Resumen del contenido incluido en la página 1 
                    
                        43-3548.fm  Page 1  Tuesday, February 25, 2003  1:06 PM
2.4 GHz Cordless Telephone
Caller ID/Call Waiting ID
43-3548
20-Number Memory Dialing — lets you store up to 20 numbers in memory 
for easy dialing. (See “Storing Phone Numbers and Names” on page 20.)
Ample Talk and Standby Time — 
the supplied battery (when fully 
charged) provides about 7 hours of 
talk time or 14 days of standby time.
Headset Jack — lets you connect an 
optional headset for hands-free 
convenience. (See “Using a Headset”
                    
                    Resumen del contenido incluido en la página 2 
                    
                        Important Information 43-3548.fm  Page 2  Tuesday, February 25, 2003  1:06 PM CONTENTS Important Information . 2 FCC Statement .......... 2 Surge Proection ......... 3 Important Safety  Instructions ............... 4 Battery Safety As an ENERGYSTAR Partner,  Instructions ................. 5 RadioShack Corporation has  Introduction .............. 7 determined that this product  meets the ENERGYSTAR guidelines  Installation ................ 8 for energy efficiency. Selecting a Location ... 8 Conne
                    
                    Resumen del contenido incluido en la página 3 
                    
                        43-3548.fm  Page 3  Tuesday, February 25, 2003  1:06 PM equivalence number, or REN on the back of  CONTENTS your phone. (continued) Making Calls with  If you use more than one phone or other  Memory Dialing ........ 23 device on the line, add up all of the RENs. If Chain Dialing ........... 24 Editing a Stored Name  the total is more than five (three in rural  and/or Phone  areas), your telephones might not ring. If  Number .................... 24 ringer operation is impaired, remove a Erasing a
                    
                    Resumen del contenido incluido en la página 4 
                    
                        Important Safety Instructions 43-3548.fm  Page 4  Tuesday, February 25, 2003  1:06 PM IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should  always be followed to reduce the risk of fire, electric shock and injury to  persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Never install telephone wiring during a lightning storm. 4. Never install telephone jacks in wet
                    
                    Resumen del contenido incluido en la página 5 
                    
                        43-3548.fm  Page 5  Tuesday, February 25, 2003  1:06 PM 13. Do not allow anything to rest on the power cord. Do not locate this  product where the cord will be stepped on. 14. Do not overload wall outlets and extension cords as this can result in  a risk of fire or electric shock. 15. Never push objects of any kind into this product through cabinet slots  as they may touch dangerous voltage points or short out parts that  could result in a risk of fire or electric shock. Never spill liquid of any 
                    
                    Resumen del contenido incluido en la página 6 
                    
                        Important Safety Instructions 43-3548.fm  Page 6  Tuesday, February 25, 2003  1:06 PM 1. Use only the appropriate type and size battery pack specified in the  instruction manual provided for this product. 2. Do not dispose of the battery pack in a fire. The cell may explode.  Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery pack. Released electrolyte is  corrosive and may cause damage to the eyes or skin. It may be toxic  if swallowed. 4. Ex
                    
                    Resumen del contenido incluido en la página 7 
                    
                        43-3548.fm  Page 7  Tuesday, February 25, 2003  1:06 PM INTRODUCTION Thank you for purchasing a RadioShack 2.4  GHz Cordless Telephone. Your phone uses  advanced technology to give you superior  audio quality and extended range. The  phone’s Caller ID unit records each caller’s  telephone number (and name, if available in  your area) and the date and time of the call,  as provided by your local phone company to  Caller ID service subscribers. If you  subscribe to Call Waiting with Caller ID, the
                    
                    Resumen del contenido incluido en la página 8 
                    
                        Installation 43-3548.fm  Page 8  Tuesday, February 25, 2003  1:06 PM INSTALLATION  CAUTION  Before using your phone, carefully peel the  You must use  a Class 2 protective film off the display. The film  ! power source  protects the handset window during  that supplies 9V DC and  shipment and is not necessary for use. delivers at least 210 mA.  Its center tip must be set  to positive and its plug SELECTING A LOCATION must fit the phone's DC You can place the phone’s base on a desk  IN 9V jack. T
                    
                    Resumen del contenido incluido en la página 9 
                    
                        43-3548.fm  Page 9  Tuesday, February 25, 2003  1:06 PM On a Desk Top 1. Plug one end of  the supplied long  modular cord into  the TEL LINE jack  on the back of  the base.  2. Plug the modular  cord’s other end  into a modular  phone line jack. TEL  3. Insert the  LINE DC IN 9V supplied AC  adapter’s barrel plug into the DC IN 9V  jack on the back of the base. 4. Route the adapter’s cord through the  strain relief slot on the base, then plug  the adapter into a standard AC outlet. 5. Lift the b
                    
                    Resumen del contenido incluido en la página 10 
                    
                        Installation 43-3548.fm  Page 10  Tuesday, February 25, 2003  1:06 PM 4. Plug the adapter into a standard AC  outlet. 5. Lift the base’s antenna to a vertical  position. On a Wall To mount the phone directly on a wall, you  need two screws (not supplied) with heads  that fit into the keyhole slots on the bottom  of the base. 15 1. Drill two holes 3 /16 inches (100 mm)  apart. Then thread a screw into each  1 hole, letting the heads extend about /8  inch (3 mm) from the wall. 2. Plug one end of t
                    
                    Resumen del contenido incluido en la página 11 
                    
                        43-3548.fm  Page 11  Tuesday, February 25, 2003  1:06 PM CONNECTING/CHARGING THE   IMPORTANT  ! ! BATTERY PACK The EPA  certified  The phone comes with a rechargeable  ® RBRC  nickel-cadmium battery pack in the handset,  Battery  but not connected. Before using your  Recycling  phone, you must connect the battery pack,  Seal on the nickel- then charge it for about 15–20 hours. cadmium (Ni-Cd) battery  !  indicates RadioShack is  voluntarily participating in  1. Press down and slide off the batte
                    
                    Resumen del contenido incluido en la página 12 
                    
                        Installation 43-3548.fm  Page 12  Tuesday, February 25, 2003  1:06 PM • If the base loses power for about an   IMPORTANT  ! ! hour while the handset is away from it,  Be sure the battery pack is  the security access-protection code  properly connected before  might be lost. To change the code,  you try to charge it. The  while holding PAGE, return the handset  CHARGE/IN USE indicator  to the base for about 3 seconds.  lights when the handset is  on the base, even if the  • If the battery pack be
                    
                    Resumen del contenido incluido en la página 13 
                    
                        43-3548.fm  Page 13  Tuesday, February 25, 2003  1:06 PM • The supplied battery pack should last  for about a year. If the battery pack  does not hold a charge for more than 2  hours after an overnight charge,  replace it with a new 3.6-volt, 600 mAh  battery pack with a connector that fits  the socket in the battery compartment.  You can order a replacement battery  pack through RadioShack. Install the  new battery pack and charge it for  about 15–20 hours. OPERATION MAKING AND RECEIVING  CALLS 
                    
                    Resumen del contenido incluido en la página 14 
                    
                        Operation 43-3548.fm  Page 14  Tuesday, February 25, 2003  1:06 PM Action Handset On Base Handset Off Base To  Press end or return the handset to the  hang  base (Auto Standby). up 1)Pick up the 1)Press talk/ handset. FLASH. 2)Press talk/ 2)Listen for the dial  FLASH. tone. 3)Listen for the dial 3)Press REDIAL/ tone. PAUSE. 4)Press REDIAL/ OR To  PAUSE. Press REDIAL/ redial OR PAUSE, then press  1)Pick up the talk/FLASH. handset. 2)Press REDIAL/ PAUSE, then  press talk/ FLASH. ADJUSTING THE HAND
                    
                    Resumen del contenido incluido en la página 15 
                    
                        43-3548.fm  Page 15  Tuesday, February 25, 2003  1:06 PM Temporarily Mute Ringer If the handset is off the base, simply press  the end key to temporarily mute the  incoming ring. The ringer will sound with the  next incoming call. REDIAL The REDIAL/PAUSE key redials the last  number dialed. The redialed number can be  up to 32 digits long. TONE DIALING SWITCH-OVER Some telephone companies use equipment  that requires pulse dialing (sometimes  referred to as rotary dialing).  If you need to enter
                    
                    Resumen del contenido incluido en la página 16 
                    
                        Operation 43-3548.fm  Page 16  Tuesday, February 25, 2003  1:06 PM SELECTING A DIFFERENT  CHANNEL If you encounter interference while using  your phone, you can manually change the  phone´s channel for clear operation. This  function works only when the phone is in  SSccaannnniinngg use. Press DELETE/CHANNEL. ¨SSccaannnniinngg¨  appears on the display, indicating the phone  is changing to another channel. Ô NOTE Ô  PAGE Page To locate the handset (while it’s off the  You can cancel paging by  ba
                    
                    Resumen del contenido incluido en la página 17 
                    
                        43-3548.fm  Page 17  Tuesday, February 25, 2003  1:06 PM You may need to occasionally reset the  indicator if it remains On after you have  retrieved your messages. To reset the  indicator, press and hold PAGE for 5 second. SETTING MENU OPTIONS There are five setup options available. They  are Caller ID options [Auto Talk, CIDCW  (Caller ID on Call Waiting), Area Code], Dial  Mode and Language. Auto Talk Auto Talk allows you to answer the phone  without pressing the talk/FLASH button.  If the ph
                    
                    Resumen del contenido incluido en la página 18 
                    
                        Operation 43-3548.fm  Page 18  Tuesday, February 25, 2003  1:06 PM AREA CODE Ô NOTE Ô  If you enter a 3-digit area code number in  Area Code the Area Code option, your local area code  • If your calling area  does not appear in Caller ID messages. Do  requires 10-digit dialing,  not program this option, if your calling area  do not program this  requires 10-digit dialing. When reviewing  option. Caller ID messages, you will see only the  • When the area code  local seven digit number. For calls 
                    
                    Resumen del contenido incluido en la página 19 
                    
                        43-3548.fm  Page 19  Tuesday, February 25, 2003  1:06 PM 1. When the phone is in the standby  mode, press and hold CID/MENU. 2. Press VOL d key three times to select  DDiiaall ¨DDiiaall¨. 3. Press SELECT to toggle between  TToonnee PPuullssee ¨TToonnee¨ and ¨PPuullssee¨ for each setting. 4. Press end or return the handset to the  base unit to complete the setting. The  handset returns to the standby mode. • If you are not sure of your dialing  system, set for tone dialing. Make a  trial call.  I
                    
                    Resumen del contenido incluido en la página 20 
                    
                        Operation 43-3548.fm  Page 20  Tuesday, February 25, 2003  1:06 PM Storing Phone Numbers and  Ô NOTE Ô  Names Memory Dialing allows you to dial a number  In memory dialing  operation, you must press using just a few key presses. Your cordless  a key within 30 seconds or  telephone stores up to 20 names/numbers  the phone will return to the  in the handset. Ô  standby mode. If you  return the handset to the SSeelleecctt  MMeemmoorryy 1. Press MEM, ¨SSeelleecctt  MMeemmoorryy¨ is  base, the phone