Resumen del contenido incluido en la página 1 
                    
                         
Instruction Manual 
 
 
 
 
 
 
 
ECOR Series DVR 
ECOR Series DVR                                                                                                                                                                                                                                                                                                                                                                                                                                                
                    
                    Resumen del contenido incluido en la página 2 
                    
                        E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N  ECOR Series DVR  Instruction Manual   2008 EverFocus Electronics Corp  www.everfocus.com                                All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by  any means without written permission of the Everfocus Electronics Corporation.  Release Date: Dec. 2008      QuickTime is a registered trademark of the Apple Computer, Inc.   Windows is a registered trade
                    
                    Resumen del contenido incluido en la página 3 
                    
                          Safety Precautions     • To avoid any damage, please consider the following safety warnings:  • Never place the recorder near to heaters, furnaces, other heat sources or under direct solar irradiation.   • Operate the device only in locations providing the tolerable operating temperature range  0°C~40°C/32°F ~ +104°F.   • Make sure that the device‘s ventilation slots are not covered or sheeted.  • For cleaning, make sure the device is plugged off and only use a damp cloth without acid detergen
                    
                    Resumen del contenido incluido en la página 4 
                    
                                  WEEE  This Product is RoHS compliant.          The information in this manual was current upon publication.  The manufacturer reserves the right to revise and improve his products.    Therefore, all specifications are subject to change without prior notice. Misprints reserved.   Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.                                          iiiiii  iiiiii                                    
                    
                    Resumen del contenido incluido en la página 5 
                    
                          TABLE OF CONTENTS    1 PRODUCT OVERVIEW ..................................................................................................... 1  1.1 FEATURES........................................................................................................................... 1  1.2 PACKAGE CONTENTS.......................................................................................................... 2  1.3 SPECIFICATIONS..................................................................
                    
                    Resumen del contenido incluido en la página 6 
                    
                          4.5.1 Layout Change ......................................................................................................................................23  4.5.2 Bring to Full Screen Mode ....................................................................................................................23  4.6 QUICK MENU.................................................................................................................... 24  4.6.1 Triplex Operation..............................
                    
                    Resumen del contenido incluido en la página 7 
                    
                          6.1 CONNECTING TO ECOR.................................................................................................... 63  6.2 IE BROWSER SETTING & ACTIVE X CONTROL INSTALLATION ................................................... 64  6.2.1 Installing ActiveX controls ....................................................................................................................64  6.2.2 Enabling ActiveX Controls...........................................................................
                    
                    Resumen del contenido incluido en la página 8 
                    
                          Chapter  1  1 PRODUCT OVERVIEW  The ECOR series DVR is based on MPEG-4 compression technology, resulting in enhanced recording  capacity and improved network image transmission speed with high image quality. Comprehensive  features and extended event recording settings enable the most universal application of this DVR series.   1.1 FEATURES  • Pentaplex Operation (Simultaneously live, recording, playback, archive, and remote viewing)  • User friendly GUI with graphical icons and visual indicat
                    
                    Resumen del contenido incluido en la página 9 
                    
                          1.2 PACKAGE CONTENTS  Digital Video Recorder x1  User’s Manual x1  AC Adapter and Power Cord x1  Handheld Remote Control (batteries included) x 1  Hard Drive Rack Mount x1 *  SATA Connection Cable x1 *  Pack of screws x 1 *  * marked accessories not included in some models            2                                                                                                                                                                                                                    
                    
                    Resumen del contenido incluido en la página 10 
                    
                          1.3 SPECIFICATIONS    Video Format NTSC / PAL (auto detected by system)  Operating System Embedded Linux  ECOR4: 4 x 1 V FBAS, BNC, 75 Ohm  pp Video Input  ECOR8: 8 x 1 V FBAS, BNC, 75 Ohm  pp Main monitor: 1 V FBAS, BNC at 75 Ohm  pp Video Output  1 x VGA ( res. 800x600@60 Hz)  Video Compression MPEG-4  Full screen, Picture In Picture (Live only), 4-channel, 9-channel (for 8  Video Display  CH model only)  NTSC: 704 x 480, 704 x 240 or 352 x 240  Recording Resolution  PAL: 704 x 576, 704 x 28
                    
                    Resumen del contenido incluido en la página 11 
                    
                          Playback Search Function By time / date;  by event (alarm / motion); Smart Motion Grid Search  Adjustable by channel , 22x15 sensor fields each with 10 levels  Motion Detection  sensitivity  Video Loss Detection Yes  Event Log Up to 10000 events  Event Alarm Fan failure, hard disk failure, hard disk temperature over, hard disk full  Setup Graphical On-Screen-Display  Via front panel, USB optical mouse, or IR remote control  Operation  RS-485 operation from EKB500  Real-time Clock Internal with
                    
                    Resumen del contenido incluido en la página 12 
                    
                          1.4 FRONT PANEL     Your primary interaction with your new DVR will be through the Front Panel buttons and their  corresponding buttons on the included Remote Control.  Take a moment to learn where the keys are as the  remainder of the manual will refer to them often.  8 9 10 11  2 14  15  1 3 5 6 7 12 13  4    1. USB 2.0 (front)  For connecting USB mouse or USB flash memory.   2. DVD+RW Burner  DVD+RW burner (D models only)  3. Channel Key (1~4)/(1~8)  Press channel key (CH1~CH4) / (CH1~CH8) 
                    
                    Resumen del contenido incluido en la página 13 
                    
                          6. SEQ  Press this key to enter the auto sequential switching mode. The sequence dwell time can be set in  “Display Setting” tab of the Menu. For more detail about SEQ, please see “5.8.2 Display Setting- Main M/T SEQ”.  7. Search   Press this key to enter Search Menu. For more detail about Search function, please see “4.8  Search ”.  8. Fast reverse playback or step reverse playback depending on playback mode  9. Reverse playback or pause  10. Forward playback or pause  11. Fast Forward playba
                    
                    Resumen del contenido incluido en la página 14 
                    
                          1.5 BACK PANEL    During initial setup you will be connecting your DVR to multiple input and output devices.  This is done  through the back panel.    4 6  8  10  9 11 12  7  1 2 3  5    1. Power  Plug the DC 12V power source into the power socket.    2. Alarm In  Connect up to 4 / 8 alarm inputs, selectable between dry contact or TTL/CMOS signal polarity.    3. RS485  Terminal Connector for RS485 control.    4. Alarm Out  N.C or N.O type alarm signal out.    5. Audio Output  Connect a speaker
                    
                    Resumen del contenido incluido en la página 15 
                    
                          7. Video In  Connect camera’s video output or other composite video source to the video input connection.    8. Video Out  Connect a CCTV monitor to the video output connection.     9. VGA  Connect a VGA monitor to the VGA output connection.    10. RS232  For DVR serial command control    11. USB 2.0 (back)  USB port allows you to archive video files to USB flash memory device or to connect the mouse.     12. LAN  RJ-45 network connection          8                                             
                    
                    Resumen del contenido incluido en la página 16 
                    
                          Chapter  2  2 INSTALLATION  2.1 VIDEO CONNECTIONS  Camera and CCTV monitor must use 75 Ohm video cable (e.g. RG-59, RG-6, RG-11) with BNC  connectors.    Due to inappropriate absorbability, 50 Ohm coax cable (e.g. RG-58), antenna cable and other types of  coaxial cable are not compatible.   All connected video sources must provide a 1 Vpp NTSC or PAL standard video signal.   When converting transmission lines (twisted pair, fibre optics, radio) to the video inputs, be sure to verify  accurate 
                    
                    Resumen del contenido incluido en la página 17 
                    
                          2.3 ALARM INPUT / OUTPUT INSTALLATION   ECOR DVR provides 4 / 8 alarm inputs.   Inputs have to be switched through dry contacts. The output relays provide a dry N.O. / N.C. contact..  All settings are programmed in the ALARM menu.  Pin assignment:    Group PIN label Description  Alarm in 1 Alarm input 1   G Common ground for alarm inputs    2 Alarm input 2   3 Alarm input 3   G Common ground for alarm inputs    4 Alarm input 4  Alarm out NC Output relay, N.C. contact    COM Output relay, commo
                    
                    Resumen del contenido incluido en la página 18 
                    
                          2.4 NETWORK CONNECTION   ECOR DVR provides fast MPEG-4 format image transmission and network remote configuration.    ATTENTION: A monitor is required for initial network configuration. For more information about  network setup, please refer to Chapter 7.   Physically, two basic types of connection are possible:    2.4.1 Direct PC Connection through Crossover Network Cable     Figure 2.1  The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of  co
                    
                    Resumen del contenido incluido en la página 19 
                    
                          2.4.3 Network System Requirements  Connection type: 100Base-T  Min recommended network bandwidth: 256 K  Max. required network bandwidth: 3 M  Protocol types used: TCP, UDP, SMTP, HTTP, NTP  Required ports: 80, 1600; for port information, please refer to “5.6, Network Setting”.    2.5 SPEED DOME INSTALLATION  Speed dome or pan/tilt/zoom control is available through web browser if the DVR is connected to a network.  Local control is provided by the optional EKB 500 keyboard.   Supported protoco
                    
                    Resumen del contenido incluido en la página 20 
                    
                          2.6 FINAL INSTALL PROCESS  Once you have completed the basic wiring connections, you are ready to turn on the DVR. Simply plug in  the power source. The POWER LED will light up if power is normal. Once the system has finished loading,  you can begin to set up the menu options for the DVR.        13