Inhaltszusammenfassung zur Seite Nr. 1
Quick Start Guide
Quick Start Guide
Please read this guide before operating this scanner. After you finish reading this guide,
store it in a safe place for future reference.
Table of Contents
Safety Precautions.............................. 1 Using the Scanner Buttons................. 9
Package Contents............................... 3 Scanning with MP Navigator EX......... 10
Installing the Software......................... 4 Scanning Film ..................................... 11
Preparing the
Inhaltszusammenfassung zur Seite Nr. 2
FCC Notice (U.S.A. Only) Model Number : K10337 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov
Inhaltszusammenfassung zur Seite Nr. 3
Safety Precautions Safety Precautions Please read and take note of the following precautions before using the scanner and accessories. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the scanner safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons or damage to property if not performed correctly. In order to use the scanner safe
Inhaltszusammenfassung zur Seite Nr. 4
Safety Precautions General Handling Precautions WARNING • Do not take apart or modify the scanner and supplies. Fire or electrical shock may result from improper handling of its components. • If you hear unusual noises, see smoke, feel excessive heat or smell anything unusual, immediately unplug the USB cable and contact your retailer or Canon Customer Support Help Desk. Continued use may result in fires or electrical shock. • Do not use flammable sprays near the scanner. Do not spill water o
Inhaltszusammenfassung zur Seite Nr. 5
Package Contents Package Contents Scanner and Accessories Scanner USB Cable Film Guide Film Adapter Unit (for 35mm film strip) Documentation • Quick Start Guide (this document) • Additional Documents Setup CD-ROM • Software Programs - ScanGear (scanner driver) - MP Navigator EX (utility software) - Solution Menu (menu panel software) - ArcSoft PhotoStudio (image editing software) • On-screen Manuals - Scanning Guide (for ScanGear, MP Navigator EX, and troubleshooting) - Manuals for bundled appl
Inhaltszusammenfassung zur Seite Nr. 6
Installing the Software Installing the Software • Do NOT connect the scanner to a computer before installing the software. If you connect the scanner and the Found New Hardware screen appears, unplug the USB cable from the computer and click Cancel. The screen may close automatically when the USB cable is unplugged. • Quit all running applications before installation. • To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon scanner. • Log in as an admini
Inhaltszusammenfassung zur Seite Nr. 7
Installing the Software 4 Click Easy Install on the main menu. 5 Click Install to start installation. Carefully read the License Agreement, and then click Yes to proceed. For Macintosh, skip step 6 and go to step 7. 6 For Windows, carefully read the Please Allow All Install Wizard Processes screen, and then click Next. 7 Follow the on-screen instructions to perform the installation. 8 For users in the U.S.A., when the User Registration screen appears, follow the on-screen instructions to en
Inhaltszusammenfassung zur Seite Nr. 8
Installing the Software 9 For Windows, when the Extended Survey Program screen appears, confirm it. If you can agree, click Agree. 10 When the installation is complete, click Restart to restart your computer. For Windows: After restarting the computer, Solution Menu will appear. For Macintosh: After restarting the computer, Solution Menu icon will be registered in the Dock. You can select either MP Navigator EX, the Scanning Guide (on-screen manual), or the Online Registrati
Inhaltszusammenfassung zur Seite Nr. 9
Preparing the Scanner Preparing the Scanner Unlocking the Scanner 1 Peel the shipping tapes off the scanner. 2 Slide the lock switch on the bottom of the scanner toward the unlock mark ( ). Unlock Mark • Handle the scanner with both hands. Be careful not to drop the scanner. • When you carry or transport the scanner, make sure to slide the lock switch toward the lock mark ( ) to fasten the scanning unit. Connecting the Scanner 1 Connect the scanner to your computer with the supplied USB cable.
Inhaltszusammenfassung zur Seite Nr. 10
Try Scanning Try Scanning This section explains the basic scanning procedures using MP Navigator EX. 1 Place a color photo document with the side to Top be scanned facing down on the document glass at least 1 cm (0.4 in.) away from the edges of the document glass, and then close Bottom the document cover. 2 Start MP Navigator EX. For Windows: Double-click the Canon Solution Menu icon, then click Scan/import photos or documents. For Macintosh: Click the Solution Menu icon in the Dock, then c
Inhaltszusammenfassung zur Seite Nr. 11
Using the Scanner Buttons Using the Scanner Buttons Scanner buttons allow you to copy, scan, e-mail, and save scanned images in PDF format with a press of a button. Simply place your document on the scanner, and then press the scanner button for the required function. For more information, see the on-screen manual: Scanning Guide. COPY Button SCAN Button Prints (copies) the scanned image with a Discriminates the document type printer. automatically, then scans and saves it with appropriate
Inhaltszusammenfassung zur Seite Nr. 12
Scanning with MP Navigator EX Scanning with MP Navigator EX MP Navigator EX enables you to perform various tasks, such as compositing images, scanning with the scanner driver (ScanGear), and correcting/editing scanned images, as well as simply scanning. Starting MP Navigator EX 1 Click Scan/import photos or documents in the Solution Menu. You can also start it by following procedure. For Windows: Select Start – (All) Programs – Canon Utilities – MP Navigator EX 2.1, and click MP Navigator EX 2.
Inhaltszusammenfassung zur Seite Nr. 13
Scanning Film Scanning Film This scanner can scan 35 mm film strip one frame at a time. Follow the procedure below when scanning film. • Do not connect other than the accompanying Film Adapter Unit to the FAU connector. Use of other units may lead to malfunctions of the connected unit and the scanner. • Do not touch the metallic parts of the FAU connector. • Clean the document glass before placing the Film Guide on it, otherwise dirt and dust can affect image quality or damage the film. 1 Atta
Inhaltszusammenfassung zur Seite Nr. 14
Scanning Film 4 Gently close the document cover. 5 Start MP Navigator EX. Follow the step 2 in "Try Scanning" on page 8. 6 Click Film. 7 Click Scan. 8 Click OK on the calibration message window. Do not move the scanner while it is operating. 9 When the scanning message window appears, open the document cover, remove the Film Adapter Unit, and then attach the cap to the unit. 12
Inhaltszusammenfassung zur Seite Nr. 15
Scanning Film Guidelines 10 Place the film in the Film Guide. Place the film face up in the Film Guide (images and words should read correctly from above) with the spaces between frames aligned with the guidelines on the guide. 11 Remove the cap from the Film Adapter Unit and gently set the unit over the frame you wish to scan. Align the tab on the Film Adapter Unit with the Film Guide. Do not move the Film Adapter Unit once it has been placed on the Film Guide. Sliding it may scratch th
Inhaltszusammenfassung zur Seite Nr. 16
Scanning Film 16 Click Save to save the image and close MP Navigator EX. • After the scanning is finished, remove the Film Adapter Unit, and then attach the cap to the unit. Remove the film and the Film Guide from the document glass. • Do not leave the film strip in the Film Guide for an extended period of time as heat from the unit may damage the film. • For more information on scanning film, see "Scanning Film" in the on-screen manual: Scanning Guide. 14
Inhaltszusammenfassung zur Seite Nr. 17
Positioning the Scanner Positioning the Scanner Horizontal Position The document cover fully opens to allow easy scanning of large or bound documents. An oversized document can be scanned section by section into a single image using the stitch-assist function of MP Navigator EX. For details, see the on-screen manual: Scanning Guide. Hold the document cover with one hand, and press and hold at the base hinge as you carefully lower the cover all the way down. Alignment Mark Do not place items tha
Inhaltszusammenfassung zur Seite Nr. 18
Specifications Specifications CanoScan LiDE 700F Scanner Type Flatbed Sensor Type CIS (Color Contact Image Sensor) Light Source 3-color (RGB) LED *1 *2 Optical Resolution 9600 x 9600 dpi Selectable Resolution 25-19200 dpi (ScanGear) 48 bit input (16 bit input for each color (RGB)) Color 48 bit or 24 bit output (16 bit or 8 bit output for each color (RGB)) Scanning Bit Depth *3 Grayscale 16 bit input / 16 bit or 8 bit output 33.5 msec./line (4800 dpi), 33.8 msec./line (2400 dpi), Color 8.6 mse
Inhaltszusammenfassung zur Seite Nr. 19
Quick Start Guide Quick Start Guide Please read this guide before operating this scanner. After you finish reading this guide, store it in a safe place for future reference. Table of Contents Safety Precautions.............................. 1 Using the Scanner Buttons................. 9 Package Contents............................... 3 Scanning with MP Navigator EX......... 10 Installing the Software......................... 4 Scanning Film ..................................... 11 Preparing the
