Manual de instrucciones de Chauvet CH-260

Resumen del contenido incluido en la página 1

Caution
Do not obstruct the air vents.
Do not touch unit or lamps while hot.
No user serviceable parts inside, please refer to CHAUVET for service.
Power Connections
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other
connections be required they must be carried out with the following configuration.
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Gr

Resumen del contenido incluido en la página 2

In order to replace the lamp, disconnect from main power supply first, and unscrew the 3 screw fixings to remove the lamp replacement cover (the head of the unit), which is highlighted on the Rotary Speed Control At the Rear: diagram (fig.1). Only use the appropriately rated lamp as use of any other lamp type may cause the unit to be non-operational. ⇒ Screw Cap Mounting Bracket Fuseholder Due to the nature of halogen lamps it is vitally important that you do not touch the new replacement lamp w