InFocus SP-CEIL-003 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

NOTE: If the (Optional) SP-LTMT-EXT Adjustable height
SP-CEIL-003
suspension adapter is a part of the installation, securely install

the ceiling adapter to the ceiling at this time.
Projector Mount


INSTALLATION INSTRUCTIONS
q Step 3
(Refer to its Installation Instructions)
Install the two (2) conical spacers (J) and two (2) flat washers (K) two

(2) hinge pin screws (L) loosely on both sides of the base box (H).
q Step 1
Raise the projector with the mounting bracket at

ملخص المحتوى في الصفحة رقم 2

q Step 5 Install the two (2) conical spacers (J) and two (2) flat washers (K) two (2) hinge pin screws (L) loosely on both sides of the base box (H). Raise the projector with the mounting bracket attached and slip though the hinge pin slots openings on the bracket into the base box. Install the two (2) angle locking screws (I) adjust the angle, lock it, and then tighten the hinge pin screws (L). The ceiling should be capable of supporting a weight of See Figure 3