Краткое содержание страницы № 1
15"/17"" /19 TFT-LCD monitor
USER MANUAL
www.viewera.com
V152/V174/V192
Краткое содержание страницы № 2
TABLE OF CONTENTS Important Safety Instructions…………………………………………………………………………………… 1 13 ．Introduction …………………………………………………………………………………………………… 1.1 General information3 ……………………………………………………………………………………… 1.2 Features3 …………………………………………………………………………………………………… 1.33 package contents…………………………………………………………………………………………………… 24 ． Installing the monitor………………………………………………………………………………………… 2.1 Assembly4 …………………………………………………………………………………………………… 2.2 Signal cable con
Краткое содержание страницы № 3
Important Safety Instructions 1. Read the manual carefully before using the monitor. 2. Save these user manual for later use. 3. Unplug the monitor from the power source when you clean the monitor. Don't use liquid cleaners or aerosol cleaners.Use cloth to clean it. If it doesn't do, please use LCD screen cleaners. 4. Don't use attachment not recommended as they may cause hazards. 5. Please grasp the plug to unplug the connector from the wal
Краткое содержание страницы № 4
12. Please make sure that the outlet and power cord can afford the total electricity of the products. 13. Place the monitor in safe place where the cord will not be abused by persons working on it. 14. Follow all the warnings and instructions illustrated on the manual. 15. Don't overload the wall outlets and extend cords as this can result in fire or electric shocks. 16. Don't remove or open the cover to service this monitor yourself. It may
Краткое содержание страницы № 5
1. Introduction 1.1 General Information This monitor isa high-performance intelligent multi-scanning color monitor .It is with TFT LCD screen and MCU digital control without radiation and glary. The shape is tiny and thin adapting to small places,save your more place. 1.2 Features Color:16.7M Power saving compliant with EPA energy star and VESA DPMS. Auto color balance .When connected to different graphic adapter,the monitor can calibrates t
Краткое содержание страницы № 6
If any of above listed items are missing, please contact your dealer for technical support. 2. Installing the monitor Please consider the following advice before you install your monitor. Position Choosea place that reflects less to place your monitor. Generally ,there isa suitable angle witha window. Highness The peak of the monitor should be a little lower than your VGA cab le Powerc ord eyes when you sit down. DVI cable (Optional) Aud io
Краткое содержание страницы № 7
2.2 Signal cable connection Plug one connector of the signal cable into the VGA or DVI port and lockf the two bolts to ensure irm grounding.Then plug the other one into the monitor and lock the two bolts. 2.3 Power cord connection Plug one side of the power cord into the AC adapter and the other side into AC power source outlet, then plug the output side of the AC adapter into the power port at the side of monitor. 2.4 Audio cable connection
Краткое содержание страницы № 8
2.7 Adjust the picture In order to obtain the best visual display, you need adjust it, please refer to chapter3" the Operation of the monitor ". 3.Operation OSD control panel Fig.4 is elevation. Other models differ in key-press position and front panel. 3.1 Power on/off switch This is a slight touch digital control key. It is used to turn the monitor on or off. 3.2 Power LED indicator When the monitor is working, the power LED is green or bl
Краткое содержание страницы № 9
3.4 OSD menu 3.4.1 The meaning of the menu in VGA mode [as Fig.5]: 1. auto adjustment 2. brightness 3. contrast 4. H-position 5. V-postion 6. clock 7. phase 8. signal source 9. color adjustment S 10. volume (optional) 11. sharpness 12. OSD position/transparence 13. recall CONTRAST 14. language 15. exit 16. selected function name 17. resolution 18. H-frequency 19. V-frequency 20. progressive bar of adjustment 1024X768H：： 48.0KHZZ V 60.0H 21.
Краткое содержание страницы № 10
3.4.2 The meaning of the menu in DVI mode [as Fig.6] 1. brightness 2. contrast 3.sharpness 4. volume(optional) 5.OSD menu display time 6. transparence 7.OSD position 9300 8. signal source 9. 9300k 10. 7800k 11. 6500k 12. User 13. Recall 14. Language 7800 BRIG HTN ESS 15. Eixt 16.selected function name 6500 17. resolution 18. H-frequency 19. V-frequency USER 20. progressive bar of adjustment 1024X768H：： 48.3KHZZ V 60.0H 21. precentage of adju
Краткое содержание страницы № 11
3.4.3 Function table Display contents Function Auto adjustment Automatically adjust to obtain the best setting Brightness Adjust the brightness Adjust the contrast Contrast H-position Move the screen toward left or right V-position Move the screen toward upward or downward Adjust the frequency of pixel Clock Adjust the phase of pixel clock Phase Sharpness Adjust the sharpness of the picture Adjust the colors of the picture Color 9300K Set 93
Краткое содержание страницы № 12
3 3..4 4..42 S Sp pec eciia all ffu un nct ctiion on 1 1.. C Col olo orr a ad djju ust stm me en ntt(( ) ):: w wh he enn tth hee ffu un nc cttiio on n iis s selec selectte ed d,, t the he m mon oniitto orr w wiillll c com ome e iin ntto o tth he e s su ub b- -m men enu u[[ F Fiig g..7 7 ]],, tth he er re e a are re OSD H-POSITION fi fiv vee ffu un nc cttiion onss tth ha att ca can n b be e s se elle ec ctte ed d:: a a,,93 930 00 0k; k; b b,,
Краткое содержание страницы № 13
5.Sharpness adjustment( ): Adjust the sharpness of the picture on the screen. 3.5 Safety mode When the video signal exceeds the frequency range of the monitor , the monitor MCU will stop horizontal and vertical scanning in order to protect the monitor. Fig.11 will be display on the screen. After a few seconds, the monitor will enter turn-off mode. You need restart the computer and reset the frequency range. OUTOFR ANGE OUT OF RANGE WORK INGF
Краткое содержание страницы № 14
Recommended mode: 1024×768@60Hz V174/V192 NO. Mode Resolution Ver.frequency Hor.frequency Pixel clock 1 60Hz 25.175MHz 31.5KHz 2 640×480 72Hz 31.5MHz 37.9KHz VGA 3 75Hz 31.5MHz 37.5KHz 60Hz 40MHz 37.9KHz 4 5 48.1KHz SVGA 800×600 72Hz 50MHz 6 75Hz 46.9KHz 49.5MHz 60Hz 65MHz 48.4KHz 7 1024×768 8 70Hz 75MHz 56.5KHz 9 1024×768 75Hz 78.75MHz 60KHz XGA 75Hz 10 1152×864 108MHz 67.5KHz 11 1280×960 60Hz 105MHz 60KHz 12 60Hz 108MHz 64KHz SXGA 1280×102
Краткое содержание страницы № 15
3.7 Plug& Play This monitor meets the standard of VESA DDC. When using video card with VESA DDC1/2B,it will auto-scan video frequency, output power, function and other data to PC when computer is on .It will go to proper conn- ection mode and proper resolution frequenc y. 3.8 Power management This monitor complies with EPA energy star requirement and meets VESA DPMS standard. The following is the description of the power indicator for the po
Краткое содержание страницы № 16
Model V152 V174 V192 Max. resolution 1024×768@75Hz 1280×1024@75Hz 1280×1024@75Hz Input resistance 753±％Ω 753±％Ω 753±％Ω H-frequency 30KHz～60KHz 30KHz～81KHz 30KHz～81KHz V-frequency 55Hz～75Hz 55Hz～75Hz 55Hz～75Hz Power supply for Adapter 100V-240VAC 60Hz/50Hz 100V-240VAC 60Hz/50Hz 100V-240VAC 60Hz/50Hz Power supply for monitor 12VDC 3.3A 12VDC 4.2A 12VDC 4.2A Rated voltage and MAX.Consumption 12VDC 30W 12VDC 40W 12VDC 45W Input connector 15 pins
Краткое содержание страницы № 17
Note： This specification is subject to change without notices. 5. Dead Pixel Policy Dead pixels on the TFT LCD panel are sometimes inevitable. ViewEra guarantees that the monitor will be replaced if the number of dead pixels on our monitor is more than5 pixels. No dead pixel warranty may be provided during the pr- omotion period. 6. Warranty& Customer Service Warranty ViewEra warrants the monitor for one year on parts, labor and the LCD pane
Краткое содержание страницы № 18
For 1024X768, please set to“” XGA 1024 X 768 @75Hz 8. Trouble Shooting 1) Power on but no picture →Make sure the VGA cable is tightly connected from the video output connector on the video card to the video input connector on the monitor. → Make sure you are using the standard power adapter coming with the monitor. → Check your video card if the driver is correctly installed. If there is no video signal from the video card,“” O INPUT SIGNAL
Краткое содержание страницы № 19
→ LCD monitor has a native resolution which pixels are produced by cells in fixed positions. When a resolution different from the native resolution is chosen, the LCD monitor uses various interpolation methods to achieve the pseudo resolution. To achieve the optimu- m viewing quality, choose the native resolution of the panel is recommended. → Use“” Auto Tuning function to adjust image quality on the OSD menu or you can hold button2 for3 sec
