ملخص المحتوى في الصفحة رقم 1 
                    
                        Integrated Refrigeration Design Guide                                                                                                                                                                                                                                                                                                                                                                                                                                                                               
                    
                    ملخص المحتوى في الصفحة رقم 2 
                    
                        Contents 3 Integrated Refrigeration Features and specifications are subject to change at any  time without notice. Visit subzero.com/specs for the most  4 Specifications up-to-date information. 8 Custom Panels IMPORTANT NOTE: Throughout this guide, dimensions may  1 11 Full-Scale Template vary by ± /8" (3). Dimensions in parentheses are millimeters  unless otherwise specified. Models IC-18F and IC-30R.                                                                                               
                    
                    ملخص المحتوى في الصفحة رقم 3 
                    
                        INTEGRATED REFRIGERATION Integrated Refrigeration With custom front panels and hardware, Sub-Zero invented KEY FEATURES integrated columns, tall and drawer models that disappear   • Custom front panels and hardware allow for infinite  into the decor. Integrated units fit flush with other cabinets,  design options. making integrated refrigeration as practical and beautiful in   • Point-of-use refrigeration that can be placed anywhere in  the master suite, bar or theatre room as in the kitchen. th
                    
                    ملخص المحتوى في الصفحة رقم 4 
                    
                        INTEGRATED REFRIGERATION Specifications Overall Dimensions COLUMN INTERIOR CAPACITY COLUMN R CU FT (L) F CU FT (L) W 24" (610) IC-18FI 8.4 (238) IC-24R 12.9 (365) 1 4 /2" (114) IC-24FI 12.3 (348) IC-30R(ID) 17.3 (490) IC-30FI 15.3 (433) IC-36R(ID) 21.4 (606) TALL R CU FT (L) F CU FT (L) 1 84"* 69 /2" IT-30R(ID) 16.5 (467) (2134) (1765) IT-30FI 15.1 (428) IT-30CI(ID) 10.6 (300) 5.0 (142) IT-36R(ID) 20.5 (580) IT-36CI(ID) 13.3 (377) 6.4 (181) DRAWER R CU FT (L) F CU FT (L) ID-24R 4.0 (113) ID-24F(
                    
                    ملخص المحتوى في الصفحة رقم 5 
                    
                        INTEGRATED REFRIGERATION Overall Dimensions TALL DRAWER W 24" (610) W 24" (610) 1 /4" (6) 1 4 /2" (114) 5 13 /16" (338) 3 /8" (10) 1 34 /2"* 9 10 /16" (876) (268) 7 84"* 44 /8" (2134) (1140) 5 3 /8" (92) *34" (864) MIN TO 35" (889) MAX 3 /8" (10) 5 13 /16" (338) 3 /8" (10) 9 10 /16" (268) 3 17 /4" (451) 5 3 /8" (92) 1 1 *83 /2" (2121) MIN TO 84 /2" (2146) MAX DRAWER A MODEL W 3 1 /4" (45) ID-24R, ID-24F(I) 24" (610) ID-27R 27" (686) ID-30R(P), ID-30F(I), ID-30C(I) 30" (762) ID-36R(P), ID-36C(I) 
                    
                    ملخص المحتوى في الصفحة رقم 6 
                    
                        INTEGRATED REFRIGERATION Opening Dimensions INTEGRATED MODELS OPENING DIMENSIONS COLUMN W H IC-18FI 18" (457) 84" (2134) 25" (635) OPENING IC-24R, IC-24FI 24" (610) 84" (2134) DEPTH IC-30R(ID), IC-30FI 30" (762) 84" (2134) IC-36R(ID) 36" (914) 84" (2134) TALL W H TOP VIEW IT-30R(ID), IT-30FI, IT-30CI(ID) 30" (762) 84" (2134) IT-36R(ID), IT-36CI(ID) 36" (914) 84" (2134) DRAWER W H 1 ID-24R, ID-24F(I) 24" (610) 34 /2" (876) 1 ID-27R 27" (686) 34 /2" (876) 1 ID-30R(P), ID-30F(I), ID-30C(I) 30" (762
                    
                    ملخص المحتوى في الصفحة رقم 7 
                    
                        INTEGRATED REFRIGERATION Electrical Plumbing The electrical supply must be located within the shaded The water supply line should be located within the shaded  area shown in the illustration and chart below. A separate area shown in the illustration below. The water supply line  circuit, servicing only this appliance is required. A ground should be connected to the house supply with an easily  fault circuit interrupter (GFCI) is not recommended and may accessible shut-off valve. Do not use self-
                    
                    ملخص المحتوى في الصفحة رقم 8 
                    
                        INTEGRATED REFRIGERATION Custom Panels For integrated models, custom door panels and handle TYPICAL PANEL DIMENSIONS hardware must be provided. Refer to the panel requirements   chart and typical panel dimensions. The thickness of the custom panel can vary. A minimum  5 /8" (16) thick panel is required, but the thickness can be  7 3 79 /8" 49 /8" increased provided it does not exceed the weight limit. The  (2029) (1254) depth of each integrated model is 24" (610). Allow for panel  thickness when
                    
                    ملخص المحتوى في الصفحة رقم 9 
                    
                        INTEGRATED REFRIGERATION Custom Panels DOOR PANEL HEIGHT TOE KICK CLEARANCE The height of the custom door panel can extend beyond the The height of the toe kick area can extend beyond the  typical panel height, provided it does not exceed the weight typical toe kick height, provided it does not exceed the  limit. Refer to the illustration below. dimensions in the illustration below. 3 1 /4" (45) A DECORATIVE VALANCE CANNOT EXTEND 1 BEYOND THIS PLANE /8" (3) HINGE VENTED LOUVERS 24" (610) TO BACK
                    
                    ملخص المحتوى في الصفحة رقم 10 
                    
                        INTEGRATED REFRIGERATION Handle Hardware Optional stainless steel tubular and pro handles are avail- able through an authorized Sub-Zero dealer. For local dealer  information, visit the find a showroom section of our  website, subzero.com. Refer to the chart below for the length and stud spacing of  standard handles for integrated models. STANDARD HANDLES COLUMN LENGTH STUD SPACING 1 1 Tubular 50 /8" (1273) 47 /8" (1197) 3 1 Pro 48 /8" (1229) 47 /8" (1197) TALL (DOOR) / 36" DRAWER LENGTH STUD SP
                    
                    ملخص المحتوى في الصفحة رقم 11 
                    
                        INTEGRATED REFRIGERATION Maximum Door Opening FULL-SCALE TEMPLATE As the panel width and/or depth increases, so does the  potential for panel interference. Interference may be  minimized by utilizing the 90° door stop. 3 /4" (19) PANEL DOOR OPEN MAXIMUM 105° 1 /8" (3) REVEAL POTENTIAL DOOR CLOSED 3 INTERFERENCE /4" (19) PANEL ADJACENT CABINETRY POTENTIAL INTERFERENCE 0" 1" (25) SCALE   Maximum door opening (top view). subzero.com/specs   |   11                                                    
                    
                    ملخص المحتوى في الصفحة رقم 12 
                    
                        Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and  labor to repair or replace, under normal residential use, any part of the product that proves to be defec- tive in materials or workmanship. All service provided by Sub-Zero under the above warranty must be  performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service w
                    
                    ملخص المحتوى في الصفحة رقم 13 
                    
                        Sub-Zero, Sub-Zero & Design, Dual Refrigeration, Constant Care, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trade- marks and service marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf  Appliance, Inc. (collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in t
                    
                    ملخص المحتوى في الصفحة رقم 14 
                    
                        SUB-ZERO, INC.    P.O. BOX 44848    MADISON, WI 53744    SUBZERO.COM    800.222.7820 SZINIP2DG 9/2013