Краткое содержание страницы № 1
2-Line
™
V ViiS SY YSS
Speakerphone
User’s Guide
25214
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in com- pliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for TelephoneTerminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.You must, upon reques
Краткое содержание страницы № 4
The telephone company may make changes in its communications facilities, equipment, operations or proce- dures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the
Краткое содержание страницы № 5
Table of Contents Equipment Approval Information 2 - Mute 17 - Do Not Disturb 17 Interference Information 3 - Flash 18 Licensing 3 - Inserting a Pause in the Dialing Hearing Aid Compati
Краткое содержание страницы № 6
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Parts Checklist Make sure your package includes the following items: Coiled Handset Cord Corded Handset AC power Short Line Cord Telephone adaptor 2- Line cords (for base) 5
Краткое содержание страницы № 7
Telephone Jack Requirements To use this phone, you will need a RJ11C (for a single line) or a RJ14C (for two lines) type modular phone jack, which might look like the one pictured here, installed in your home or office. If you find don’t have either modular jack, call your local phone company to find out how to get one installed. Wall plate Modular telephone line jack 7 Important Installation Guidelines • Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave
Краткое содержание страницы № 8
Phone Layout Display Volume +/- Message Waiting 3 Soft Keys Prev Key Next Key One-Touch Memory Log Directory, Caller ID DND/Delete, Exit Redial, Flash Tone Headset, Hold, Pause Line1, Speakerphone Mute Line 2 7
Краткое содержание страницы № 9
Installing the Phone The phone may be connected by a single two-line cable or two single line cables. 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. 2. Install 5 AAA-size alkaline batteries (not included) for back up power in the event of a power failure. • Insert a flat-head screwdriver or similar object into the battery door latch and g
Краткое содержание страницы № 10
Or, you can use the 2 single telephone lines plug into the 2 jacks on the back of the telephone. Line 1 Line 2 If you have Line 1 and Line 2 wired into one wall jack in your home or office, you can use one of the supplied telephone line cords to connect from the wall jack to the Line 1 + 2 jack on the back of the phone as shown below. Line 1 + 2 5. If you want to mount the telephone on the wall, you can plug the 2 lines such as the below drawing; Line 2 Line 1 9
Краткое содержание страницы № 11
-OR- Line 2 Line 1 -OR- Line 1 & 2 6. Connect the handset cord: Connect one end of the coiled handset cord to the jack on the side of the base and the other end into the jack in the handset, and place the handset in the cradle. 10
Краткое содержание страницы № 12
Programming the Phone Standby Screen The phone displays the current date, time and the Soft keys. NOTE: The Soft keys will change according to the status of the unit. NOTE: The LCD has a dedicated “SET CLOCK” icon flashing when the clock is not set. Please go to menu “Phone Setting- Date /Time” to set the clock. If you subscribe to Caller ID services from your telephone service provider, your clock will be set automatically each time you receive a phone call. However, you will need
Краткое содержание страницы № 13
Delete button to backspace and delete numbers, if necessary. 12:00AM 01/01/10)
Краткое содержание страницы № 14
Note: The line 1 default ring tone is melody 1 and the line 2 default is melody 2.
Краткое содержание страницы № 15
Key Tone From the Sound Settings Menu: 1. Use the VOL (- or +) button to scroll to Key Tone. 2. Press the OK Soft key. 3. Use the VOL (- or +) button to scroll to select either On or Off. 4. Press the OK Soft key to select. 5. A confirmation tone will indicate that your selection has been saved. Note: the default setting is On. Dial Mode From the Phone Settings Menu: 1. Use the VOL (- or +) button to scroll to Dial Mode. 2. Press the OK Soft key. 3. Use the VOL (- or +) button to scroll to selec
Краткое содержание страницы № 16
Warning: Pressing OK will return phone to its default state. This will reset date/time and all menu settings to default.
Краткое содержание страницы № 17
Telephone Operation Making Calls with the Corded Handset 1. Pick up the handset. The unit will automatically select the available line. If both lines are available, Line 1 will be used first. -OR- Press the Line1 or Line 2 button and then pick up the corded handset to select the desired line 2. Wait for a dial tone, and then dial a phone number using dial-pad, the directory or a one-touch speed dial. 3. Hang up the handset when finished. Making Calls in Speakerphone Mode 1. Press the spe
Краткое содержание страницы № 18
This feature is set at individual telephones to disable (silence) an incoming ring signal. When there is an incoming call , the status indicators will function, but the phone will not ring.
Краткое содержание страницы № 19
Flash If you subscribe to Call Waiting service from your telephone service provider and you receive an incoming call on while a call is currently active on the same line, you will hear an audible tone to indicate another call is waiting. Also, Caller ID information (if available) for the waiting call will be displayed. 1. To connect to the waiting call, press the Flash button on your phone. This will place the origian call on hold and connect you to the new incoming call. 2.To switch b
Краткое содержание страницы № 20
6. You can edit the telephone number by using the Delete button and number keys.
