ملخص المحتوى في الصفحة رقم 1
Installation & User Guide
SK01 EXTERNAL 2.5” DRIVE STORAGE KIT
www.crucial.com
ملخص المحتوى في الصفحة رقم 2
For additional information on product, warranty or return information visit www.crucial.com/support Pour obtenir de plus amples renseignements sur la garantie ou le retour de produit, veuillez visiter le site www.crucial.com/support Zusätzliche Informationen zur Produktgarantie oder zum Zurücksenden finden Sie unter www.crucial.com/support Gå til www.crucial.com/support for ytterligere informasjon om produktgaranti eller -retur Per ulteriori informazioni sulla garanzia del prodotto o sulla
ملخص المحتوى في الصفحة رقم 3
Table of Contents Package contents ....................................................................... 2 Minimum system requirements ............................................. 2 Installation steps • To insert the SSD into the 2.5-inch external enclosure ...................................................3-4 • To use the 2.5-inch external enclosure as a standalone device ............................................ 5 • To use the 2.5-inch external enclosure in the 3.5-inch desk
ملخص المحتوى في الصفحة رقم 4
Package contents • 2.5-inch USB 2.0 external enclosure • 3.5-inch hot-swappable SATA drive bay • 5.25-inch bracket • USB cable • Internal SATA cable • Internal power cable adapter • Screw packets: – 7 large screws for mounting 3.5-inch drive bay and 5.25-inch bracket, plus 1 spare – 4 small screws for attaching the SSD to the PCB, plus 1 spare • Protective carrying case • User guide NOTE: The Crucial SK01 storage kit does NOT contain an SSD;
ملخص المحتوى في الصفحة رقم 5
Installation steps The SK01 external 2.5-inch storage kit is designed to house an internal 2.5-inch SSD for use in three different ways: • Connection as an external USB 2.0 device for desktops or notebooks • Connection via a SATA 3Gb/s port by way of installation into a 3.5-inch desktop drive bay • Connection via a SATA 3Gb/s port by way of installation into a 5.25-inch desktop drive bay NOTES: • No USB or SA TA driver installation is required for Windows 2000 or above or for
ملخص المحتوى في الصفحة رقم 6
2. Align the SATA connector on the rear of the SSD with the SATA connector on the rear of the PCB (Pic A), and then slide the SSD connector onto the PCB connector (Pic B). A B 3. Hold the PCB and SSD together and flip them upside down. On the bottom of the PCB, use the smaller screws to attach the SSD to the PCB, and then flip the assembled PCB/SSD unit upright. 4. Align the assembled PCB/SSD unit with the r
ملخص المحتوى في الصفحة رقم 7
To use the 2.5-inch external enclosure as a standalone device If you are installing the SSD internally into a desktop computer, skip this section and proceed to either “To use the 2.5-inch SSD external enclosure in the 3.5-inch desktop drive bay” or “To use the 2.5-inch SSD external enclosure in the 5.25-inch desktop drive bay.” If you are using the SSD as a standalone external device for a desktop or notebook computer, use the following instructions. 1. Start the system. 2. Using the USB
ملخص المحتوى في الصفحة رقم 8
2. On the rear of the 3.5-inch drive bay, plug in the power cable adapter and the SATA cable. 3. Insert the 3.5-inch drive bay into the 3.5-inch bay of a desktop computer. 4. Adjust the drive bay so that it is level in the case. Use the larger screws to secure it on both sides. 6
ملخص المحتوى في الصفحة رقم 9
5. Connect the drive bay power cable to the power cable inside the case (Pic A). Connect the drive bay SATA cable to the SATA slot on the motherboard (Pic B). A B 6. Insert the 2.5-inch external enclosure (Pic A) into the 3.5-inch drive bay until they are firmly connected. The eject button on the 3.5-inch drive bay will pop out when the 2.5-inch external enclosure is fully inserted (Pic B). A
ملخص المحتوى في الصفحة رقم 10
To use the 2.5-inch external enclosure in the 5.25-inch desktop drive bay Use the 3.5-inch drive bay and 5.25-inch bracket provided in this kit to install the 2.5-inch external enclosure into the 5.25-inch bay (CD-ROM/DVD drive bay) of a desktop computer. 1. Turn the computer power off, and then open the computer case. 2. Place the 3.5-inch drive bay into the 5.25-inch bracket (Pic A), aligning the screw holes in the drive bay with the openings in the bracket (Pic B). A
ملخص المحتوى في الصفحة رقم 11
4. On the rear of the 3.5-inch drive bay, plug in the power cable adapter and the SATA cable. 5. Insert the assembled 3.5-inch drive bay/5.25-inch bracket unit into the 5.25-inch bay of the desktop tower. 6. Adjust the assembled 3.5-inch drive bay/5.25-inch bracket unit so that it is level in the case. Use the larger screws to secure the unit on both sides. 9
ملخص المحتوى في الصفحة رقم 12
7. Connect the drive bay power cable adapter to the power cable inside the case (Pic A). Connect the drive bay SATA cable to the SATA slot on the motherboard (Pic B). A B 8. Insert the 2.5-inch external enclosure (Pic A) into the 3.5-inch drive bay within the 5.25-inch bracket until they are firmly connected. The eject button on the 3.5-inch drive bay will pop out when the 2.5-inch external enclosure is fully inserted
ملخص المحتوى في الصفحة رقم 13
Removal steps To remove a 2.5-inch external enclosure from a 3.5-inch or 5.25-inch drive bay 1. If your system does not support hot-sw apping, turn off the computer power before removing the drive. (Check with your motherboard or system manufacturer for more information.) 2. Press the eject button on the 3.5-inch drive bay to pop out the 2.5-inch external enclosure. 3. Pull the 2.5-inch external enclosure out of the 3.5-inch drive bay. 11
ملخص المحتوى في الصفحة رقم 14
To remove the standalone 2.5-inch external enclosure from the USB port in Windows 2000 or above 1. In the bottom-right section of the Taskbar, right-click the remove hardware icon ( ), and then select Safely remove USB Mass storage Device. Safely remove USB Mass Storage Device 2. When the Safe to Remove Hardware message appears, and the remove hardware Safe To Remove Hardware icon disappears from the task bar, detach The “USB Mass Storage Device” device can
ملخص المحتوى في الصفحة رقم 15
Partitioning and formatting steps CAUTION! New storage drives (such as an SSD) need to be formatted before use. You might also need to reformat or partition your drive at some point in the future. Please be aware that partitioning and formatting your SSD will destroy all existing data on the drive. Make sure that you have a backup copy of your data before you partition or format your SSD. Consult your operating system user guide for details on partitioning and formatting drives – depending o
ملخص المحتوى في الصفحة رقم 16
2. Double-click Computer Management. 3. Click Disk Management. A list of drives appears. 14
ملخص المحتوى في الصفحة رقم 17
4. Right-click inside the section with unallocated disk space, and then select New Partition. 5. The New Partition Wizard appears. Click Next. 15
ملخص المحتوى في الصفحة رقم 18
6. Select Primary partition, and then click Next. 7. Leave the Partition size in MB at the default setting, and then click Next. 16
ملخص المحتوى في الصفحة رقم 19
8. Select Assign the following drive letter:, and then click Next. 9. Select Format this partition with the following settings:. In the File system field, select FAT32 or NTFS, and then click Next. NOTE: Although the Windows 2000/XP Fast FAT driver can support volumes larger than 32GB using the FAT32 file system (subject to other system limits), by design you cannot create a volume in excess of 32GB using the Format Partition interface. Instead, Microsoft recommends
ملخص المحتوى في الصفحة رقم 20
10. When the formatting completes, click Finish to close the New Partition Wizard. 11. The SSD should appear in the Computer Management screen as another storage drive. 18
