ملخص المحتوى في الصفحة رقم 1
PX865PEL-800
Copyright
All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or computer language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of the company. Brands and product names are trademarks or registered
trademarks of their respective companies.
The vendor makes no representatio
ملخص المحتوى في الصفحة رقم 2
PX865PEL-800 ® Intel 82865P & ICH5 ® ® Supports Socket 478 Intel Pentium 4 Processor Enabling Hyper-Threading Technology for your computer system requires ALL of the following components ® ® CPU: An Intel Pentium 4 Processor with HT Technology ® Chipset: An Intel Chipset that supports HT Technology BIOS: A BIOS that supports HT Technology and has it enabled OS: An operating system that supports HT Technology For more information on Hyper-Threading Technology, go to: http:
ملخص المحتوى في الصفحة رقم 3
Contents CHAPTER 1. GETTING STARTED ............................................................1 INTRODUCTION.......................................................................................................... 1 SPECIFICATION.......................................................................................................... 2 QUICK CONTENT TABLE ........................................................................................... 5 CONFIGURATION ..........................
ملخص المحتوى في الصفحة رقم 4
PX865PEL-800 Chapter 1. Getting Started Introduction Congratulations on choosing the PX865PEL-800 mainboard! It is based on the 82865P Northbridge ® ® chipset and the ICH5 Southbridge chipset. It supports Intel Pentium 4 (Northwood/ Prescott) Processors with a FSB (Front Side Bus) frequency of 400/533 MHz. It also supports FSB frequency of 800 MHz by overclock. The PX865PEL-800 provides 3 DIMM sockets using 184 pin DDR SDRAM with a total capacity of up to 2GB. You can install u
ملخص المحتوى في الصفحة رقم 5
PX865PEL-800 Specification CPU: ® Supports Socket 478 Pentium 4 processor (Northwood/ Prescott) Supports Hyper Threading Technology Speed: 400/ 533 MHz Front Side Bus frequency 33MHz, 32 bit PCI interface (PCI 2.3 compliant) 66MHz AGP 3.0 compliant interface that supports 8X/4X data transfer modes (0.8V or 1.5V) Chipset: Northbridge Chip (MCH) – Intel 82865P Southbridge Chip (ICH) – Intel ICH5 I/O Controller – Winbond W83627HF Audio Codec – ALC650 LAN Control
ملخص المحتوى في الصفحة رقم 6
PX865PEL-800 Universal Serial Bus: Supports up to six USB 2.0 ports for USB interface devices BUS Slots: 1 AGP slot (AGP3.0 Compliant) Five 32-bit PCI bus slots Flash Memory: Supports flash memory functionality Supports ESCD functionality Hardware Monitor Function: Monitors all fan Speeds Monitors System Voltage Infrared: Supports IrDA Version 1.0 SIR Protocol with a maximum baud rate of up to 115.2 Kbps Supports SHARP ASK-IR Protocol with maximum baud ra
ملخص المحتوى في الصفحة رقم 7
PX865PEL-800 IDE Facilities: Supports Ultra ATA 33, Ultra ATA 66, Ultra ATA 100, BMIDE and PIO modes Supports IDE interface with CD-ROM Supports high capacity hard disk drives Supports installation of up to 4 drives, with separate IDE connections for Primary and Secondary connectors I/O facilities: One multi-mode Parallel Port capable of supporting the following specifications: 1. Standard & Bi-direction Parallel Port 2. Enhanced Parallel Port (EPP) 3. Extended Capabili
ملخص المحتوى في الصفحة رقم 8
PX865PEL-800 Quick Content Table Function Content Location Page CPU Socket 478 U6 7 DDR DIMM 1、2、3 DDR DIMM Sockets 8 ATX Power Connector ATX_ PWR、ATX_12V 18 IDE Connectors IDE1/2、SATA1/2 13 FDC Connector FDC 13 AGP Slot AGP 17 PCI Slots PCI 1、2、3、4、5 17 CPU FAN、Chassis FAN、 CPUFAN、CHASFAN、AUXFAN 8 Auxiliary FAN Front Panel Indicator SW/LED 12 Speaker Connector SPEAKER 12 Infrared Connector IrDA 15 USB2、USB3 Front USB Headers 14 Clear CMOS Jumper JP1 15 Case Open Wa
ملخص المحتوى في الصفحة رقم 9
PX865PEL-800 Configuration Layout of PX865PEL-800 KB/MS 1 U6 CPUFAN USB/LAN Socket 478 PRT/COM ATX_12V Intel 82865P U12 SOUND AUXFAN 1 Winbond W83627HF PCI1 ALC 650 BAT1 PCI2 PCI3 LAN U19 CHIP PCI4 IDE2 IDE1 Intel 1 ICH5 SATA2 U22 JP1 1 CASEOPEN PCI5 BIOS SATA1 CHASFAN 1 SW/LED FDC CD-IN 2 10 FRONT AUDIO 1 PWRLED IrDA SPDIF USB2 USB3 SPEAKER 1 2 1 2 2 2 10 1 9 1 1 1 1 1 9 6 DIMM1 DIMM2 DIMM3 ATX_PWR
ملخص المحتوى في الصفحة رقم 10
PX865PEL-800 Hardware Installation This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before handling components. Electrostatic discharge may damage your system components. CPU Processor Installation ® ® This mainboard supports Intel Pentium 4 processors using a Socket 478. Before building your system, we suggest you visit the Intel website and review the processor installation procedures. http://www.intel.com CPU Socket 478 Config
ملخص المحتوى في الصفحة رقم 11
1 So cket 478 Intel 82865P 1 Winbond W83627HF AL C 65 0 LAN CHIP Intel 1 ICH5 1 BIOS 1 2 10 1 2 1 1 1 2 2 2 10 1 1 11 9 1 9 PX865PEL-800 FAN Headers Three power headers are available for cooling fans, which play an important role in maintaining the ambient temperature in your system. 1 +12V Socket 478 Ground Sensor 1 +12V Ground Sensor Intel CPUFAN 82865P 1 1 Winbond W83627HF +12V ALC 650 AUXFAN Ground Sensor LAN CHIP 1 Intel 1 ICH5 1 BIOS CHASFAN 1 2 10 1 2 1 2
ملخص المحتوى في الصفحة رقم 12
PX865PEL-800 If you are using DIMM2 and DIMM3 simultaneously, you must use single-sided memory modules with the total memory used by these two sockets not exceeding 1 GB. If you will be using double-sided DDR DIMM modules, you can only install up to 2 modules. When using 2 double-sided DDR DIMM modules, we recommend that you them install into DIMM1 and DIMM2. If you are installing only 1 double-sided DDR DIMM module, we recommend that you install it into either DIMM1 or DIMM2.
ملخص المحتوى في الصفحة رقم 13
PX865PEL-800 Back Panel Configuration PS/2 Game Port Printer Port LAN Mouse USB COM1 COM2 PS/2 Speaker Mic In Keyboard Out Line In PS/2 Mouse & PS/2 Keyboard Connectors: KB/MS This mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin assignments are described below: PS/2 Mouse Pin Assignment Pin Assignment 1 Data 4 +5 V (fused) 2 No connect 5 Clock 3 Ground 6 No connect PS/2 Keyboard USB & LAN Connectors: USB/ LAN T
ملخص المحتوى في الصفحة رقم 14
PX865PEL-800 Serial and Parallel Interface Ports The mainboard comes equipped with two back panel serial ports and one parallel port. These interface ports will be explained below. Printer Port COM1 COM2 Parallel Interface Port: PRT The parallel port on your system has a 25-pin, DB25 connector and is used to interface with parallel printers and other devices using a parallel interface. The Serial Interface: COM1/ COM2 The serial interface port is sometimes referre
ملخص المحتوى في الصفحة رقم 15
1 Socket 478 Intel 82865P 1 Winbond W83627HF ALC 650 LAN CHIP Intel 1 ICH5 1 BIOS 1 2 10 1 2 1 1 1 2 2 2 10 1 1 11 9 1 9 PX865PEL-800 Front Panel Indicator: SW/LED、PWRLED、 SPEAKER PC_BEEP 1 NC 2 Ground 3 +5V 4 SPEAKER 1 + 2 - 3 PWRLED 1 2 Hard Driver HD LED (+) Power LED (+) Power LED HD LED (-) Power LED (-) LED Reset Reset Control (-) Power Button (+) Power-on Reset Control (+) Power Button (-) Button Button NC NC 9 10 SW/LED HD LED (Hard Drive LED Connector) T
ملخص المحتوى في الصفحة رقم 16
1 So cket 478 Intel 82865P 1 Winbond W83627HF ALC 650 LAN CHIP Intel 1 ICH5 1 BIOS 1 2 10 1 1 2 1 2 2 2 10 1 1 1 19 1 9 1 PX865PEL-800 Connectors Floppy Disk Connector: FDC This mainboard provides a standard floppy disk connector (FDC) that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy diskettes. This connector supports the floppy drive ribbon cables provided in the packaging. Hard Disk Connectors: IDE1-2/ SATA1-2 This mainboard has a 32-bit Enhanced PCI IDE Controller that
ملخص المحتوى في الصفحة رقم 17
1 So cket 478 1 Socket 478 Intel 82865P Intel 82865P 1 Winbond W83627HF 1 Winbond ALC W83627HF 65 0 ALC 65 0 LAN CHIP LAN Intel CHIP 1 ICH5 1 Intel 1 BIOS ICH5 1 BIOS 1 1 2 10 2 1 2 2 10 1 1 1 2 9 1 11 1 9 1 2 10 1 2 1 2 10 1 1 22 1 11 9 1 1 9 PX865PEL-800 Headers & Jumpers Case Open Warning Jumper: CASE OPEN This connector is used to notify the user when the computer case has been previously opened. To configure this functionality, your computer case must be equipped with a “ case o
ملخص المحتوى في الصفحة رقم 18
1 So cket 478 1 Socket 478 Intel 82865P Intel 1 82865P Winbond W83627HF ALC 65 0 1 Winbond W83627HF AL C 65 0 LAN CHIP Intel 1 ICH5 LAN 1 CHIP BIOS Intel 1 ICH5 1 1 1 2 10 2 1 2 2 2 10 1 1 1 19 1 BIOS 1 1 9 1 1 2 10 2 1 1 2 22 10 1 1 1 19 1 1 9 PX865PEL-800 Infrared Header: IrDA This IrDA connector can be configured to support wireless infrared and is used to attach to an infrared sensing device. After the IrDA interface is configured, you can use this connector for connectionless da
ملخص المحتوى في الصفحة رقم 19
1 Socket 478 Intel 82865P 1 Winbond W83627HF ALC 650 LAN CHIP Intel 1 ICH5 1 BIOS 1 2 10 1 2 1 1 2 2 2 10 1 1 11 9 1 9 1 PX865PEL-800 Audio Connectors This mainboard provides three connectors as part of its audio Subsystem. 12 MIC Ground MIC_VREF +5V Front out_R Rear out_R NC NC Front out_L Rear out_L FRONT AUDIO Left In 1 Ground 2 Ground 3 Right In 4 CD-IN 1 +5V 2 NC 3 SPD_OUT 4 Ground 5 SPD_IN SPDIF CD-ROM Audio-In Header: CD-IN This header is used to con
ملخص المحتوى في الصفحة رقم 20
1 So cket 478 Intel 82865P 1 Winbond W83627HF ALC 650 LAN CHIP Intel 1 ICH5 1 BIOS 1 1 2 10 1 2 1 2 2 2 10 1 1 11 9 1 1 9 PX865PEL-800 Slots The slots in this mainboard are designed for expansion cards used to complement and enhance the functionality of the mainboard. PCI Slots AGP Slot AGP (Accelerated Graphics Port) Slot This mainboard is equipped with an Accelerated Graphics Port (AGP) (0.8V or 1.5V) to support video cards. And the mainboard also comes with A
