ملخص المحتوى في الصفحة رقم 1 
                    
                        Guide to Supported Hardware for Cisco 7600 
Series Routers with Cisco IOS Release 12.2SR
This publication lists the supported hardware for Cisco 7600 series routers with Cisco IOS Release 
12.2SR.
Use this publication with the Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series 
Routers.
Contents
This publication contains these sections:
• Document Revision History, page 2
 Supported Hardware, page 3
 Unsupported Hardware, page 66
 Related Documentation, page 68
 Obtaining D
                    
                    ملخص المحتوى في الصفحة رقم 2 
                    
                        Document Revision History Document Revision History Revision Date Change Summary OL-10362-6 May, 2008 Added the following for Cisco IOS release 12.2(33)SRC1:  SPA-4XT-Serial SPA support on SIP-200  Additional DWDM XFP support for ES20 line card, SIP-400,  and SIP-600  OL-10362-5 April, 2008 Added the following for Cisco IOS release 12.2(33)SRB3:  DWDM XFP support on Cisco 7600 ES20 line card and  SIP-600  SFP-GE-T support on Cisco 7600 ES20 line card, SIP-400,  and SIP-600  CWDM SFP support
                    
                    ملخص المحتوى في الصفحة رقم 3 
                    
                        Supported Hardware Revision Date Change Summary OL-10362-2 February, 2007 Added the following for Cisco IOS release 12.2SRB:  RSP 720  Policy Feature Card 3C  Policy Feature Card 3CXL  Distributed Forwarding Card 3CXL  SFP-GE-S, SFP-GE-L, SFP-GE-Z  1-Port and 24-Port Channelized CEoP SPAs  Ethernet Services 20G line cards  Application Control Engine (ACE) Module  Service Application Module for IP  6000 W DC power supply  Cisco 7609-S router chassis OL-10362-1 May, 2006 Initial version
                    
                    ملخص المحتوى في الصفحة رقم 4 
                    
                        Supported Hardware  Enhanced FlexWAN Module Port Adapters, page 49  Service Modules, page 53  Fan Trays, page 58  Power Supplies, page 59  Chassis, page 60 Note  Use the values in the “Power Required” column to determine the exact power requirements for your  configuration to ensure that you are within the power budget.   Daughtercard power is shown separately.  Enter the show power command to display current system power usage. Supervisor Engines  Supervisor Engine 720, page 4  Superv
                    
                    ملخص المحتوى في الصفحة رقم 5 
                    
                        Supported Hardware Supervisor Engine 720 Common Features  Integrated 720-Gbps Switch Fabric  64-MB bootflash device  2 CompactFlash Type II slots (disk0 and disk1) Note Some Supervisor Engine 720 Release 12.2SR images are larger than the bootflash device  and must be stored on a CompactFlash card.  Two Ethernet uplink ports: – 1-MB packet buffer per port – Port 1—Gigabit Ethernet SFP  – Port 2—Configurable as Gigabit Ethernet SFP or 10/100/1000 Mbps RJ-45  QoS port architecture (Rx/Tx): 1p1
                    
                    ملخص المحتوى في الصفحة رقم 6 
                    
                        Supported Hardware Supervisor Engine 720 with PFC3B  Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-SUP720-3B 7.50 A@42 V Supervisor Engine 720 with PFC3B: 12.2(33)SRA  512-MB DRAM  Policy Feature Card 3B (PFC3B); see the  “RSP720-3C-10GE” section on page 10  Multilayer Switch Feature Card 3 (MSFC3): – 512-MB DRAM – 64-MB bootflash Note  There are no memory-only upgrade options for WS-SUP720-3B.  Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720-
                    
                    ملخص المحتوى في الصفحة رقم 7 
                    
                        Supported Hardware  These service modules: – WS-SVC-AON-1-K9—Application-Oriented Networking Module – WS-SVC-AGM-1-K9—Anomaly Guard Module  – WS-SVC-ADM-1-K9—Traffic Anomaly Detector Module  – WS-SVC-MWAM-1—Multi-Processor WAN Application Module   Supervisor Engine 32 does not support these software features and commands: – Protocol independent multicast (PIM) snooping designated-router flooding configurability – NetFlow version 9 – Egress multicast replication – Multicast replication mode det
                    
                    ملخص المحتوى في الصفحة رقم 8 
                    
                        Supported Hardware  QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t RSP720-3C-GE  Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version RSP720-3C-GE 6.66 A@42 V Route Switch Processor 720 with PFC3C: 12.2(33)SRB  Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps  small form pluggable (SFP) module; port 2 is configurable  with either a 1-Gbps SFP module or a 10/100/1000-Mbps  RJ-45  Integrated 720-Gbps switch fabric   PFC3C and MSFC4 with 512
                    
                    ملخص المحتوى في الصفحة رقم 9 
                    
                        Supported Hardware RSP720-3CXL-GE  Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version RSP720-3CXL-GE 7.33 A@42 V Route Switch Processor 720 with PFC3CXL: 12.2(33)SRB  Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps  small form pluggable (SFP) module; port 2 is configurable  with either a 1-Gbps SFP module or a 10/100/1000-Mbps  RJ-45  Integrated 720-Gbps switch fabric  PFC3CXL (high-capacity) and MSFC4 with 512-MB  bootflash, 4-MB NVRAM
                    
                    ملخص المحتوى في الصفحة رقم 10 
                    
                        Supported Hardware RSP720-3C-10GE  Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version RSP720-3C-10GE 7.33 A@42 V Route Switch Processor 720 with uplink ports: 12.2(33)SRC  Two 10 Gigabit Ethernet (10-GE) uplink ports support  10-Gbps X2 modules  Three Gigabit Ethernet (1-GE) uplink ports: two ports support  1-Gbps small form-factor pluggable (SFP) module; one port  supports 10/100/1000-Mbps RJ-45 connector  Integrated 720-Gbps switch fabric   PFC3
                    
                    ملخص المحتوى في الصفحة رقم 11 
                    
                        Supported Hardware RSP720-3CXL-10GE  Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version RSP720-3CXL-10GE 7.33 A@42 V Route Switch Processor 720 with PFC3CXL: 12.2(33)SRC  Two 10 Gigabit Ethernet (10-GE) uplink ports support  10-Gbps X2 modules  Three Gigabit Ethernet (1-GE) uplink ports: two ports support  1-Gbps small form-factor pluggable (SFP) module; one port  supports 10/100/1000-Mbps RJ-45 connector  Integrated 720-Gbps switch fabric   PFC3C
                    
                    ملخص المحتوى في الصفحة رقم 12 
                    
                        Supported Hardware Policy Feature Cards   Policy Feature Card Guidelines and Restrictions, page 12  Policy Feature Card 3BXL, page 13  Policy Feature Card 3B, page 13  Distributed and Centralized Forwarding Cards, page 14 Policy Feature Card Guidelines and Restrictions  The PFC3 supports a theoretical maximum of 64,000 MAC addresses (32,000 MAC addresses  recommended maximum).  You cannot use one type of PFC3 (PFC3BXL or PFC3B) on one supervisor engine and a different  type on the other su
                    
                    ملخص المحتوى في الصفحة رقم 13 
                    
                        Supported Hardware Policy Feature Card 3BXL Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-F6K-PFC3BXL 2.57 A@42 V Policy Feature Card 3BXL (PFC3BXL) Supported only with Supervisor Engine 720 12.2(33)SRA Note  There are no memory upgrade options for WS-F6K-PFC3BXL.  Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720 or WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL=  includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3. Refer to thi
                    
                    ملخص المحتوى في الصفحة رقم 14 
                    
                        Supported Hardware Policy Feature Card 3CXL Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-F6K-PFC3CXL 2.57 A@42 V Policy Feature Card 3CXL (PFC3CXL) Supported only with RSP 720 12.2(33)SRB Note  There are no memory upgrade options for WS-F6K-PFC3BXL. Distributed and Centralized Forwarding Cards  Centralized Forwarding Card (WS-X6700-CFC), page 14  Distributed Forwarding Card 3BXL, page 15  Distributed Forwarding Card 3B, page 16  Distribu
                    
                    ملخص المحتوى في الصفحة رقم 15 
                    
                        Supported Hardware Distributed Forwarding Card 3BXL  WS-F6700-DFC3BXL, page 15  WS-F6K-DFC3BXL, page 15 WS-F6700-DFC3BXL Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-F6700-DFC3BXL 3.30 A@42 V Distributed Forwarding Card 3BXL (DFC3BXL) for use on CEF720 modules  Supported only with Supervisor Engine 720 12.2(33)SRA Note  WS-F6700-DFC3BXL uses memory that is installed on the switching module.  Refer to this publication for information about
                    
                    ملخص المحتوى في الصفحة رقم 16 
                    
                        Supported Hardware Distributed Forwarding Card 3B  WS-F6700-DFC3B, page 16  WS-F6K-DFC3B, page 16 WS-F6700-DFC3B Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-F6700-DFC3B 3.00 A@42 V Distributed Forwarding Card 3B (DFC3B) for use on CEF720 modules  Supported only with Supervisor Engine 720 12.2(33)SRA Note  WS-F6700-DFC3B uses memory that is installed on the switching module.  Refer to this publication for information about WS-F6700-DFC3B 
                    
                    ملخص المحتوى في الصفحة رقم 17 
                    
                        Supported Hardware Distributed Forwarding Card 3CXL Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-F6700-DFC3CXL 2.35 A@42 V Distributed Forwarding Card 3CXL (DFC3CXL) for use on CEF720 modules  Supported with Supervisor Engine 720 and Route 12.2(33)SRB Switch Processor 720 Distributed Forwarding Card 3C Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-F6700-DFC3C 1.65 A@42 V Distributed Forward
                    
                    ملخص المحتوى في الصفحة رقم 18 
                    
                        Supported Hardware 10-Gigabit Ethernet Switching Modules Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-X6704-10GE 6.28 A@42 V 4-port 10-Gigabit Ethernet XENPAK  CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)  dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)  dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)  Supports egress multicast replication  QoS port architecture (Rx/Tx): – With DFC3: 8q8t/1p7q8t  – With CFC: 1q8t/1p7q8t   Number of ports
                    
                    ملخص المحتوى في الصفحة رقم 19 
                    
                        Supported Hardware Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version WS-X6502-10GE 3.30 A@42 V 1-port 10-Gigabit Ethernet    With Supervisor Engine 720: – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)  QoS port architecture (Rx/Tx): 1p1q8t/1p2q1t  Number of ports: 1 Number of port groups: 1 Port ranges per port group: 1 port in 1 group With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32 
                    
                    ملخص المحتوى في الصفحة رقم 20 
                    
                        Supported Hardware Product ID Power Minimum  (append “=” for spares) Required Product Description Software Version X2-10GB-LR 12.2(33)SRC Note  To configure WS-X6708-10GE port oversubscription, refer to the hw-module oversubscription command in the  command reference at this URL: http://www.cisco.com/en/US/products/ps6922/prod_command_reference_list.html  Installation of a WS-X6708-10GE switching module in a chassis other than the following prevents operation at levels  that are fully NEBS-com