Manual de instrucciones de Specialized Transition Carbon-All Models

Resumen del contenido incluido en la página 1

BICYCLE/FRAME INSTRUCTION GUIDE
TRANSITION CARBON - ALL MODELS
THIS INSTALLATION GUIDE CONTAINS IMPORTANT INFORMATION.
PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE.
Congratulations! The Specialized bicycle you have chosen is among
the finest of advanced composite products available in cycling.
Carbon fiber is a very special material that requires particular care
during assembly, storage and riding. This installation guide contains
instructions and warnings, plus torque specifications.
Plea

Resumen del contenido incluido en la página 2

TRANSITION CARBON - ALL MODELS HEADSET Your Specialized frame does not require any head tube pre-installation preparation. All surfaces are already prepared from the factory, with the exception of greasing the cups. Use 36° x 45° x 38mm (1”) cartridge bearings. No tools are required for the installation or re- moval of the cartridge bearings. BOTTOM BRACKET Your Specialized frame does not require any bottom bracket pre-installation preparation. All surfaces are already prepared from the fac

Resumen del contenido incluido en la página 3

WARRANTY For the complete warranty provisions and any additional information, please refer to the Specialized Owner’s Manual or www.specialized.com. SPECIALIZED BICYCLE COMPONENTS 15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229 Please note all instructions are subject to change for improvement without notice. Rev.1, December 2007