ملخص المحتوى في الصفحة رقم 1 
                    
                        MOSFET POWER AMPLIFIERS
Installation Instructions / Owner's Manual
BA400   BA440                                                                                                                                                                                                                                                                                                                                                                                                                                    
                    
                    ملخص المحتوى في الصفحة رقم 2 
                    
                        INTRODUCTION Congratulations  on  your  purchase of a Baja state-of-the-art power amplifier.  Your selection  of a Baja car audio product indicates a true appreciation of fine musical reproduction.  Whether   adding  to an existing system or including your  Baja  amplifier in  a  new system,  you  are certain  to  notice  immediate  performance  benefits.  KEEP YOUR SALES RECEIPT Take this time to attach your sales receipt to the manual and put in a safe place.  In case of any  unforeseen reason
                    
                    ملخص المحتوى في الصفحة رقم 3 
                    
                        SAFETY PRECAUTIONS Fuse amplifier's  power wire at the battery.   Be sure to fuse the power wire within 12" of the car's battery.  This will protect the car's  battery in case of a short circuit between the power amplifier and battery.  THIS IS A MUST,  the  amplifier's  built-in  fuse  will  only  protect  the  power  amplifier  not  the car's  battery! Use high grade wire connectors. To ensure maximum power transfer and secure safe connections, it is recommended to use high  grade  barrier  sp
                    
                    ملخص المحتوى في الصفحة رقم 4 
                    
                        FEATURES AND BENEFITS DC Offset Protection This circuit protects the output of the amplifier against DC voltage.  If for some reason DC  voltage is detected at the output stage, the amplifier will shut down protecting the speakers  from direct current.  Short Circuit Protection The circuit protects the amplifier from damage due to a short found in the speakers or wiring.  If one of the speakers or its wiring comes in contact with ground, the amplifier will shut down.   To resume normal operation
                    
                    ملخص المحتوى في الصفحة رقم 5 
                    
                        Bass Boost For added low frequency performance the amplifiers are equipped with a variable 0~12 dB  bass boost @ 45Hz. (BA 400 only) Power Fusing This  protects  the  amplifier against  short circuits  and  excessive  current. Remote Turn-on Automatically turns amplifier on when connected to the head unit's remote output.  The  amplifier will turn on and off with the head unit to save current consumption.  This control also  operates the reset circuit for the amplifier's protection.  It must be 
                    
                    ملخص المحتوى في الصفحة رقم 6 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 7 
                    
                        POWER CONNECTIONS I IN N- -L LI IN NE E P PO OW WE ER R F FU US SE E M MO OU UN NT TE ED D W WI IT TH HI IN N 1 12 2" " F FR RO OM M B BA AT TT TE ER RY Y R RE EC CO OM MM ME EN ND DE ED D R RA AD DI IO O' 'S S R RE EM MO OT TE E ( (S SA AM ME E R RA AT TI IN NG G A AS S O ON N T TH HE E A AM MP P) ) T TU UR RN N- -O ON N O OU UT TP PU UT T ( (N NO OT T P PR RO OV VI ID DE ED D) ) - - + + 9 94 4..7 7 C CA AR R  B BA AT TT TE ER RY Y + +1 12 2V V IMPORTANT!  Before making any connections, disconn
                    
                    ملخص المحتوى في الصفحة رقم 8 
                    
                        SIGNAL CONNECTIONS Connect the RCA output of the head unit (AM/FM cassette player, CD, or DAT) to the RCA input terminals of the amplifier.    To make these connections, we recommend high quality RCA cables, which are available at your  local car audio retailer. Run signal wires away from electrical wires to avoid possibility of  induced noise from the car's electrical system (i.e. popping noises or engine noise).  Please note  that when making these connections the signal inputs correspond with
                    
                    ملخص المحتوى في الصفحة رقم 9 
                    
                        HIGH LEVEL CONNECTIONS (OPTIONAL) High Level inputs have been included to connect the amplifier to a radio without low-level  outputs (i.e. factory radio).  This connection will allow you to connect directly to the speaker  output of the radio with out the need of an external adapter. Determine the type of radio you have and make one of the following connections. CAUTION!  Before making any connections determine the type of radio to avoid possible  damage to amplifier and/or radio. 8            
                    
                    ملخص المحتوى في الصفحة رقم 10 
                    
                        FOUR CHANNEL CONNECTIONS:  FLOATING GROUND RADIO (MOST COMMON TYPE) 9                                                                                                                                                                                                                                                                                                                                                                                                                                               
                    
                    ملخص المحتوى في الصفحة رقم 11 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 12 
                    
                        SPEAKER CONNECTIONS (BRIDGED) The Baja amplifiers are capable of being bridged in a mono configuration. This feature allows  you the flexibility of using the amplifier to drive a ** subwoofer or a center channel.  In this  configuration the amplifier sums the right and left channel to deliver one channel (mono)  output. Please note: in order for the amplifier to sum right and left signal information, both right and  left  RCA  connections  must  be  made. **CAUTION!  In the bridged mode, the amp
                    
                    ملخص المحتوى في الصفحة رقم 13 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 14 
                    
                        
                    
                    ملخص المحتوى في الصفحة رقم 15 
                    
                        TROUBLE SHOOTING THE SYSTEM We have put together this trouble-shooting guide if you experience problems after installing  the amplifier. Please keep in mind that the majority of problems incurred are caused by  improper installation and not the equipment itself.  In addition, there are many components in  the system that could cause various signal problems such as inducted electrical noise and  engine noise.  Before you can properly address the problem, you must first find the component that is 
                    
                    ملخص المحتوى في الصفحة رقم 16 
                    
                        SPECIFICATIONS BA400                      BA440 Output Power @ 4 Ohm 2 x 200W                                          4 x 100W RMS Power @ 4 Ohm 2 x 100W                                          4 x 50W RMS Power @ 2 Ohm 2 x 150W                                         4 x 75W Bridged RMS @ 4 Ohm 1 x 300W                                         2  x 150W THD @ RMS Power < 0.1%                                         < 0.1% Frequency Response 10Hz ~ 35Khz                                     10Hz
                    
                    ملخص المحتوى في الصفحة رقم 17 
                    
                                                           LIMITED WARRANTY Profile Consumer Electronics, Inc. warrants this product to be free from defects in  material and workmanship for a period of One (1) Year from the date of sale to the  original consumer purchaser.  If this product is proven to be defective within this one  year period, Profile will repair it when said product is returned, with a copy of the  dated sales receipt, freight prepaid to Profile.     This warranty is valid only in the United States. 
                    
                    ملخص المحتوى في الصفحة رقم 18 
                    
                                                                            WARRANTY REPAIR  POLICY   In the unlikely event of product failure, the following procedures  should be followed   1) The unit must be under the 1-year warranty period. 2) The unit must have no physical damage. 3) A copy of the original proof of purchase must be sent with the unit. 4) Include a brief description of the problem or failure with the unit. 5) Include the return street address and daytime telephone number. 6) Allow 2~3 weeks for rep
                    
                    ملخص المحتوى في الصفحة رقم 19 
                    
                        By PROFILE CONSUMER ELECTRONICS, INC. 15060 SHOEMAKER AVE SANTA FE SPRINGS, CA 90670 TEL: 562-404-9393       FAX:  562-404-9433 WWW.PROFILEUSA.COM