ملخص المحتوى في الصفحة رقم 1 
                    
                        Nuvo Video Display Systems – User Manual 
 
Nuvo Surgical 
Video Display System 
 
Model V1360A 
USER MANUAL 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
For Parts or Technical Assistance 
USA and CANADA (800) 663-1152 
INTERNATIONAL (814) 899-422 
M2Z00167 Page 1                                                                                                                                                                                                                                                        
                    
                    ملخص المحتوى في الصفحة رقم 2 
                    
                        Nuvo Video Display Systems – User Manual  Table of Contents  Intended Use 3  Product Overview 4  Surgical Monitor Positioning 5  Instructions for Use 6  To Turn the Monitor On/Off 6  To Connect a Video Source to the Video Display System 7  To Connect the Video Display System to a Display or Recording Device 8  To Select a Video Signal for Display at a Monitor Using the Wall Control 9  To Select a Video Signal for Display at a Monitor Using the Monitor Handle 10  To Remove the Sterile Handle and 
                    
                    ملخص المحتوى في الصفحة رقم 3 
                    
                        Nuvo Video Display Systems – User Manual    Intended Use      The Nuvo Video Display System    The Nuvo Surgical Monitor is intended to be used primarily by a surgeon to view images  generated by an endoscopic camera.      Introduction    This manual provides the information required for normal operation of the Nuvo Video  Display System.  Before operating the Nuvo Surgical Monitor, be sure that you have read  and understand the contents of this manual.  It is important that you read and strictl
                    
                    ملخص المحتوى في الصفحة رقم 4 
                    
                        Nuvo Video Display Systems – User Manual    Nuvo Surgical Monitor Product Overview      Positioning Monitor Features  • Vertical axis rotates 300° • 19" flat-screen medical grade Liquid Crystal Display  • Monitor rotates 300°  • Up to four input channels (with optional switching  system)  • Drift-resistant positioning  • Wall-mounted input/output selector (with optional  • Minimal airflow disturbance  switching system)  • Stows out of the way    • Single or dual monitor mounts  Maintenance Featu
                    
                    ملخص المحتوى في الصفحة رقم 5 
                    
                        Nuvo Video Display Systems – User Manual      Surgical Monitor Positioning      The Nuvo Surgical Monitor system provides the surgeon with a suspension arrangement that is  well balanced and can be guided easily into position.  The suspension arms rotate 300° around the ceiling mount, and are positioned 180 ° apart to avoid  interfering with each other.  The counterbalance arm rotates 300° around its vertical extension.   These extension pieces are custom-sized according to the ceiling height, a
                    
                    ملخص المحتوى في الصفحة رقم 6 
                    
                        Nuvo Video Display Systems – User Manual      Instructions for Use of the Nuvo Video Display System      The Nuvo Video Display System is designed to view images from multiple sources, such as  endoscopic cameras, remote video cameras, radiology, pathology, PACS, etc.    Systems may handle up to four separate input signals via an optional video switching board,  although basic systems only handle one input.      Each source can be easily selected and viewed by pressing a button on the wall contr
                    
                    ملخص المحتوى في الصفحة رقم 7 
                    
                        Nuvo Video Display Systems – User Manual    To Connect a Video Source to the Video Display System      CAUTION:      Take care to align the pins on the connector with the holes in the plug on the  input panel.  Do not force the connector into the plug as this may damage the  connector.    Plug the video cable (supplied by others) into a Video Input Panel having the same video format.                   Composite Video                                 S-Video                                      RG
                    
                    ملخص المحتوى في الصفحة رقم 8 
                    
                        Nuvo Video Display Systems – User Manual    To Connect the Video Display System to a Display      CAUTION:      Take care to align the pins on the connector with the holes in the plug on the  output panel.  Do not force the connector into the plug as this may damage the  connector.    Plug the video cable (supplied by others) into the nearest appropriate Video Output Panel.    NOTE:  Output panels are provided with sockets for each video format available for input signals, with the  exception th
                    
                    ملخص المحتوى في الصفحة رقم 9 
                    
                        Nuvo Video Display Systems – User Manual    To Select a Video Signal for Display at a Monitor Using the Optional Wall  Control      NOTE:  This section applies only to systems with the optional video switching.    NOTE:  The Wall Control Panel is an optional feature and may not be included in the system.  Identical  functionality is available from the button, if provided, on the monitor’s sterilizable handle.    1. Determine whether Monitor A or Monitor B is to be switched.    2. Go to the Wall 
                    
                    ملخص المحتوى في الصفحة رقم 10 
                    
                        Nuvo Video Display Systems – User Manual    To Select a Video Signal for Display at a Monitor Using the Monitor Handle      NOTE:  This section applies only to systems with the optional video switching.    Video Display Systems with switching capability may be provided with a button at the bottom of  the sterilizable handle adjacent to each monitor.  Channel selection is achieved by repeatedly  pressing this button until the desired image is displayed.        NOTE:  The selection button on the h
                    
                    ملخص المحتوى في الصفحة رقم 11 
                    
                        Nuvo Video Display Systems – User Manual    To Remove the Sterilizable Handle and Reinstall                                To Remove: Grasp the handle, and rotate it counterclockwise until the handle is loose.    To Install: • Install the handle onto the monitor cradle.  • Rotate the handle clockwise until fully seated against the O-Ring  • Activate the selection button, if provided, to verify operation.    NOTE:  The Sterilizable Handle must be sterile during surgical procedures.  Therefore, su
                    
                    ملخص المحتوى في الصفحة رقم 12 
                    
                        Nuvo Video Display Systems – User Manual    Maintenance        WARNING:      Only facility-authorized maintenance personnel should perform maintenance on the  Nuvo Surgical Monitor.  Maintenance performed by unauthorized personnel could  result in personal injury or equipment damage.      Cleaning/Sterilization    Cleaning:    CAUTION:  Care should be taken not to pour cleaning fluids onto the rotating joints or monitor.     It is recommended to use a moist cloth to wipe down the joints and moni
                    
                    ملخص المحتوى في الصفحة رقم 13 
                    
                        Nuvo Video Display Systems – User Manual    The sterilizable handle can be sterilized three ways:  • Cold, by using cleaners recommended for hospitals and authorized by a competent health  authority  • Steam  • Flash in either gravity displacement or pre-vacuum sterilizers    The minimum flash exposure times are shown in the following table:    Handle Cleaning and Sterilization  Sterilize cycle Temperature Exposure Time  Gravity displacement 270-274° F @ 30 psi (132-134° C @ 207 3 minutes  kPa  
                    
                    ملخص المحتوى في الصفحة رقم 14 
                    
                        Nuvo Video Display Systems – User Manual  Preventive Maintenance    Annual preventive maintenance must be performed by Nuvo authorized personnel to ensure all  feature are functioning as originally designed.    Pay particular attention to:  • The condition of the video input and output connectors  ® • System drift adjustment.  See the picture below for Allen wrench sizes.        Consumable Parts    • Sterilizable handle with Control Button   Part number S2A00074  • Sterilizable handle without Co
                    
                    ملخص المحتوى في الصفحة رقم 15 
                    
                        Nuvo Video Display Systems – User Manual  Troubleshooting      Image Not Displayed    Monitor not powered on    Turn monitor power switch to ON  Video source not powered on   Turn video source power switch to ON  Damaged video cable    Replace with good cable  Input selection doesn’t match image  Re-select the input using the wall control  Incorrect monitor selection   Select correct inputs for “A” and “B” monitors  Incorrect input selection    Select correct inputs for “A” and “B” monitors  Mon
                    
                    ملخص المحتوى في الصفحة رقم 16 
                    
                        Nuvo Video Display Systems – User Manual  Nuvo Video Display System Specifications      Dimensions for Product V1360 Nuvo Video Display Systems    Feature Dimension  Counterbalance arm outer clevis to finish floor 78" (198 cm)  Suspension arm inner hub center line to outer hub 26.75" (68 cm)  center line  Suspension arm inner hub center line to outer most 67" (170 cm)  point on monitor frame  Monitor size 19" (48 cm)  Minimum ceiling height Maintaining a 78" (198 cm) minimum  counterbalance arm 
                    
                    ملخص المحتوى في الصفحة رقم 17 
                    
                        Nuvo Video Display Systems – User Manual    Environmental Conditions for Transport and Storage    Description Specification  Temperature -4°F(-20°C) to 140°F (60°C)  Relative humidity 20% to 90% non-condensing  Pressure 50 kPa to 106 kPa       Environmental Conditions for Use    Description Specification  Temperature 59°F (15°C) to 95°F (35°C) ambient temperature  Relative humidity range 5% to 80% non-condensing        Mains Power Requirements    Rated Voltage Maximum Current Rated Frequency  10