Inhaltszusammenfassung zur Seite Nr. 1
Warning! Table of Contents
THE CLARION VS735 DIGITAL MEDIA PLAYER IS DE- 1. Introduction....................................................................2
SIGNED TO ENABLE VIEWING OF DVD OR CD-VIDEO
RECORDINGS ONLY FOR REAR-SEAT OCCUPANTS.
2. Care and Maintenance ..................................................3
DIGITAL VIDEO PRODUCTS ARE NOT INTENDED FOR
3. Discs Played by the VS735 ........................................... 4
VIEWING BY THE DRIVER WHILE THE VEHICLE IS IN
MOTION. SUCH USE
Inhaltszusammenfassung zur Seite Nr. 2
Note: 1. INTRODUCTION • The VS735 is designed to be a component in a full audio/video system. If you have any questions about compatible components, such as system controllers, monitors, FM modulators, or other audio/ The Clarion VS735 is a full-featured Digital Media Player video products, please contact your authorized Clarion dealer. designed specifically for the mobile environment. It is intended for use with other Clarion multimedia products, and can also Accessories Supplied with the VS735
Inhaltszusammenfassung zur Seite Nr. 3
and the double-D symbol are trademarks of Dolby Laborato- ries. 2. CARE AND MAINTENANCE FCC Approval Handling Discs This equipment has been tested and found to comply with the Always handle a disc by its edges. Never touch the surface of limits for a Class B digital device, pursuant to Part 15 of the the disc directly. To remove inadvertent fingerprints and dust, FCC Rules. These limits are designed to provide reasonable use a soft cloth and wipe in a straight line from the center of protection
Inhaltszusammenfassung zur Seite Nr. 4
lubricate the rotating parts. 3. DISCS PLAYED BY THE VS735 Do not attempt to open the unit, the detachable control panel, or the remote control. The internal parts are not serviceable by the user. Opening any of the components will void the Discs Compatible with the VS735 warranty. THE VS735 IS A CLASS I LASER PRODUCT, USING A LASER WHICH COULD CAUSE HAZARDOUS DVD, Video CD (VCD), CD/CD-R, and MP3 discs are compat- RADIATION EXPOSURE IF IMPROPERLY DISASSEMBLED. ible with the VS735. The identifyi
Inhaltszusammenfassung zur Seite Nr. 5
the DVD disc does not correspond to the Region number of this player (Region 1), this player will not be able to play the 4. USING THE VS735 DVD disc. Some DVD discs are manufactured to operate in “all” zones, and those discs are compatible with the VS735. In order to operate the VS735, the vehicle ignition key switch must be in the ACC or RUN position. Region Identification Markers: ACC or engine 1 ON position 4 ALL 1 6 WARNING! Discs Incompatible with the VS735 To prevent
Inhaltszusammenfassung zur Seite Nr. 6
The [POWER] button turns the VS735 on and off. When the Reset button ignition switch is in the ACC or RUN positions, this button is Security Disc loading illuminated red. The [POWER] button on the remote can also LED slot be used. The IR Receiver detects the signals from the included infrared DCP release button remote control. Aim the remote control at the IR receiver Eject button (on back of DCP) (on back of DCP) during use. Once the face is lowered, insert discs by placing them into Functio
Inhaltszusammenfassung zur Seite Nr. 7
Detaching the DCP The Detachable Control Panel (DCP) To detach the DCP: The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks - store it 1 Press the [OPEN] button. The DCP will deploy outward. immediately in the included storage case. Be careful not to damage it by pressing on it with hard objects. If the DCP becomes dirty, wipe off the dirt with a soft, dry cloth only. Other precautions when handling the DCP: • Do not drop the DCP
Inhaltszusammenfassung zur Seite Nr. 8
3 When the DCP is removed, the security LED will flash red. Reattaching the DCP Fold the hinged DCP tray into the main body. A ‘click’ will be heard. Holding the DCP by its edges, press the DCP into the hinged DCP tray on the front panel of the VS735. A 'click' should be Security LED heard when the DCP is properly attached. 4 For safekeeping, store the DCP immediately in the supplied protective case. Note: • If the DCP fails to lock into position properly, some control buttons Protective Case ma
Inhaltszusammenfassung zur Seite Nr. 9
1 Power 5. THE REMOTE CONTROL Switches the VS735 on and off. 2 0-9 Numeric keys Used with various functions. 3 ILL/GOTO Illumination/Goto Adjusts front-panel display brightness when the disc is in STOP mode. Enables direct access to a defined point within a track or chapter during playback. 4 Stop Press to stop playback. 5 / Fast reverse/fast forward Use for high-speed search within a chapter or track. Moves the cursor left and right within a menu. 6 / Next/Previous Steps to the next or previou
Inhaltszusammenfassung zur Seite Nr. 10
11 REPEAT Using the Remote Control Selects among the three repeat modes: 1, all, and off. Aim the remote control towards the IR receiver on the front 12 Play/Pause panel, as shown. The remote control can operate at a 30- Begins and pauses playback. degree angle from the front of the unit. 13 A/V A/V Input Switches between the internal disc player and the auxiliary audio/video input. IR Receiver 14 ENTER Used to select a highlighted menu item. 15 AUDIO Accesses the variou
Inhaltszusammenfassung zur Seite Nr. 11
6. DVD/VCD/CD-AUDIO PLAYBACK negative poles of the batteries are positioned as shown inside the battery compartment. Inserting a DVD/VCD/CD + 1 Turn the vehicle’s ignition key to the ACC position. - ACC or engine ON position - + + 2 Press the [POWER] button . - [OPEN] button front-panel display - + 3 Slide the battery compartment closed . [POWER] IR receiver button 2 Press [OPEN] so that the front cover opens slowly forward. VS735 11
Inhaltszusammenfassung zur Seite Nr. 12
3 Holding the disc by its edges, gently insert the disc label- Removing a Disc side up into the loading slot until the power-loading 1 Press [OPEN]. Let the panel fully fold down, then press the mechanism pulls the disc in. [ ] eject button to eject the disc. Disc loading slot 4 Gently close the front panel by pressing it back into place. Eject button You will hear a “click” when the front panel is properly secured in the closed position. 2 Remove the disc and close the detachable control pane
Inhaltszusammenfassung zur Seite Nr. 13
chapter will be selected. Disc Playback Moving to the Previous Track or Chapter DVD playback will often begin automatically when the disc is inserted. With some DVD discs, you will need to press Press the [ ] button during playback. The first time this button [ENTER] or [ ] to begin playback. is pressed, playback of the current track or chapter will restart from the beginning. Pressing this button again will cause the CD-Audio discs will begin playback automatically. previous track or chapter to
Inhaltszusammenfassung zur Seite Nr. 14
Repeat Mode GOTO Mode Press the [REPEAT] button to select from the following repeat During DVD playback, pressing the [ILL/GOTO] button once modes: allows direct input of the chapter you wish to directly access. Pressing it twice allows you to enter the elapsed time of the Repeat 1 - Repeat - Repeat Off. scene that you wish to directly access (within the current chapter). With DVD playback, pressing the [REPEAT] button once causes the current chapter to be replayed. Pressing it twice During CD p
Inhaltszusammenfassung zur Seite Nr. 15
Parental Control Screen A: In order for the film to play, the viewer must press The Parental Control feature allows authorized users to Setup and change the Parental Control setting using the select an upper limit to film ratings that can be played by the password. See “Setup”, in section 9, for more information. VS735. The factory default setting for this feature is off, and the default password for managing this feature is 3308. To Screen B: In order for the film to play, use the navigation a
Inhaltszusammenfassung zur Seite Nr. 16
7. MP3 PLAYBACK ON CD-R DISCS - - SMART NAVI - - ROOT ROOT 0 MP3 (ARTIST NAME) 1 What is MP3? MP3 (ARTIST NAME) 2 MP3 (ARTIST NAME) 3 MP3 is an audio compression method. This audio compres- sion method has become a standard format with many PC users. MP3 allows the original digital audio data to be ARTIST NAME - SONG TITLE compressed to about 10 percent of its initial file size while still retaining high sound quality. This means that about 10 music CDs can be re
Inhaltszusammenfassung zur Seite Nr. 17
31 files in each folder. File tracks are played in the order that MP3 format) they were recorded onto a disc. (Files might not always be played in the order displayed on the PC.) • Joliet (a version of ISO9660 that supports longer filenames) Sound Quality • Romeo (a format used by some CD-creating software) Some noise might be audible—this depends on the type of File Extensions encoder software used while recording. It is not noise created Always add a file extension “ .MP3” or “.mp3” to an M
Inhaltszusammenfassung zur Seite Nr. 18
• Use a soft, dry cloth to clean the case. Never use a rough 8. INSTALLATION AND WIRING cloth, thinner, benzene, alcohol, or other solvent. For tough dirt, apply a small amount of cold or warm water to a soft cloth and gently wipe. 1. Before Starting 2. Package Contents Read these instructions and the following precautions care- fully. 1 VS735R disc unit 2 DCP Case WARNING! 3 IR Remote control Be sure to disconnect the battery (-) 4 (2) AAA Alkaline Batteries (for remote control) terminal before
Inhaltszusammenfassung zur Seite Nr. 19
3. Installation Requirements 4. Installing the VS735 Installing into a Universal In-Dash Mount (using the DIN 1 Install the unit within 30 degrees of the horizontal plane. sleeve) First, verify that the opening you will be mounting the VS735 into will accommodate the mounting sleeve. Max. 30˚ Sleeve opening dimensions 7-3/16" (182 mm) 2 Use the enclosed screws for installation. Using other screws can cause damage and void the warranty. Hole Chassis Chassis Note: Damage • Some car models require
Inhaltszusammenfassung zur Seite Nr. 20
Installing into the Universal In-Dash Mount Sleeve Removing the VS735 from the Universal In-Dash Mount Rear fastening hole of vehicle, Note: or backstrap Instrument panel • This requires you to have the original release tools provided with the Hole VS735. Keep these tools in a safe place, not in the vehicle. 1 Remove the rear nut from the backstrap. Tabs 2 Remove the trim ring. 3 Insert the removal tools as shown, until a ‘click’ is heard. Nut and washer Pull gently and evenly on both the left a
