AudioSource 6.5" 2-Way In-Celing Speakers دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

AS6c
6.5” 2-Way In-Ceiling Speakers
Congratulations on your purchase of the Audiource
AS6c In-Ceiling Speaker System. This product is
designed to reproduce the audio portion of your
home entertainment environment with accuracy and
detail that will satisfy the most discriminating
listener.
Please read this Installation Manual to ensure the
proper installation and performance of your AS6c
speakers.
Preparing for your Installation
Gather the necessary tools for your installation.
AS6c
You w

ملخص المحتوى في الصفحة رقم 2

the uninsulated ceiling. After selection of the mounting location, mark the hole to be cut out. A template is provided in the speaker box. It is now time to connect the speaker wire to the AS6c. Locate and align the template, then mark with pencil on Your speaker wire is usually coded to identify each the ceiling surface. If you are unsure whether there are conductor as either positive or negative. This can be by obstructions behind the ceiling surface where the color coding, or one condu

ملخص المحتوى في الصفحة رقم 3

Tighten all four of the mounting screws in the same Recommended Speaker Wire Gauges manner until the speaker is properly aligned and held Caution: Do not over thighten! tight to the wall surface. The resistance of the speaker wire in your installation can cause your speakers to perform at less than their optimum quality level. Excess resistance caused by Painting the Speaker using an undersized speaker wire can result in loss of detail and definition in the bass region of your audio Two

ملخص المحتوى في الصفحة رقم 4

AS6c Specifications Woofer 6.5” Poly Cone with Butyl Rubber Surround Tweeter Pivoting 25mm Ferro-Fluid Cooled Tweeter Frequency Response 50Hz to 20kHz Impedance 8 ohm Sensitivity 88dB Power Capacity 100 Watts Peak Outer Dimension 9” (228.6mm) diameter Cut Out Dimension 7.75” (197mm) diameter Mounting Depth 2.9” (73mm) Two Year Limited Warranty AudioSource a division of Rodin warrants this product against defects in materials and workmanship for a limited period of time. For a period of two (2)