Inhaltszusammenfassung zur Seite Nr. 1
P3PC-1922-05ENZ0
fi-5530C2 Image Scanner
Operator's Guide
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS ■ Regulatory Information ......................................................... v ■ Note of Liability ................................................................... vii ■ Safety Precautions ............................................................... xi Chapter 1 BASIC SCANNER OPERATIONS...........................1 1.1 Turning the Scanner ON .................................................... 2 1.2 Placing Documents on the ADF ........................................ 6 1.3
Inhaltszusammenfassung zur Seite Nr. 3
2.8 Scanning the Image Brighter........................................... 55 2.9 Detecting Multifeeds......................................................... 57 2.10 Correcting Skew............................................................... 62 2.11 To Output Multi-Images................................................... 64 2.12 Color/Monochrome Auto Detection ............................... 67 2.13 Splitting a Page in Two Pages ........................................ 69 2.14 Removing Pun
Inhaltszusammenfassung zur Seite Nr. 4
5.4 Items to check before contacting the agent where you bought the scanner ........................................................ 117 5.5 Checking Labels on the Scanner .................................. 120 Chapter 6 DOCUMENT SPECIFICATIONS FOR ADF ........ 121 6.1 Document Size................................................................ 122 6.2 Document Quality........................................................... 123 6.3 Maximum ADF Capacity......................................
Inhaltszusammenfassung zur Seite Nr. 5
iv
Inhaltszusammenfassung zur Seite Nr. 6
INTRODUCTION Thank you for purchasing the fi-5530C2 Duplex Color Scanner. This document describes how to handle the fi-5530C2 and basic operations. Before you start using the fi- 5530C2, be sure to read this manual thoroughly to ensure correct use. This document describes the basic operation methods to perform scanning by using ScandAll PRO. The version of ScandAll PRO bundled with this product is subject to change without notice, in which case the screenshots captured in this document may d
Inhaltszusammenfassung zur Seite Nr. 7
Canadian DOC Regulations This digital apparatus does not exceed the Class B limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Le présent appareil numérique n'émet pas de parasites radioélectriques dépassant les limites applicables aux appareils numériques de la classe B et prescrites dans le Règlement sur le brouillage radioélectriqu
Inhaltszusammenfassung zur Seite Nr. 8
■Note of Liability READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS. Also, keep this manual in a safe place so that it can be easily referred to during use of this product. While all efforts have been made to ensure the accuracy of all information in this manual, PFU assumes no liability to any party for any damage caused by errors or omissions or by statements of any kind in this manual
Inhaltszusammenfassung zur Seite Nr. 9
ABBYY™ FineReader™ Engine © 2011 ABBYY. OCR by ABBYY ABBYY and FineReader are trademarks of ABBYY. Other company names and product names are the registered trademarks or trademarks of the respective companies. How Trademarks Are Indicated in This Manual Operating systems (OS) are indicated as follows: ® Windows 2000: Windows 2000 Professional operating system ® Windows XP: Windows XP Home Edition operating system ® Windows XP Professional operating system (32/64-bit) ® Windows Server 2003: Wind
Inhaltszusammenfassung zur Seite Nr. 10
About Maintenance The user must not perform repairs on this scanner. Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this product. Warning Indications Used in This Manual This indication alerts operators to an operation that, if not strictly observed, may result in severe injury or death. This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or dama
Inhaltszusammenfassung zur Seite Nr. 11
Warning Label The glass surface inside the ADF becomes hot during the operation. Be careful not to touch the glass surface inside the ADF. Do NOT remove from the scanner, stain or scratch the warning labels. ATTENTION Screen Examples In This Manual The screen examples in this manual are subject to change without notice in the interest of product improvement. If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen whil
Inhaltszusammenfassung zur Seite Nr. 12
■Safety Precautions In the following warnings, "power cable" may refer to the AC cable connected to the AC adapter collectively. Do not damage the AC cable. A damaged AC cable may cause fire or electric shock. Be careful of the following when handling the power cable: • Do not moisten, modify, tie, bundle, or wind the cable. • Do not place heavy objects on the cable, trap the cable in a doorway, drop or damage the cable in any other way. • Do not pull or forcibly bend or twist the cable. • D
Inhaltszusammenfassung zur Seite Nr. 13
Do not install the device in locations that has oil smoke, steam, humidity, and dust. Do not install the scanner in locations subject to oil smoke, steam, humidity, and dust. Doing so might cause a fire or electric shock. Turn the scanner OFF if it is damaged. If the scanner is damaged for any reason, disconnect immediately the power plug in order to turn out the scanner. Contact the store where you purchased the scanner. Do not put liquids inside the scanner. Do not insert or drop metal
Inhaltszusammenfassung zur Seite Nr. 14
Do not install the scanner on unstable surfaces. Make sure that the scanner is installed on a flat, level surface and that none of its parts extend beyond the surface top, such as a desk or table. Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of vibration to prevent it from falling. Install the scanner on a strong surface that will support the weight of the scanner and other devices. Do not block the ventilation ports. Do not block th
Inhaltszusammenfassung zur Seite Nr. 15
Before moving the scanner, disconnect the power plug from the power outlet. Do not move the scanner with the power and interface cables connected as this might damage the cables, causing fire, electric shock or injuries. Before moving the scanner, be sure to disconnect the power plug from the power outlet, and all other data cables. Make sure that the floor is free of any obstruction. Protect the scanner from static electricity. Install the scanner away from strong magnetic fields and other
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 1 1 BASIC SCANNER OPERATIONS This chapter describes the basic operations of the scanner. In this chapter, Windows XP screenshots are used as examples. The screens and operations may differ slightly if the operating system (OS) you are using is not Windows XP. In addition, when TWAIN is updated, the screens and operations provided in this chapter may be different from the actual ones. 1.1 Turning the Scanner ON............................................................................
Inhaltszusammenfassung zur Seite Nr. 17
1.1 Turning the Scanner ON 1. Press the power button on the operator panel. The scanner is turned on, and the green LED on the operator panel illuminates. During the initialization, the indication of the Function Number Display changes as follows: 8 P 0 1 A number "1" indicated on the operator panel shows that the scanner is in the ready status. Power button To turn the scanner off, hold the power button down for at least two HINT seconds. ■ About Power ON/OFF Control You can select how to p
Inhaltszusammenfassung zur Seite Nr. 18
BASIC SCANNER OPERATIONS 1.1 Turning the Scanner ON 3) In the [Printers and Other Hardware] window, double click the [Scanners and Cameras] icon. 1 ⇒ The [Scanners and Cameras] window appears. 4) In Windows XP and Windows Server 2003, right-click on the [fi-5530C2dj] icon, and then select [Properties]. In Windows 2000 and Windows Vista, double-click on the [fi- 5530C2dj] icon. ⇒ The [fi-5530C2dj Properties] dialog box appears. 5) Select the [Device Set] tab. fi-5530C2 Image Scanner Operator’s
Inhaltszusammenfassung zur Seite Nr. 19
⇒ The dialog box shown below appears. 2. Click the [Power Control] button ⇒ The dialog box shown below appears. 3. In this dialog box, do the following: • To power on/off the scanner by pressing the Power button: ⇒ Select [Enable power switch]. • To power on/off the scanner by connecting/disconnecting the AC cable: ⇒ Select [Disable power switch]. 4
Inhaltszusammenfassung zur Seite Nr. 20
BASIC SCANNER OPERATIONS 1.1 Turning the Scanner ON ■ Power Save Mode The Power Save mode keeps the scanner in a low-powered state if no operation is performed on the scanner for 15 minutes after it has been turned on. The scanner is automatically switched to the Power Save mode. 1 In the Power Save mode, the indication of the Function Number Display on the operator panel goes out, while the green LED is kept lit. To return the scanner from the Power Save mode, perform one of the following op
