Resumen del contenido incluido en la página 1
20.1 " WIDE SCREEN
TFT-LCD MONITOR
V202 Series
USER MANUAL
www.viewera.com
Rev. 1.0
Resumen del contenido incluido en la página 2
Table of Contents EMC Compliance … … … … … … ….. … … … … … … … … … … … … … … … … … … … … …. … …....1 Important Precautions ............................................................................................................2 1. Package contents . … … … … … … … … … … … … … … … … … … … … … … … … … ….. … … ….3 2. Installation … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … ….3 2.1 Rear panel … … … … … … … …..............................................................
Resumen del contenido incluido en la página 3
EMC COMPLIANCE This device has been tested and found to comply with the standards for a class B digital device, pursuant to Part 15 of FCC Rules. Those standards are designed to provide reasonable protection against harmful interference in a residential installation. This device generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this device does cause harmful inte
Resumen del contenido incluido en la página 4
IMPORTANT PRECAUTIONS 1. Before using this device, please read all the instructions in this manual carefully. 2. Please keep the manual carefully for future reference. 3. Unplug this device from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp or wet cloth to clean. Please use LCD screen detergent for cleaning if it is still dirty. 4. Do not use the parts not recommended by the manufacturer, otherwise it may cause a hazard. 5. When unplugging t
Resumen del contenido incluido en la página 5
1. Package Contents Unpack the package and check you have the following items. 20.1"TFT-LCD monitor VGA signal cable Power cord User manual DVI signal cable Audio cable If any of the items is missing, please contact with your dealer at which you purchased the monitor. 2. Installation 2.1 Rear Panel 1. Power supply: AC 100-240 V, 60/50 Hz. 2. Audio: Connecting one end of the PC audio cable to AUDIO on the monitor and the other end to the sou
Resumen del contenido incluido en la página 6
2.2 Installation The monitor is equipped with an automatic sensing AC power adapter for a voltage range from 100 to 240 VAC at a frequency of 50 to 60 Hz. Before connecting the cables, please make sure that the monitor and the computer power are both turned off. Please follow the steps to install your monitor. 2.2.1 Connecting the signal cable Plug one end of the VGA cable or DVI cable to the computer and the other end to the video signal connector on the monitor, and then tighten the t
Resumen del contenido incluido en la página 7
2.3 Resolution setup For the best display quality, please set the monitor type in Windows. Control Panel > Display > Settings > Advanced > List All Modes For V202 series, please set to “ 1680 × 1050 @ 60Hz ” . Note: If your video/ graphic card does not support the resolution of 1680 x 1050, then you can try to set the resolution to 1280 x 960 or 1280 x 768 to avoid picture stretching. 5
Resumen del contenido incluido en la página 8
3. Control Functions 3.1 User Controls The monitor digital control functions are located on the front panel. They are shown in the figure below and described in the following paragraphs. 1. Power switch with LED indicator key: It is used to turn on or off the monitor. When the monitor is turned on, the LED is lit up in green (or blue). When the monitor is in power saving mode, the LED will turn red and flashing. 2. OSD Menu key: When it is press
Resumen del contenido incluido en la página 9
8. Signal Source: Change the signal mode between VGA and DVI on OSD. 9. Color: Adjust the color temperature of the picture. 9300K - Select the color temperature of 9300K. 7800K - Select the color temperature of 7800K. 6500K - Select the color temperature of 6500K. User mode: Adjust R. G. B. gain levels. W-B: Auto color balance. 10. Volume: Adjust the speaker volume. 11. Sharpness: Adjust the picture to be in focus. 12. OSD Position/ Transparency: Adjust the OSD display position and tran
Resumen del contenido incluido en la página 10
4. Specifications Model V202 Series Features Panel Type: Active TFT-LCD Size: 20.1"diagonal Pixel Pitch: 0.258 (W) × 0.258 (H) mm 2 2 Brightness: 270 cd/m (min), 300 cd/ m (typical) Contrast Ratio: 500:1 (min,),800:1 (typical) Response Time: 5 ms (typical) Viewing Angle(H / V) 160°/160° (typical) Max. Resolution: 1680 (W) x 1050 (H) Display Color 16.7M Supported resolution 640 x 480 @ 60/ 72/ 75 Hz 800 x 600 @ 60/ 72/ 75 Hz 1024 x 768 @ 60/ 70/ 75 Hz 1280 x 768 @ 60 Hz
Resumen del contenido incluido en la página 11
5. Dead Pixel Policy Dead pixels on the TFT LCD panel are sometimes inevitable. The replacement policy varies with different models. Please refer to the product specification on ViewEra ’ s website. 6. Warranty & Customer Service a. Warranty ViewEra warrants the V202 series TFT-LCD monitors for 1 year on LCD panel, parts and labor. For detailed information, please refer to our website. (http:// www.viewera.com/warranty.htm) b. Customer Service Contact your ViewEra retailer or View
Resumen del contenido incluido en la página 12
8. Troubleshooting 1) No image Check if the power cord 、the monitor and the power plug are well connected. Check if the monitor is off, please contact support@viewera.com for assistance. 2) “ No Input Signal ” appears. Check if the VGA cable is tightly connected between the video output connector on the video card and the video input connector on the monitor. Check if your video card driver is correctly installed. If possible, please re-install or update your video card dri
