Manual de instrucciones de Allstar Products Group 9921

Resumen del contenido incluido en la página 1

STEP 4: CHECK OUT YOUR DOOR OPERATING SYSTEM

Installation Instructions
CAUTION: THERE ARE NO USER SERVICEABLE PARTS INSIDE
TRANSMITTER OR RECEIVER
A. After installing your receiver and transmitter, check the operation of your radio
controls by moving approximately 35 feet back from the garage door, then press
the transmitter button. Operation at this distance should be reliable.
B. If the transmitter doesn’t activate the operator, check the coding switches on both
the transmitter and

Resumen del contenido incluido en la página 2

D. Model 8832 - Double Door Garage Models 9931, 8832, 8833: The coding switch in these models consist of eight or nine 3 2 1 3 2 1 small switches, each of which can be placed in any of three different positions. (+, 0, -). See 3 2 1 3 2 1 Fig. 2. Using a small screwdriver, set both the transmitter and receiver coding switches identically. (Your private code setting). DO NOT SET ALL THE SWITCHES IN THE SAME POSITION. EXAMPLE: 104386 (1) (2) NOT ALL + or 0