ملخص المحتوى في الصفحة رقم 1
User’s Guide
M3202C
M3702C
Make sure to read the Safety Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your dealer when you ask
for service.
ملخص المحتوى في الصفحة رقم 2
Connecting the stand - Only on some models. 1. Take the parts for the stand out of the box and assemble them as shown in the picture. First, check if the following parts are all present. Parts Stand Cover(1) Screws (6) Stand (1) 2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. 3. Use the screws to secure the stand on the rear side of the product as shown in the diagram. 1
ملخص المحتوى في الصفحة رقم 3
Connecting the Stand cover - Only on some models. 1. Disassemble the stand cover. The cover may be easily disassembled by pressing up on the base as shown in the figure. Stand cover 2. After connecting the cables, correctly position the stand cover into the holes on the stand. If securely connected, you will hear the latch click into place. 2
ملخص المحتوى في الصفحة رقم 4
Connecting the Speakers - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. Type 1 When the speaker is installed. 3
ملخص المحتوى في الصفحة رقم 5
Connecting the Speakers - Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. Type 2 After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in all model. When the speaker is installed. Cable tie * This feature is not available in all model. 4
ملخص المحتوى في الصفحة رقم 6
Using the Remote Control Name of the Remote Control Buttons • Power On/Off Button • AV Button • Input Select Button (See next page) • Sleep Button • ARC button When watching AV, RGB PC,HDMI/DVI Aspect Ratio Correction. Toggles ,Component1, Component2 through aspect ratio options. The product will be automatically turned • Auto Button off after a certain period of time. Automatic adjustment function Press this button repetitively to 1 2 3 (Operational for the analog signal only) select an appropr
ملخص المحتوى في الصفحة رقم 7
Name and Function of the Parts * The product image in the user’s guide could be different from the actual image. Rear View AV IN/OUT Power Connector : Connect the power cord Wired Remote Control Port RS-232C Serial Ports RGB, HDMI/DVI Ports PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card. AV Ports Speaker Ports *LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card
ملخص المحتوى في الصفحة رقم 8
Connecting to External Devices When Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the D-Sub signal input cable. A B When connecting with the HDMI to DVI signal input cable (not included). A PC Rear side of the product. PC/MAC MAC Macintosh Adapter (not included) Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system)
ملخص المحتوى في الصفحة رقم 9
Connecting to External Devices 1 Turn on power by pressing the power button on the product. INPUT AUTO/SET Power button Turn on the PC. 2 Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET Or, press the INPUT botton on the bottom of the product. INPUT Input AUTO/SET Input AV AV A When connecting with a D-Sub signal input cable. Component1 Component1 • Select RGB PC : 15-pin D-Sub analog signal. Component2 Component2 RGB PC RGB PC B When c
ملخص المحتوى في الصفحة رقم 10
Connecting to External Devices Daisy Chain Monitors Use this function when displaying ANALOG RGB inputs of a PC to the other product. • To use different products connected to each other Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products. 15-pin D-Sub Signal Cable RGB IN RGB IN RGB IN RGB IN RGB OUT RGB OUT RGB OUT RGB OUT PC PC Product 2 Product 3 Product 4 Product 1 Note
ملخص المحتوى في الصفحة رقم 11
Connecting to External Devices VESA FDMI wall Mounting This product supports a VESA FDMI compliant mounting interface. These mounts are purchaed separately and not available from LG. Refer to the instructions included with hte mount for more info. The Set is equipped with a kensington Securify System connector on the back panel. The cable and lock are available separate and are not sold by LG. For more info, visit http://www.kensington.com, the internet home page of the Kensington company. 10
ملخص المحتوى في الصفحة رقم 12
Connecting to External Devices • AV Button • Input Select Button Toggles through video If you press the button once, the following Input Signal AV Component1 Window will appear. Select Component2 RGB PC the signal type you want HDMI/DVI using the button. Input 1 2 3 AV Component1 4 5 6 Component2 RGB PC HDMI/DVI 7 8 9 0 * Inserting batteries into remote control. 1. Slide off the battery cover. 2. Insert the batteries with correct polarity (+/-). 3. Close the bat
ملخص المحتوى في الصفحة رقم 13
Connecting to External Devices Video Input Connect the video cable as shown in the below figure and then connect the power cord (See page 7). When connecting with a S-Video cable. When connecting with a BNC cable. A B • Connect to the S-Video input terminal to • Connect the input terminal with a watch high image quality movies. proper color match. Product Product IN IN OUT OUT Audio Cable (not included) Audio Cable BNC Cable (not included) S-Video Cable (not included) (not included) VCR/DVD Rece
ملخص المحتوى في الصفحة رقم 14
Connecting to External Devices Component Input (480i/480p/576i/576p/720p/1080i) Connect the video/audio cable as shown in the below figure and then, connect the power cord (See page 7). • Connect the input terminal with a proper color match. Product Product A M M B BNC Cable Audio Cable Audio Cable BNC Cable (not included) (not included) (not included) (not included) HDTV Receiver HDTV Receiver Note - Some devices may require HDCP in order to display HD signals. - Component doesn't support HDCP
ملخص المحتوى في الصفحة رقم 15
Connecting to External Devices HDMI Input (480p/576p/720p/1080i/1080p) -HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. Connect the video/audio cable as shown in the below figure and then connect the power cord (See page 7). Product Product HDMI to DVI RCA-PC Signal Cable HDMI Signal Cable Audio Cable (not included) (not included) VCR/DVD/Set-top Box VCR/DVD/Set-top Box Note : Dolby Digital is n
ملخص المحتوى في الصفحة رقم 16
Connecting to External Devices Watching AV Outputs - When using AV input, you can connect the AV Out to other monitors. Video/TV BNC Cable Audio Cable (not included) (not included) IN Product OUT Audio Cable BNC Cable (not included) (not included) Video/TV Note • When multi-connecting in/out cascade format, no loss cables are recommended. We recommend that you should use cable distributor. 15
ملخص المحتوى في الصفحة رقم 17
User Menus Screen Adjustment options INPUT AUTO/SET • Press this button to turn on the power. Press this button again to Power Button turn it off. • This Indicator lights up green when the display operates normally (on Power Indicator mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. • Use this button to show/hide the OSD (On Screen Display) menu MENU Button screen. • Use this button to select an icon or adjust the setting in the OSD screen. OSD Selec
ملخص المحتوى في الصفحة رقم 18
User Menus Screen Adjustment options [For PC Analog signal] AUTO/SET Button Auto in progress For opimal display change resolution to 1360 X 768 [When XGA Mode is active and 1360 X768 is selected] SOURCE INPUT Button AUTO/SET - Toggles between inputs Input AV Composite Video, Separate Video AV Component 1 HDTV, DVD Component1 Component 2 HDTV, DVD Component2 RGB PC 15-pin D-Sub analog signal RGB PC HDMI/DVI Digital signal HDMI/DVI • This is where the unit receives signals from the remo
ملخص المحتوى في الصفحة رقم 19
User Menus OSD Menu Icon Function Description Adjusts screen brightness, contrast and color that you prefer. Picture Adjusts the audio options. Audio Adjusts the timer options. Time Adjusts the screen status according to the circumstances. Option Adjust Set ID and check Serial No. and SW version. Information Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. 18
ملخص المحتوى في الصفحة رقم 20
User Menus How to adjust the OSD (On Screen Display) screen Save Pops up Move where Select a Move where Select a Exit from the Adjust the status adjustment the menu you want to menu icon you want to menu icon menu screen. screen adjust adjust • Use the remote control to adjust the OSD screen. 1 Press the MENU Button, then the main menu of the OSD appears. To access a control, use the Buttons. 2 3 When the icon you want becomes highlighted, press the SET Button. Use the
