SIIG Network Device EVTEK-5103 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Providing Power for EVTEK-5103: 1) If the main power input is used, connect the MASCOT 8717 plug
2) If the auxiliary power input is used, connect a standard 9 V battery

Choosing EVTEK-5103 Operation Modes:
Switch Position: Mode Terminal
Corresponding Operation Mode:
MSB (* mid (* LSB (* nr. Response:
LO LO LO 0 Receive a file from PC to Board RAM “(enter)RCV:“
LO LO HI 1 Transmit a file from Board RAM to PC “(enter)TMT:“
LO HI LO 2 Copy lowest 32 kB RAM to EEPROM “(enter)R2E:“
L

ملخص المحتوى في الصفحة رقم 2

Overview of the EVTEK-5103 address space: Hex Address: Address Contents: 0000…1FFF External EPROM (contains the operating system of the Board) 2000…27FF Aux /CS (* = 0 for Serial port 1 Aux /CS (* = 1 for Serial port 2 2800…2FFF Aux /CS (* = 0 for Printer Par. Port Aux /CS (* = 1 for Mode Switches 3000…37FF Aux /CS (* = 0 not used Aux /CS (* = 1 for Parallel Ports 1 & 2 3800…3FFF Aux /CS (* = 0 not used Aux /CS (* = 1 for Parallel Port 3 4000…B3FF External RAM: free area to be use