ملخص المحتوى في الصفحة رقم 1
HS-2601A
Intel Low Power Mobile 500MHz
Mini Board Computer
•3.5” Size•All-in-One•CRT/Panel•LAN•WDT•
•DOC•2 USB•IrDA•PC/104•Flash Disk•
•PCI Bus Mini Board•
ملخص المحتوى في الصفحة رقم 2
Copyright Disclaimers Copyright Disclaimers Copyright Disclaimers The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advis
ملخص المحتوى في الصفحة رقم 3
Table of Contents Chapter 1 General Description ---------------------------------6 1.1 Major Features ------------------------------------------------------2 1.2 Specifications -------------------------------------------------------3 1.3 Board Dimensions -------------------------------------------------4 Chapter 2 Unpacking ---------------------------------------------5 2.1 Opening the Delivery Package---------------------------------5 2.2 Inspection-------------------------------------
ملخص المحتوى في الصفحة رقم 4
3.17 Power Connectors ----------------------------------------------- 18 CN1: 4-pin Power Connector ----------------------18 CN5: 2-pin Power Input Connector----------------19 3.18 Keyboard/Mouse Connectors -------------------------------- 19 CN8: 6-pin Keyboard/Mouse Connector ---------19 CN7: PS/2 6-pin Mini DIN Keyboard/Mouse Connector-------------------------------------------19 3.19 System Front Panel Connectors ---------------------------- 19 LD2: IDE LED Connector ----------------
ملخص المحتوى في الصفحة رقم 5
Safety Instructions Safety Instructions Safety Instructions Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This helps to discharge any
ملخص المحتوى في الصفحة رقم 6
This page intentionally left blank.
ملخص المحتوى في الصفحة رقم 7
Chapter 1 General Description ® The HS-2601A is a 100MHz Intel BX chipset-based Mini PCI Bus Intel Mobile board. With features such as enhanced I/O effects with CRT/VGA, and LAN all combined, the HS-2601A is an ideal all-in-one compact-size board for the demanding embedded applications and IA platforms. Its onboard DMA33 to IDE drive interface architecture allows the HS-2601A to support data transfers of 33MB/sec with a maximum of ® two IDE drives. Its Intel BX chipset design makes it
ملخص المحتوى في الصفحة رقم 8
To ensure the reliability in an unmanned or standalone system, the Watchdog Timer (WDT) onboard HS-2601A is designed with pure hardware that does not need the arithmetical functions of a real-time clock chip. If any program causes unexpected halts to the system, the onboard Watchdog Timer (WDT) will automatically reset the CPU or generate an interrupt to resolve such condition. 1.1 Major Features The HS-2601A comes with the following features: BGA Packaged Intel Low Power Mobile CPU a
ملخص المحتوى في الصفحة رقم 9
1.2 Specifications CPU: Intel Low Power Mobil CPU from 500-800 MHz Bus Interface: Mini PCI Local Bus Memory: One SO-DIMM socket supporting up to 256MB Chipset: Intel 82443BX I/O Chipset: Winbond W83977 VGA: C&T 69000 with 2MB memory supporting CRT/Panel displays up to 1280 x1024 at 256 colors IDE: Two IDE disk drives supporting ATA/33 and with a transfer rate up to 33MB/sec Flash Disk: 8~64 MB IDE interface Flash Disk support (optional) FDD: Supports up to two floppy disk
ملخص المحتوى في الصفحة رقم 10
1.3 Board Dimensions 4
ملخص المحتوى في الصفحة رقم 11
Chapter 2 Unpacking 2.1 Opening the Delivery Package The HS-2601A is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures. 2.2 Inspection After unpacking the board, place it on a raised surface and carefully inspect the board for any damage that might have occurred d
ملخص المحتوى في الصفحة رقم 12
It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately. 6
ملخص المحتوى في الصفحة رقم 13
Chapter 3 Hardware Installation This chapter provides the information on how to install the hardware using the HS-2601A. This chapter also contains information related to jumper settings of switch, watchdog timer, and the DiskOnChip address selection etc. 3.1 Before Installation After confirming your package contents, you are now ready to install your hardware. The following are important reminders and steps to take before you begin with your installation process. 1. Make sure that a
ملخص المحتوى في الصفحة رقم 14
3.2 Board Layout 8
ملخص المحتوى في الصفحة رقم 15
3.3 Jumper List Jumper Definition Default Page JP1 Watchdog Timer Active Type Select Short 2-3 20 JP2 Panel Voltage Select Short 1-2 12 JP4 Clear CMOS Short 1-2 18 3.4 Connector List Connector Definition Page JP3 Reset Button 20 CN1 4-pin Power In Connector 18 CN2 PC/104 64-pin Connector 26 CN3 PC104 40-pin Connector 25 CN4 RJ45 and LAN LED Connector 17 CN5 2-pin Power In Connector 18 CN6 CRT Connector 12 CN7 PS/2 6-pin Mini Din KB/Mouse Connector 19 CN8 6-pin Keyboard/Mouse Conn
ملخص المحتوى في الصفحة رقم 16
3.6 System Memory The HS-2601A provides one SO-DIMM socket at location U2. This onboard memory socket can support 64MB, 128MB and 256MB SO-DIMM modules. The system’s maximum memory capacity is 256MB. 143 1 144 2 144-pin SO-DIMM Socket pin orientation SO-DIMM sockets out on the market these days have very fragile NOTE: contacts that attach to modules. We highly recommend you not to regularly remove the installed SO-DIMM from its socket. Doing so may wear out the contact between the soc
ملخص المحتوى في الصفحة رقم 17
DiskOnChip 3. Once you have figured out where the pin 1 locations are on both chip and socket, align the module’s pins on an upright angle against the socket. Using both thumbs, gently press the module into the socket until all the pins are secured to their designations. Pin 1 Location 4. The installation is now complete and your module is now ready for use. NOTE: If you encounter difficulty installing your DiskOnChip module, please consult a qualified technician or engineer to perfo
ملخص المحتوى في الصفحة رقم 18
3.8 VGA Controller The HS-2601A has an onboard jumper that selects the working voltage of the flat panel connected to the system. Jumper JP2 offers two voltage settings for the user. JP2: Panel Voltage Select Options Settings 5.0 V (default) Short 1-2 3 2 1 3.3 V Short 2-3 WARNING: Please contact the supplier of your panel and make sure of the correct voltage it uses. Incorrect settings on JP8 may cause internal damage to your panel. The built-in C&T 69000 CRT/Panel display control
ملخص المحتوى في الصفحة رقم 19
CN10: 50-pin Panel Connector PIN. Description PIN Description 1 +12V 2 +12V 3 GND 4 GND Note 5 3.3V / 5V 6 ENAVDD 7 ENAVEE 8 GND 9 P0 10 P1 11 P2 12 P3 13 P4 14 P5 15 P6 16 P7 17 P8 18 P9 19 P10 20 P11 21 P12 22 P13 23 P14 24 P15 25 P16 26 P17 27 P18 28 P19 29 P20 30 P21 31 P22 32 P23 33 P24 34 P25 35 SHFCLK 36 FLM 37 M 38 LP 39 GND 40 ENABKL 41 P26 42 P27 43 P28 44 P29 45 P30 46 P31 47 P32 48 P33 49 P34 50 P35 47 45 43 41 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11
ملخص المحتوى في الصفحة رقم 20
3.9 IDE Drive Connector CN12, a 44-pin connector, provides the PCI E-IDE drive provisions onboard. A maximum of four IDE drives may be connected on them. CN12: Primary IDE Connector CN15 Description CN15 Description 1 BRSTDRVJ 2 GND 3 DD7-1 4 DD8-1 5 DD6-1 6 DD9-1 7 DD5-1 8 DD10-1 9 DD4-1 10 DD11-1 11 DD3-1 12 DD12-1 13 DD2-1 14 DD13-1 15 DD1-1 16 DD14-1 17 DD0-1 18 DD15-1 19 GND 20 N/C 21 RPDDREQ- 22 GND 23 RPDIOW- 24 GND 25 RPDIOR- 26 GND 27 PIORDY 28 PRIPD1- 29 RPDACK- 30
