ملخص المحتوى في الصفحة رقم 5
Runco CL-700 Video Projector User’s Manual Thank you for your purchase of this quality Runco video projector! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation. WARNING This symbol is intended to alert the user to the presence of CAUTION uninsulated " dangerous voltage " within the product's RISK OF ELECTRIC SHOCK enclosure that ma
ملخص المحتوى في الصفحة رقم 6
ملخص المحتوى في الصفحة رقم 7
User’s Manual 1. Overview Features True 16x9 High Definition DMD for 16x9 screens. High Contrast and Picture Quality TM This single-DMD DLP projector provides excellent contrast ratio, color uniformity and seamlesss picture quality. Fantastic Dynamic Performance and Rich Gray-scale With a 6-segment color wheel, the picture's refresh rate can attain speeds of up to 240 Hz. By doing this, this unit provides fantastic dynamic performance and rich gray-scale without the 'color-flicker' or 'rainbow
ملخص المحتوى في الصفحة رقم 8
Location Front / Upper Side 9 4 8 7 6 5 4 1 2 3 4 1. Front Lamp Cover 6. Power LED and Lamp LED Remove this cover when replacing the lamp. Show the status of power and lamp. For more details, see "Control Panel" on page 5. 2. Projection Lens 7. Top IR Sensor 3. Front IR Sensor 8. Power ON Indicator 4. Ventilation Holes (exhaust) 9. Cord Cover 5. Focus Ring and Zoom Ring Adjusts the focus and zoom of image. Rear / Bottom Side 4 3 2 1 4 8 5 7 6 1. Connector Panel 5
ملخص المحتوى في الصفحة رقم 9
Controls and Functions ❚ Control Panel 4 3 Power Lamp Power Lamp 12 1. POWER LED Indicate the status of the power ■ Orange when the AC power cord is plugged into the wall outlet (standby mode). Once in the standby mode, you can turn on the projector by pressing ON key on the remote control for ONE second. ■ Green when the power is turned on (operational mode). ■ Flashing Orange for the first 30 seconds after power-up indicating that the lamp is warming up. ■ Flashing Green for one minute afte
ملخص المحتوى في الصفحة رقم 10
❚ Connector Panel 213 6 7 S-Video RS-232C 12V Trigger Video Y CBR C Computer G/Y B/PBR R/P H V 54 1. Video (RCA Jack) Composite video signal input. 2. S-Video (mini DIN 4-pin) Y/C (S-video) signal input 3. Component (RCA Jacks) 480i Component (Y/CB/CR) video signal input 4. RGB/ HDTV (BNC) or Progressive Scan DVD players DTV Y/PB/PR or DTV RGB video signal input. 5. Computer (D-Sub 15-pin) RGB Computer signal input. 6. RS-232C (RJ-11 Jack) RS-232C control signal input. 7. 12v Trigger (mini jack
ملخص المحتوى في الصفحة رقم 11
Remote Control ON VIDEO Hold down this button for Composite video signal input ONE second to turn on the unit. S-VIDEO S-Video signal input OFF Press this button to turn off COMPONENT the unit. Component Y/CB/CR input COMPONENT HD DTV Y/PB/PR signal input ANAMORPHIC For 16:9 DVDs. RGB HD DTV RGBHV signal input 4X3 The input signal will be scaled PC to fit 4:3 display mode in the Computer signal input center of screen. LETTERBOX Letterbox mode. Image is letterbox CUSTOM format is enlarged to fit
ملخص المحتوى في الصفحة رقم 12
2. Installation Remote Control Push and slide to open the cover. Install the two AAA batteries with the correct polarity, then close the cover. Notes on Batteries ■ Make sure that the battery polarities are correct when installing the batteries. ■ Do not mix an old battery with a new one or different types of batteries. ■ If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage. Notes on Remote Control Operation ■ Make sure that the
ملخص المحتوى في الصفحة رقم 13
❚ Adjust the Lens Zoom/Focus ring Adjust the projected image size you need with the zoom ring on the lens. To focus the image, rotate the focus ring on the lens. Focus Focus Zoom Zoom in Zoom Zoom ou outt in ❚ Adjust the height There are 4 screw adjusters on the bottom of this unit. You can adjust the height or projection angle of this unit by using these adjusters. 2. Installation 9
ملخص المحتوى في الصفحة رقم 14
Installation with Standard Lens Ceiling Between 6.10 - 27.36 in. (155 - 695mm) B Projector Base 2.78 in. (70.64 mm) Base plate to center of lens 4.6 in. (117.7 mm) C A angle 5.51 in. (140 mm) Lens to center of bracket Screen Top Half Screen Length Screen Center Screen __________ (H) x __________ (W) Full Screen Length B) THROW DISTANCE: CL-700 16 x 9 Screens (Standard Throw Lens): Minimum: (screen width x 2.00) = __________ inches Maximum: (screen width x 2.40) = __________ inches C) VERTI
ملخص المحتوى في الصفحة رقم 15
Installation with Short Lens Option Ceiling Between 6.10 - 27.36 in. (155 - 695mm) B Projector Base 2.78 in. (70.64 mm) Base plate to center of lens 4.6 in. (117.7 mm) C angle 5.51 in. (140 mm) Lens to center of bracket A Screen Top Half Screen Length Screen Center Screen __________ (H) x __________ (W) Full Screen Length B) THROW DISTANCE: CL-700 16 x 9 Screens (Short Throw Lens Option): Minimum: (screen width x 1.33) = __________ inches Maximum: (screen width x 1.60) = __________ inches
ملخص المحتوى في الصفحة رقم 16
s C Throw Di CL-700 @ 1280 x 720 with Standard Lens Screen Height Screen Width Min Throw Distance Max Throw Distance Vertical Offset Position 40.5 72 144.18 173.02 2" Vertical Offset 43 77 153.08 183.70 2" Vertical Offset 45 80 160.20 192.24 2" Vertical Offset 47 84 167.32 200.78 2" Vertical Offset 49 87 174.44 209.33 2" Vertical Offset 50 89 178.00 213.60 2" Vertical Offset 51.5 92 183.34 220.01 2" Vertical Offset 52 93 185.12 222.14 2" Vertical Offset 54 96 192.24 230.69 2" Vertical Offset 56
ملخص المحتوى في الصفحة رقم 17
3. Connecting When connecting, make sure to: 1. Turn off all equipment before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly connected. 4. Connect all audio signals to external speakers. This projector is not equipped with speakers. Connecting Video Inputs Video / S-Video / Component (Interlaced Video) 12 3. Connecting
ملخص المحتوى في الصفحة رقم 18
❚ Progressive Component (DTV Y/PB/PR) S-Video RS-232C 12V Trigger Video YCC BR Computer G/Y B/PBR R/P H V DTV Source ❚ RGBHV (DTV RGB) S-Video RS-232C 12V Video Trigger YCC BR Computer G/Y B/PBR R/P H V DTV Source The RGB BNC input supports two kinds of HDTV formats: Progressive component (DTV Y/PB/PR) and DTV RGB. The unit will auto detect the resolution automatically. 3. Connecting 13
ملخص المحتوى في الصفحة رقم 19
Connecting a Computer S-Video RS-232C 12V Trigger Video Y CBR C Computer G/Y B/PBR R/P H V PC or Notebook This unit only supports resolutions up to XGA. If the input signal is greater than XGA, the projector will display a warning message. 14 3. Connecting
ملخص المحتوى في الصفحة رقم 20
4. Basic Operation Turning on the Power ■ The Power LED lights orange when power is applied and the power switch is turned on. ■ Press and hold the ON key on the remote control for ONE second to turn on the unit. The POWER LED will blink orange during warm up period, then OFF ON light solid green. ■ " Searching…." will be displayed on the screen before the projector identifies the input signal. This message will remain on the screen until a valid signal is detected. VIDEO S-VIDEO
ملخص المحتوى في الصفحة رقم 1
www.htrgroup.com
OWNER’S OPERATING MANUAL
CL-700
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Limited Warranty Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’s Finest Home Theater Products”. With proper installation, setup and care, you should enjoy many years of unparalleled video performance. Please read this consumer protection plan carefully and retain it with your other important documents. This is a LIMITED WARRANTY as defined by the U.S. Consumer Product Warranty and Federal Trade Commission Improvem
ملخص المحتوى في الصفحة رقم 4
EFFECTIVE WARRANTY DATE: This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as evidence of the purchase date. IMPORTANT: WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified. TO OBTAIN SERVICE, CONTACT YOUR RUNCO DEALER: Repairs made under the terms
