Inhaltszusammenfassung zur Seite Nr. 1
DXZ958RMC
Owner’s manual
Mode d’emploi
Bedienungsnleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Manual de instrucciones
Bruksanvisning
Manual de instalação
DXZ958RMC
CD/MP3/WMA Receiver /
CeNET & Touch Panel Control /
Music Catcher
Récepteur CD/MP3/WMA/CeNET et écran de contrôle
tactile/Music Catcher
CD/MP3/WMA-Receiver /CeNET & Touch Panel Bedienfeld /
Music Catcher
Lettore CD/MP3/WMA / Comando pannello a tocco CeNET
con Music Catcher
CD/MP3/WMA Ontvanger /CeNET &
Aanraakbedieningspaneel /Mus
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this unit. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, DAB and TV tuner connected via the CeNET cable. The CD changer and TV tuner have their own manuals, but no explanations for o
Inhaltszusammenfassung zur Seite Nr. 3
English Contents 1. PRECAUTIONS ............................................................................................................................. . 3 Sloping Console .............................................................................................................................. 4 Handling Compact Discs ................................................................................................................ 4 2. CONTROLS ...........................................
Inhaltszusammenfassung zur Seite Nr. 4
English Sloping Console This unit uses a SLOPING CONSOLE to make 2. Before the SLOPING CONSOLE closes, large screen displays possible. there may be a braking sound from the safety mechanism. This is normal. When you use the SLOPING CONSOLE, be sure to close it. 3. If you move the SLOPING CONSOLE by hand, this may start play. To correct this play, with the power for the unit ON, press the [Q Q Q Q Q] CAUTION button to close the SLOPING CONSOLE. 4. After a disc is ejected, the SLOPING BE CAREFUL
Inhaltszusammenfassung zur Seite Nr. 5
English 2. CONTROLS Main unit [ADJ] [Q] (OPEN/EJECT) Photo Sensor IR-Receiver [MODE] [ ] ROTARY [ ] (SOUND) [SRC] [TA] Display With the SLOPING CONSOLE opened [CD SLOT] DCP Detaching Slider DXZ958RMC 5 +DXZ958RMC_01-02-Eng.p65 5 05.1.20, 19:28 280-8180-00
Inhaltszusammenfassung zur Seite Nr. 6
English 3. NOMENCLATURE Names of the Buttons and their Functions IR-Receiver DCP Detaching Slider • Receiver for remote control unit. (Operating • Removes the DCP. range: 30° in all directions) Display [ADJ] button • Displays the various information that indicates • Use this button to set or adjust the various the operating state of this unit such as tuning/ settings in the adjust mode. play state and indicators. •You can operate the display by touching or [Q] (OPEN/EJECT) button touching the s
Inhaltszusammenfassung zur Seite Nr. 7
English Operations when External Equipment is Connected to this Unit ●When the CD/DVD changer is connected ∗ For details, see the section “CD changer operations” (cf. page 53). For the DVD changer, refer to the Owner’s Manual provided with the DVD changer. ●When the TV/DAB is connected ∗ For details, see the section “TV operations” (cf. page 56) or “Digital Radio/DAB operations” (cf. page 59). DXZ958RMC 7 +DXZ958RMC_01-02-Eng.p65 7 05.1.20, 19:28 280-8180-00
Inhaltszusammenfassung zur Seite Nr. 8
English Touch Panel Buttons ●Standard operation display ●Simple operation display (To switch to the simple operation display, press Left slide Right slide and hold the [MODE] button for 2 seconds or button button longer.) Left button Right button 98.10 FM1 P3 P.CH SEEK 2:45 CT PRESET BAND PS/AS DISP FM1 SEEK P.CH CT 2:45 98.10 P3 Sub buttons PRESET BAND PS/AS DISP Sub buttons Left slide button •Touch this button for seek up/down or track up/ down operations. Left button •Touch and hold this but
Inhaltszusammenfassung zur Seite Nr. 9
English Touch Panel Operations A touch panel display is used as the display on Touch this unit. You can operate this display just by Touch the display with your fingertip, and move touching it with your fingertip. There are four your finger to the up ( ) or down ( ) with your main display operations as follows: fingertip still touching the display, and keep your fingertip on the display. The current operation Touch continues for the time your fingertip is held on Touch the display with your f
Inhaltszusammenfassung zur Seite Nr. 10
English 4. DCP The control panel can be detached to prevent Attaching the DCP theft. When detaching the control panel, store it 1. Place the DCP to the SLOPING CONSOLE, in the DCP (DETACHABLE CONTROL PANEL) adjusting the metal connecters on DCP and case to prevent scratches. the SLOPING CONSOLE. We recommend taking the DCP with you when 2. Press the DCP until it clicks into the leaving the car. SLOPING CONSOLE. Removing the DCP 1. Turn off the power. 2. Press the [Q] button to open the DCP. 3. M
Inhaltszusammenfassung zur Seite Nr. 11
English 5 2 0 2 5. REMOTE CONTROL Receiver for remote control unit Operating range : 30° in all directions Signal transmitter Remote control unit [ ] SRC [ ] BND [ ] [ ], [ ] [a], [d] [MUTE] [ ] DISP [TA] [ ] PTY [PS/AS] [AF] Inserting the Battery 1. Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. 2. Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards. 1 3. Press the battery in t
Inhaltszusammenfassung zur Seite Nr. 12
English Functions of the Remote Control Unit Buttons Mode CD/MP3/WMA/ CD changer Radio (RDS)/DAB TV M.CATCHER DVD changer Button Switches among radio, DAB tuner, CD/MP3/WMA, MC, CD changer, DVD changer, TV and [SRC] AUX. Switches reception Returns to the first Moves the next disc Switches reception [BND] band. track. in increasing order. band. Increases and decreases volume (in all modes). [ ] , [ ] Moves preset Moves tracks up and down. [ ] , [ ] Moves preset channels up
Inhaltszusammenfassung zur Seite Nr. 13
English 6. OPERATIONS Basic Operations Speaker system CAUTION Speaker System Speaker Configuration Be sure to lower the volume before 3 WAY High 2ch Mid 2ch Subwoofer 2ch switching the unit off or the ignition key. The unit remembers its last volume setting. If you 2 WAY High 2ch Mid 2ch Rear 2ch switch the power OFF with the volume up, Dolby PL II 5.1ch Front 2ch Surround 2ch Center + Subwoofer when you switch the power back ON, the NORMAL Front 2ch Rear 2ch Subwoofer 2ch sudden loud volume ma
Inhaltszusammenfassung zur Seite Nr. 14
English Basic Operations Selecting a speaker system CODEMATIC function When “CODEMATIC” is set to “ON”, and the When this product is turned on for the first time, power is turned ON with the DCP attached, the it allows you to select a speaker system. Touch Code display appears. Touch the display Choose your system in “SPEAKER SELECT” in the order that was set in the adjust mode. screen by following the procedure below. ADJ SETTING 1. Touch the speaker system best suited to your car. CODEMATI
Inhaltszusammenfassung zur Seite Nr. 15
English Basic Operations Descriptions given in this manual are mainly for 2. Touch [COLOR]. the standard operation display. For descriptions DISPLAY EDIT for operations in the simple operation display, << P 05 refer to the descriptions for the screen displays BGV TITLE D-BLUE AUTO in the radio mode or the CD mode. SP/ANA COLOR SCROLL RTN ∗ The [COLOR] is displayed only when you choose wallpaper from P05 to P12. Switching the background 3. Touch on the left of the display to 1. Touch [DISP]. sel
Inhaltszusammenfassung zur Seite Nr. 16
English Basic Operations 4. Touch [SENS] to select the sensitivity. ●CD mode (MP3/WMA) DISPLAY EDIT Folder title (when using a folder) ➜ Play list (when using a play list) ➜ Track title P 05 1 BGV SPE/ANA ➜ Album TAG ➜ Artist TAG ➜ Title TAG ➜ D-BLUE LOW TITLE COLOR SENS RTN Folder title (when using a folder)... ●MUSIC CATHCHER mode •You can choose from [HIGH], [MID], or [LOW]. Folder title ➜ Track title ➜ Folder title... 5. Touch [RTN]. Notes: • MP3 supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. •T
Inhaltszusammenfassung zur Seite Nr. 17
English Radio Operations BAND Screen displays in the radio Touching this switches the reception band. mode Touching and holding this for 1 second or longer switches between the manual tuning mode and ● Standard operation display the seek tuning mode. The standard operation display appears by pressing the [SRC] button and selecting the PS/AS radio mode. Touching this starts a preset scan. Preset No. Touching and holding this for 2 seconds or Title display display longer starts an auto store. Rece
Inhaltszusammenfassung zur Seite Nr. 18
English Radio Operations 1. Touch [BAND] to select the desired band 1. Touch [PRESET]. (FM or AM (MW, LW)). The preset memory No. list is displayed. 2. Tune into a station. 2. Touch the preset memory No. ∗ If "MANU" is displayed, touch and hold ∗ In the standard operation display, preset [BAND] for 1 second or longer. No. can also be tuned by touching . Automatic tuning is possible when "SEEK" ■ To cancel tuning is displayed. ∗ If “TA” is lit in the display, TP stations are 1. Touch [RTN]. autom
Inhaltszusammenfassung zur Seite Nr. 19
English Radio Operations Preset scan Preset scan is a function for receiving stations in the order that they are currently stored to preset No. so that broadcasts can be checked. 1. Touch [PS/AS]. “P-SCAN” is displayed. ∗ The currently stored stations are received in order for 7 seconds or longer each. Stations with poor reception are skipped, and the next station is received. ■ To cancel preset scan 1. Touch [PS/AS]. “P-SCAN” display disappears and the stations that were being received when [P
Inhaltszusammenfassung zur Seite Nr. 20
English RDS Operations RDS (Radio Data System) AF function This unit has a built-in RDS decoder system that The AF function switches to a different supports broadcast stations transmitting RDS frequency on the same network in order to data. maintain optimum reception. This system can display the name of the • The factory default setting is “ON”. broadcast station being received (PS), and can • When the AF function is ON, “AF” blinks in the automatically switch to the broadcast station display. w
