Resumen del contenido incluido en la página 1
7” Portable LCD TV with NTSC Tuner
FLM-0711LA
20060525
Resumen del contenido incluido en la página 2
Polaroid. Add a little color to your life. Since 1937, America has turned to Polaroid for their photography needs. Today, families look to Polaroid for consumer electronics that define the digital age: plasma and LCD TVs, portable and standard DVD players, digital cameras. And while our selection has changed, you’ll still receive the same friendly, helpful service that made Polaroid an American icon. Congratulations on your new Polaroid LCD TV purchase. To ensure your new LCD TV provi
Resumen del contenido incluido en la página 3
Important Safety Instruction The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
Resumen del contenido incluido en la página 4
Important Safety Instruction NOTES 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install according to the manufacturer’s instructions. 8. Do not install near any heat sour
Resumen del contenido incluido en la página 5
Product Features TV Signal Can be connected to the TV antenna for receiving TV signal. Superior Sound Built-in 2x1.5w stereo amplifier realizes high quality sound effects. LCD (Liquid Crystal Display) Designed with 7" color TFT liquid crystal display clearly shows the data. Audio and Video Input and Output Audio and video output can be connected to external audio and video input device and external AV signal source. Channel Se
Resumen del contenido incluido en la página 6
Table Of Contents Introduction--------------------------------------------------------------------------------------------- 1 Important Safety Instructions----------------------------------------------------------------------- 2 Product Features ------------------------------------------------------------------------------------ 4 Table of Contents-------------------------------------------------------------------------------------- 5 Product Description-----------------------------------
Resumen del contenido incluido en la página 7
Product Description Main Panel 1. Power button Press to turn on or off the power. 2. MENU button Press to enter or exit the setup menu. 3. CH / button In TV mode, press to select channel. In the menu, press to adjust the value. 4. CH +/ button In TV mode, press to select channel. In the menu, press to adjust the value. 5. button Press to select item in the setup menu, used as direction button. 6.
Resumen del contenido incluido en la página 8
Product Description (continued) 11. TV Antenna jack (2) Used to connect to the external antenna or the CATV connecting line. 12. TV Antenna jack (3) Used to connect to the external antenna. 13. LCD screen 7" color TFT LCD screen clearly display the data. Left Panel 1. Headphone jack When the headphone is plugged, the internal speakers output will turn off automatically. 2. Volume Control knob Used to adjust the volume of the headphone a
Resumen del contenido incluido en la página 9
Remote Control Description Remote Control - 8 -
Resumen del contenido incluido en la página 10
Remote Control Description 1. Power button Press to access or exit standby mode. 2. LCD ON/OFF button Press to turn on or off the LCD screen display. 3. 16:9 button Press to change the screen aspect ratio to 16:9. 4. 4:3 button Press to change the screen aspect ratio to 4:3. 5. MENU button Press to enter or exit the setup menu. 6. Direction buttons ( ▲▼◄►) Press to select or adjust items. 7. ENT button Press to confirm the selection in
Resumen del contenido incluido en la página 11
Preparation of Remote Control Usage of remote control • The battery size is CR2025 For best results, please aim the remote • Refer to the drawing below, to control directly at the unit’s remote remove the battery receptacle. sensor. Please operate the remote • Insert the battery with the correct control within angles about 60 degrees polarity facing up according to the and distance about 5 meters without mark on the battery holder. obstructions between the remote co
Resumen del contenido incluido en la página 12
Rechargeable Battery Description About Rechargeable Battery Pack The unit can be connected with a lithium polymer rechargeable battery that attaches to the bottom of the unit. Your new battery should be fully charged before initial use. Charging time is normally about 4 hours. A fully charged battery delivers about 2.5 to 3 hours of use, but playing time varies from disc to disc. If the battery will not be used for . a long period of time, fully charge the battery prior to
Resumen del contenido incluido en la página 13
Rechargeable Battery Description Battery Pack Attaching and Placement The unit’s power supply is the AC power adapter or the battery pack. The battery pack can be used as a stand. Refer to the following steps for attaching the Battery Pack: 1. Place the unit on a soft and smooth surface with its back cover facing UP (to avoid scratching the screen). 2. Position the Battery Pack directly toward the battery slot on the back cover of the unit. 3. Align the pins on the bat
Resumen del contenido incluido en la página 14
Rechargeable Battery Description Charging the Battery Pack The battery must be attached to the unit to charge it. Plug the Power Adapter into the unit’s DC 9.5V IN Jack, which is located on left of the unit. Plug the other end of the Power Cord into a wall Outlet. Detaching the Battery Pack If the unit is not going to be used for long periods of time, the Battery Pack should be detached. Make sure the power is turned OFF before detaching the Battery Pack. A
Resumen del contenido incluido en la página 15
System Connections • Before plugging the power cord into an AC outlet, make sure that all other connections have been made as described below. • Always ensure that the unit, TV and any other electrical components are switched OFF before connecting to the unit. Power Supply Connection Connect the supplied adapter to the side of the unit in the jack marked “DC 9.5V IN”. Plug the polarized two-prong end of the power cord to an AC100-240V outlet. If you have difficu
Resumen del contenido incluido en la página 16
System Connections Connecting to an Amplifier The unit can be connected to an amplifier. Plug the supplied A/V cable into the audio jack on the left side of the unit and plug the other end into an audio input on the amplifier. Please refer to the equipment’s manual of your amplifier before connecting. Switch the TV/AV to TV. In TV mode, it output analog audio signal. Connecting to an External AV Signal Source The unit supports AV in
Resumen del contenido incluido en la página 17
System Connections Connecting to a DC Adapter Connect one end of the specific DC adapter to the “DC 9.5V IN” jack on the left panel of the unit, and connect the other end to the cigarette lighter socket in the car as shown below: • The power supply of the car is not suitable for charging the battery. • Do not connect the unit to the car adapter when you start the car. Connecting to a Headphone Connect the headphone to the headphone jac
Resumen del contenido incluido en la página 18
System Connections Connecting to CATV antenna Connect one end of the provided connecting line to the TV signal input jack on the right panel of the unit, and the other end to the CATV signal source, as shown below: After connection, switch the TV/AV to TV. Connecting to external antenna (1) Plug the provided external antenna (1) to the TV signal input jack and two fixing jacks on the right panel of the unit, as shown below:
Resumen del contenido incluido en la página 19
System Connections Connecting to external antenna (2) Plug the provided external antenna (2) to the TV signal input jack on the right panel of the unit, as shown below: After connection, switch the TV/AV to TV. - 18 -
Resumen del contenido incluido en la página 20
TV Setup Preparation 1. Connect the unit to the external antenna or CATV connecting cord. 2. Connect to power supply. 3. Turn on the power of the unit. 4. Switch the TV/AV to TV. 5. Press the MENU button to enter the setup menu. Picture Setup Menu Press the MENU button once to enter the Picture setup menu, as shown on the below: PICTURE COLOR 30 CONTRAST 30 BRIGHT 30 The items in the men
