (See pages 21 and 22) Make adjustments of the screen display position when necessary. 9. Adjust the image (See page 21) Make adjustments such as brightness or contrast when required. 10. Rec
Краткое содержание страницы № 15
Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram BNC-to-RCA adapter BNC x 3 DVD player RCA To DVD Component To audio output video output RCA BNC x 3 BNC x 5 Personal computer RCA Mini D-sub 15 pin To analog RGB output To audio output RCA To audio output To DVI output VCR To composite Output DVI-D connector In case of VCR Equipment with To
Краткое содержание страницы № 16
Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards and a pixel clock over 165MHz may not display an image correctly. Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically. Scanning frequency Remarks Resolution Horizontal Vertical LCD3215/LCD4215 LCD4615 640 x 480 31.5kHz 60Hz 800 x 600 37.9kHz 60Hz 1024 x 768 48.4kHz 60Hz 1
Краткое содержание страницы № 17
Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface that complies with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The RGB1 connector also accepts a DVI-D cable. • Input TMDS signals conforming to DVI standards. •To maintain display quality, use a cable that conforms to DVI standards. • AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [AUD
Краткое содержание страницы № 18
Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user’s manual for more information. Connect the LCD Monitor to a DVD Player •To connect the DVD/HD IN connector (BNC) on the LCD monitor, use an BNC connector cable (sold separately). Some DVD players may have different connectors such as DVI-D connector. Select [DVI-HD] mode from the “DVI MODE” menu. For mode selection, see “DVI MODE” on page 2
Краткое содержание страницы № 19
Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner’s manual for more information. Connect the LCD Monitor to a Stereo Amplifier •Turn on the LCD monitor and the amplifier only after all connections have been made. • Use a stereo Mini-RCA cable to connect the AUDIO OUT connector (Stereo Mini Jack) on the LCD monitor to the audio input on the amplifier. • Do not reverse the audio left and right jacks. • The AUDIO IN is used for
Краткое содержание страницы № 20
Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD. Power Button Main Power Switch OFF ON Using the remote control English-18
