ملخص المحتوى في الصفحة رقم 1 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 2 
                    
                        PR & OS Owner’s Manual                                                                                ABOUT THIS MANUAL    ® THANK YOU for purchasing a BILLY GOAT  Power Rake/Overseeder. Your new machine has been carefully  designed and manufactured to provide years of reliable and productive service. This manual provides complete  operating and maintenance instructions that will help to maintain your machine in top running order. Read this  manual carefully before assembling, operating, or serv
                    
                    ملخص المحتوى في الصفحة رقم 3 
                    
                        PR & OS Owner’s Manual           SERIAL PLATE DATA    Record the model number, serial number, date of    purchase, and where purchased.    Purchase Date:    Purchased From:                  Specifications                          PR550                PR550H                 OS551                  OS551H                 PR550T               PR550HT      Engine: HP 5.5 (4.1 kW) 5.5 (4.1 kW) 5.5 (4.1 kW) 5.5 (4.1 kW) 5.5 (4.1 kW) 5.5 (4.1 kW)  Engine: Model 1104020191 GX160T1QX2 1104020191 GX160T1QX
                    
                    ملخص المحتوى في الصفحة رقم 4 
                    
                        PR & OS Owner’s Manual            GENERAL SAFETY INSTRUCTIONS and SYMBOLS  The safety symbols shown below are used throughout this manual. You should become familiar with them before  assembling, operating, or servicing this equipment.  This symbol indicates important information that will prevent injury to yourself or others.      This symbol indicates ear protection is recommended when operating this equipment.      This symbol indicates eye protection is recommended when operating this equipm
                    
                    ملخص المحتوى في الصفحة رقم 5 
                    
                        PR & OS Owner’s Manual        DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is  recommended.    DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least  two minutes before refueling.  DO NOT store gasoline near an open flame.  DO NOT remove gas cap while engine is running.  DO NOT start or operate engine if strong odor of gasoline is present.  DO NOT start or operate engine if gasoline is spilled. Move equipment away fr
                    
                    ملخص المحتوى في الصفحة رقم 6 
                    
                        PR & OS Owner’s Manual         SOUND                      SOUND LEVEL 82 dB(a) at Operators Position      Sound tests were conducted in accordance with 2000/14/EC, and were performed on 2-13-2002 under the  conditions listed below.    Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on  the unit for the sound power level for your model.      General Conditions:                                                                         
                    
                    ملخص المحتوى في الصفحة رقم 7 
                    
                        PR & OS Owner’s Manual         INSTRUCTION LABELS    ® The labels shown below were installed on your BILLY GOAT  Power Rake/Overseeder. If any labels are damaged or missing, replace them  before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering  replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.                       LABEL DANGER KEEP HANDS     
                    
                    ملخص المحتوى في الصفحة رقم 8 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 9 
                    
                        PR & OS Owner’s Manual                       OPERATION      Like all mechanical tools, reasonable care must be used when operating machine.  Inspect machine work area and machine before operating.  Make sure that all operators of this   equipment are trained in general machine use and safety.    PUT OIL IN ENGINE BEFORE STARTING   STARTING      ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be  level when checking and filling oil and gaso
                    
                    ملخص المحتوى في الصفحة رقم 10 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 11 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 12 
                    
                        PR & OS Owner’s Manual         ADJUSTING SEED RATE DROPPING SEEDS     - PULL BACK ON THE KNOB THEN   SLIDE THE BRACKET TO DESIRED  STOP SETTING.    EXAMPLE: STOP SETTING IS ON 4   - IF SLICING WITHOUT DROPPING  SEEDS FOR LONG PERIOD THEN    SET THE STOP SETTING TO ZERO.  STOP   SETTING BRACKET KNOB     LAWN PREPARATION      - MOW LAWN TO LOWEST SETTING ON  - AFTER ADJUSTING THE STOP SETTING, LIFT  YOUR M OWER.  UP ON THE BAR TO OPEN THE DROP SEEDER  - DO NOT WATER PRIOR TO SEEDING.    DOOR.  - P
                    
                    ملخص المحتوى في الصفحة رقم 13 
                    
                        PR & OS Owner’s Manual     MAINTENANCE    PERIODIC MAINTENANCE  Periodic maintenance should be performed at the following intervals:  Maintenance Operation Every Use (daily) Every 25 Hours  Inspect for loose, worn or damaged parts.      Check engine oil    Inspect belt    Engine (See Engine Manual)    Grease reel bearings    Inspect and clean engine air filter    Oil height adjustment linkage      FLAIL BLADE WEAR     1. Wait for engine to cool and disconnect spark plug.     2. Close fuel valve 
                    
                    ملخص المحتوى في الصفحة رقم 14 
                    
                        PR & OS Owner’s Manual     STORAGE  Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open  flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.  If engine is to be unused for 30 days or more, prepare as follows:  Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible  malfunction of engine. Drain fuel outdoors, into an 
                    
                    ملخص المحتوى في الصفحة رقم 15 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 16 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 17 
                    
                        PR & OS Owner’s Manual         SLICING REEL ASSY 350113  PARTS DRAWING                  item              PARTS                                   PR500 QTY   no.                LIST                                            Part No.   57 LOCK WASHER 5/16 TWISTED TOOTH 800177 1 71 SCREWCAP 5/16 - 24 x 1" HCS GR. 5 400164 1   80 SHAFT SLICING WA 350142 1 81 BLADE SLICING REEL 350147 20   82 PLATE BLADE MTG. 350148 20 83 SPACER BLADE MTG. 350149 10   84 SPACER BLADE ASSY 350150 9   85 SCREWCAP 1/4
                    
                    ملخص المحتوى في الصفحة رقم 18 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 19 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 20 
                    
                        PR & OS Owner’s Manual     MAINTENANCE RECORD    Date Service Performed                                                                                                                            Part No 350324          Form No F090407A   20