Addonics Technologies ADSACF-N دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

User Guide
SATA - CF Adapter
T E C H N O L O G I E S
(ADSACFB / ADSACFW /
ADSACF-N / ADSACF-7M)
PCI Slot Mount
Eject Button
SATA
Connector
Bay Mount
Power
Connector
v7.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/

ملخص المحتوى في الصفحة رقم 2

Hardware Installation: Step 1: Connect Y-type power cable to the power connector on the adapter. This will provide power to the adapter and the CF card. Step 2: Connect a SATA cable to the SATA connector on the adapter and the other end to the SATA controller port. Step 3: Start the Computer. Note: If you insert the CF card while your system is ON and it does not get detected, probably your SATA host controller does not support hot swap. CONTACT US www.addonics.com Phone: 408-573-8580 F