ملخص المحتوى في الصفحة رقم 1 
                    
                        Quick Setup Guide
MFC-7860DW
Start Here
Please read the Safety and Legal booklet first before you set up your machine. Then, please read this Quick Setup 
Guide for the correct setup and installation.
To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/.
WARNING indicates a potentially hazardous situation which, if not avoided, 
WARNING
could result in death or serious injuries.
CAUTION  indicates a potentially hazardous situation which, if not avoided, ma
                    
                    ملخص المحتوى في الصفحة رقم 2 
                    
                        CAUTION CAUTION When you move the machine, grasp the side handholds that are under the scanner. DO NOT carry the machine  by holding it at the bottom. Note • Keep a minimum gap around the machine as shown in the illustration. 9.85 in. (250 mm) 3.55 in. 3.95 in. 3.95 in. (90 mm) (100 mm) (100 mm) • The components included in the box may differ depending on your country. • Please save the original packaging should you need to ship the machine in future. • If for any reason you must ship your machi
                    
                    ملخص المحتوى في الصفحة رقم 3 
                    
                        d Lift the elastic band off the drum. Remove the packing  material from the  2 machine  IMPORTANT DO NOT connect the AC power cord yet. a Remove the packing tape from the outside of  the machine and the film covering the scanner  glass. b Open the front cover. e Pull the paper strip to remove the protective  material as shown in the illustration. c Remove the Silica Pack from the inside of the  machine. f Take out the drum unit and toner cartridge  assembly. CAUTION CAUTION DO NOT eat the Silica
                    
                    ملخص المحتوى في الصفحة رقم 4 
                    
                        g Gently shake it from side to side several times  to distribute the toner evenly inside the  Load paper in the paper  assembly. tray 3 a Pull the paper tray completely out of the  machine. h Put the drum unit and toner cartridge assembly  back in the machine. b While pressing the green paper-guide release  levera, slide the paper guides to fit the paper  size you are loading in the tray. Make sure that  the guides are firmly in the slots. i Close the front cover of the machine. 1 4             
                    
                    ملخص المحتوى في الصفحة رقم 5 
                    
                        d Put paper in the tray and make sure: Note  The paper is below the maximum paper  For Legal or Folio size paper, press the release  mark (bbb)a. button in the bottom of the paper tray and then  Over filling the paper tray will cause paper  pull out the back of the paper tray. jams. (Legal or Folio size paper are not available in   The side to be printed on must be face down. some regions.)  The paper guides touch the sides of the  paper so it will feed properly. 1 c Fan the stack of paper we
                    
                    ملخص المحتوى في الصفحة رقم 6 
                    
                        WARNING Connect the power cord  The machine must be grounded using a  and telephone line 4 3-prong plug. Since the machine is grounded through the  power outlet, you can protect yourself from   IMPORTANT potentially hazardous electrical conditions on  DO NOT connect the interface  the telephone network by keeping the power  cable yet. cord connected to your machine when you  connect it to a telephone line. Similarly, you  can protect yourself when you want to move  a Connect the AC power cord to
                    
                    ملخص المحتوى في الصفحة رقم 7 
                    
                        Note Choose your language  If you are sharing one telephone line with an  (if needed) external telephone answering machine, connect it  5 as shown below. Before you connect the external telephone  a Press Menu, 0, 0. answering machine, remove the protective capa  from the EXT. jack on the machine. b Press a or b to choose your language. Press OK. c Press Stop/Exit. 1 Set the receive mode to External TAD if  you have an external answering machine.  See Choose the correct Receive  Mode on page 8. 
                    
                    ملخص المحتوى في الصفحة رقم 8 
                    
                        Choose the correct Receive Mode 6 The correct Receive Mode is determined by the external devices and telephone subscriber services (Voice Mail,  Distinctive Ring, etc.) you have (or will be using) on the same line as the Brother machine. Will you be using a Distinctive Ring number for receiving faxes? Brother uses the term “Distinctive Ring” but telephone companies may have other names for this service such  as Custom Ringing, RingMaster, Personalized Ring, Teen Ring, Ident-A-Call, and Smart Rin
                    
                    ملخص المحتوى في الصفحة رقم 9 
                    
                        d Enter the two digits for the day on the dial pad,  and then press OK. Set the LCD contrast  (if needed) 7 Date&Time Day:25 If you are having difficulty reading the LCD, try  (e.g. Enter 2, 5 for 25th.) changing the contrast setting. e Enter the time in 24-hour format on the dial  pad, and then press OK. a Press Menu, 1, 5. Date&Time b Press c to increase the contrast. Time:15:25 —OR— (e.g. Enter 1, 5, 2, 5 for 3:25 P.M.) Press d to decrease the contrast. Press OK. f Press Stop/Exit. c Press St
                    
                    ملخص المحتوى في الصفحة رقم 10 
                    
                        Press One Two Three Four Five  Set your Station ID key time times times times times 2 AB C 2 A 9 3 DE F 3 D 4 GH I 4 G The machine displays the date and time, and if you  set up the Station ID, it will add it to each fax you send. 5 JK L 5 J 6 MN O 6 M a Press Menu, 0, 3. 7 PQ R S 7 8 TU V 8 T b Enter your fax number (up to 20 digits) on the  dial pad, and then press OK. 9 WX Y Z 9 Station ID For more details, see Entering text in the  Basic User’s Guide. Fax: c Enter your telephone number (up t
                    
                    ملخص المحتوى في الصفحة رقم 11 
                    
                        Fax Transmission Report Dial Prefix 10 13 Your Brother machine is equipped with a The dial prefix setting will automatically dial a  Transmission Verification Report that can be used as predefined number before every fax number you dial.  confirmation that you sent a fax. This report lists the For example: If your phone system requires a 9 to dial  name or fax number of the receiving party, the date, an outside number this setting will automatically dial 9  time, and duration of the transmission
                    
                    ملخص المحتوى في الصفحة رقم 12 
                    
                        Send in the Product  Automatic Daylight  Registration and Test  Savings Time 14 15 Sheet (USA only) You can also register your product online using the  You can set the machine to change automatically for  On-Line Registration link from the installation  daylight savings time. It will reset itself forward one  CD-ROM or visit  hour in the Spring and backward one hour in the Fall. http://www.brother.com/registration/. a Press Menu, 0, 2, 2. a Fill out the Product Registration and Test  b Press a 
                    
                    ملخص المحتوى في الصفحة رقم 13 
                    
                        ® ® ®  Windows Macintosh Windows Macintosh Windows Macintosh USB Wired Network Wireless Network Choose your connection type 16 ® ® ® These installation instructions are for Windows 2000 Professional, Windows XP Home/Windows XP  ® ® ® Professional, Windows XP Professional x64 Edition, Windows Vista , Windows 7, and Mac OS X (versions  10.4.11, 10.5.x and 10.6.x). Note ® For Windows Server 2003/2003 x64 Edition/2008/2008 R2, visit your model page at  http://solutions.brother.com/. For USB Interfac
                    
                    ملخص المحتوى في الصفحة رقم 14 
                    
                        ® USB Windows For USB Interface Users  ® ® ® (Windows 2000 Professional/XP/XP Professional x64 Edition/Windows Vista /Windows 7) Before you install Install MFL-Pro Suite 17 18 a Make sure that your computer is ON and you a Put the installation CD-ROM into your  are logged on with Administrator rights. CD-ROM drive. If the model name screen  appears, choose your machine. If the language  screen appears, choose your language.  IMPORTANT • If there are any programs running, close  Note them. If the
                    
                    ملخص المحتوى في الصفحة رقم 15 
                    
                        ®  Windows Macintosh USB ® USB Windows e Connect the USB cable to the USB connector  marked with the  symbol on your machine  and then connect the cable to your computer. f Turn the machine on, and follow the on-screen  instructions to complete setup.  IMPORTANT DO NOT cancel any of the screens during the  installation. It may take a few seconds for all  screens to appear. Note ® ® • For Windows Vista and Windows 7 users,  when the Windows Security screen appears,  click the check box and click 
                    
                    ملخص المحتوى في الصفحة رقم 16 
                    
                        USB Macintosh For USB Interface Users (Mac OS X 10.4.11 - 10.6.x) Before you install Install MFL-Pro Suite 17 18 a Make sure your machine is connected to the a Put the installation CD-ROM into your  power and your Macintosh is ON. You must be CD-ROM drive. logged on with Administrator rights. b Double-click the Start Here OSX icon. Follow  the on-screen instructions.  IMPORTANT For Mac OS X 10.4.10 users, upgrade to  Mac OS X 10.4.11 - 10.6.x. (For the latest  drivers and information on the Mac 
                    
                    ملخص المحتوى في الصفحة رقم 17 
                    
                        ®  Windows Macintosh USB USB Macintosh Download and install  Presto! PageManager 19 When Presto! PageManager is installed OCR  capability is added to Brother ControlCenter2. You  can easily scan, share and organize photos and  documents using Presto! PageManager. On the Brother Support screen, click  Presto! PageManager and follow the on-screen  instructions. The installation is now  Finish complete. 17                                                                                              
                    
                    ملخص المحتوى في الصفحة رقم 18 
                    
                        ® Wired Network Windows For Wired Network Interface Users  ® ® ® (Windows 2000 Professional/XP/XP Professional x64 Edition/Windows Vista /Windows 7) c Connect the network interface cable to the LAN  Before you install connector and then connect it to a free port on  your hub. 17 a Make sure that your computer is ON and you  are logged on with Administrator rights.  IMPORTANT • If there are any programs running, close  them. • The screens may differ depending on your  operating system. d Make sur
                    
                    ملخص المحتوى في الصفحة رقم 19 
                    
                        ®  Windows Macintosh Wired Network ® Wired Network Windows Note Note • If the installation does not continue • If your machine is not found over the network,  automatically, open the top menu again by confirm your settings by following the on-screen  ejecting and then reinserting the CD-ROM or instructions. double-click the start.exe program from the  • You can find your machine’s IP address and the  root folder, and continue from step b to install  node name by printing out the Network  MFL-Pro
                    
                    ملخص المحتوى في الصفحة رقم 20 
                    
                        ® Wired Network Windows Install MFL-Pro Suite on  additional computers  19 (if needed) If you want to use your machine with multiple  computers on the network, install MFL-Pro Suite on  each computer. Go to step18 on page 18. Note ® Network license (Windows ) This product includes a PC license for up to  5 users. This license supports the installation of  the MFL-Pro Suite including ScanSoft™  PaperPort™ 12SE or ScanSoft™ PaperPort™  11SE on up to 5 PCs on the network. If you want  to use more t