ملخص المحتوى في الصفحة رقم 1
Prestige 661H Series
ADSL 2+ Security Gateway
Prestige 661HW Series
802.11g Wireless ADSL 2+ Gateway
Quick Start Guide
Version 3.40
3/2005
ملخص المحتوى في الصفحة رقم 2
Prestige 661H/HW Series Quick Start Guide Overview The Prestige 661H (P-661H) and Prestige 661HW (P-661HW) are ADSL routers with a built-in switch. The Prestige 661HW also has IEEE 802.11g wireless capability. All wireless features pertain to the P-661HW series only. You may need your Internet access information. See your User’s Guide for background information on all features. This guide is divided into the following sections. 1 Hardware Connections 5 Firewall 2 Configuration for Internet A
ملخص المحتوى في الصفحة رقم 3
Prestige 661H/HW Series Quick Start Guide 1DSL: Connect the Prestige to a telephone jack using a telephone wire. 2LAN: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or Internet access. 3POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source (see the User’s Guide for power adaptors specifications by region). After you’ve made the connections, push in the power button to turn on the Prestige. Look at t
ملخص المحتوى في الصفحة رقم 4
Prestige 661H/HW Series Quick Start Guide 2.1 Configuration Genie From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the installation tutorial or from “Multimedia Auto Provisioner” in the CD. 2.2 Zero Configuration Launch your web browser and navigate to any web site (for example, www.zyxel.com). The Prestige automatically
ملخص المحتوى في الصفحة رقم 5
Prestige 661H/HW Series Quick Start Guide Note: If you do not see the next screen, then please read Section 7.1 on page 12 2 Click Login. 3 Type a new password (retype it to confirm) and click Apply. Otherwise click Ignore. You then see the main web configurator screen 4 In the MAIN MENU screen, click WIZARD SETUP. 2.3.1 Internet Access Setup Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen and then click Next to continue or click Bac
ملخص المحتوى في الصفحة رقم 6
Prestige 661H/HW Series Quick Start Guide 1 From the Mode drop-down list box, select Routing (default) if you want to use routing features such as NAT. 2 The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From the Network Address Translation drop-down list box, select SUA Only if you have one public IP address, Full Feature if you have more than one public IP address (for translation) or None to disable NAT. • PPPoE. • ENET ENCAP Select Connect
ملخص المحتوى في الصفحة رقم 7
Prestige 661H/HW Series Quick Start Guide Note: You will only see the next two screens in Routing mode. • PPPoA • RFC1483 3 Verify your 4 Click Save Settings in the screen shown in step LAN and 3 to go to the final wizard screen.The Prestige WAN automatically tests the connection to the settings. computer(s) connected to the LAN ports. To test the connection from the Prestige to the ISP, click To change the Start Diagnose. Otherwise click Return to Main LAN settings, Menu to go back to t
ملخص المحتوى في الصفحة رقم 8
Prestige 661H/HW Series Quick Start Guide Note: Wireless clients and the Prestige must use the same SSID, channel ID, WEP or WPA-PSK key (if enabled). 1 Click the Wireless LAN link under 2 Click 802.1x/WPA. Advanced Setup. Select Authentication Required, then select WPA- PSK and then type a Pre- shared Key. 3 Click Advanced Setup, Wireless LAN, Wireless. In the ESSID field, enter up to 32 printable characters to uniquely identify the Prestige. If you didn’t configure WPA-PSK, configure W
ملخص المحتوى في الصفحة رقم 9
Prestige 661H/HW Series Quick Start Guide 3.1 OTIST Configure this screen only if you have OTIST-aware wireless clients. OTIST (One-Touch Intelligent Security Technology) allows you to transfer your Prestige’s SSID and WEP or WPA-PSK security settings to wireless clients that support OTIST and are within transmission range. You can also choose to have OTIST generate a WPA-PSK key for you if you didn’t configure one manually. Click Advanced Setup, Wireless LAN and then click OTIST. To change t
ملخص المحتوى في الصفحة رقم 10
Prestige 661H/HW Series Quick Start Guide 4 NAT NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to a different IP address in another. For example, you could translate one public IP address to multiple private IP addresses on your LAN (SUA Only). Click If you have Advanced servers on your Setup and LAN, configure then NAT to an SUA server open the set to have NAT-Mode them visible to screen. the outside. Select SUA From the NAT - O
ملخص المحتوى في الصفحة رقم 11
Prestige 661H/HW Series Quick Start Guide 6 TMSS TMSS (Trend Micro Security Services) scans 2 Download the ActiveX control to view the TMSS computers behind the Prestige for potential web page. The TMSS web page then appears. vulnerabilities such as spyware, missing security Click Service Summary. patches, trojans etc. and then tells you how to update the computer so as to fix the vulnerability. 1TMSS is enabled by default on the Prestige, so you should see the following screen after you
ملخص المحتوى في الصفحة رقم 12
Prestige 661H/HW Series Quick Start Guide 7 Troubleshooting PROBLEM CORRECTIVE ACTION None of the LEDs turn on when Make sure that you have the correct power adaptor connected to the Prestige, it you connect the Prestige’s is plugged into an appropriate power source and the Prestige is turned on. power. Check all cable connections. If the LEDs still do not turn on, you may have a hardware problem. In this case, you should contact your local vendor. Cannot access the Prestige Check the cable c
ملخص المحتوى في الصفحة رقم 13
Prestige 661H/HW Series Quick Start Guide 4 Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click Properties. 5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP). 6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options. 7 Click OK to close the Internet Protocol (TCP/IP) Properties window. 8 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window. 9 Clos
