Manual de instrucciones de Behringer SUPER-X PRO CX2310

Resumen del contenido incluido en la página 1

User Manual
SUPER-X PRO CX2310
High-Precision Stereo 2-Way/Mono 3-Way Crossover
with Subwoofer Output

Resumen del contenido incluido en la página 2

2 SUPER-X PRO CX2310 User Manual Table of Contents Thank you ....................................................................... 2 Important Safety Instructions ...................................... 3 Legal Disclaimer ............................................................. 3 Limited Warranty ........................................................... 3 1. Introduction ............................................................... 5 1.1 Before you begin ............................

Resumen del contenido incluido en la página 3

3 SUPER-X PRO CX2310 User Manual 9. Do not defeat the safety purpose of the polarized UNDERTAKING OR REPRESENTATION. THIS MANUAL Important Safety or grounding-type plug. A polarized plug has two blades IS COPYRIGHTED. NO PART OF THIS MANUAL MAY Instructions with one wider than the other. A grounding-type plug BE REPRODUCED OR TRANSMITTED IN ANY FORM has two blades and a third grounding prong. The wide OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, blade or the third prong are provided for your

Resumen del contenido incluido en la página 4

4 SUPER-X PRO CX2310 User Manual “Support” at behringer. com. If your country is not • connection or operation of the unit in any way (3) This warranty does not detract from the seller’s listed, please check if your problem can be dealt with that does not comply with the technical or safety obligations in regard to any lack of conformity of the by our “Online Support” which may also be found under regulations applicable in the country where the product and any hidden defect. “Support” at behr

Resumen del contenido incluido en la página 5

5 SUPER-X PRO CX2310 User Manual 1. Introduction Connection to the mains is made by means of a mains cable with an IEC receptacle which complies with the appropriate safety regulations. If you want to operate a loudspeaker system, which consists of several loudspeakers covering different frequency bands, then you naturally have ◊ Please note that all units must be grounded properly. For your own to work with suitably differentiated input signals for each loudspeaker. safety, you should never

Resumen del contenido incluido en la página 6

6 SUPER-X PRO CX2310 User Manual (INPUT) (CLIP) (LOW CUT) (LOW/MID) (LOW OUTPUT) (MID/HIGH) (MID OUTPUT) (HIGH OUTPUT) (INPUT) (CLIP) (LOW CUT) (LOW/HIGH) (LOW OUTPUT) (HIGH OUTPUT) (INPUT) (CLIP) (LOW CUT) (LOW/HIGH) (LOW OUTPUT) (HIGH OUTPUT) (1) (2) (3) (4) (6)(5)(7) (9)(8) (10) (11) (13) (12) Fig. 2.1: Active control elements on the front panel of the SUPER-X PRO in stereo 2-way operation with separate subwoofer signal (1) INPUT control. This control adjusts the input gain over the range (7)

Resumen del contenido incluido en la página 7

7 SUPER-X PRO CX2310 User Manual (INPUT) (CLIP) (LOW CUT) (LOW/MID) (LOW OUTPUT) (MID/HIGH) (MID OUTPUT) (HIGH OUTPUT) (INPUT) (CLIP) (LOW CUT) (LOW/HIGH) (LOW OUTPUT) (HIGH OUTPUT) (INPUT) (CLIP) (LOW CUT) (LOW/HIGH) (LOW OUTPUT) (HIGH OUTPUT) (1) (2) (3) (4) (6) (5) (9)(8) (11) (13) (12) (7) (7) (8) (10) (9) (13) (12) (7) (10) (11) Fig. 2.3: Active control elements on the front panel of the SUPER-X PRO in mono 3-way operation with separate subwoofer signal 2.2 Mono 3-way operation with separa

Resumen del contenido incluido en la página 8

8 SUPER-X PRO CX2310 User Manual 3.3 Correcting problems 3. Applications Check the entire frequency response of the system. Rooms have quite You will need some tools to help set up the SUPER-X PRO to its optimal an impact on the frequency response of speaker systems, due to resonance and configuration. To set up the crossover frequency you need to know which various reflections, so you cannot expect to achieve a linear frequency response frequency range a loudspeaker stack covers, over wh

Resumen del contenido incluido en la página 9

9 SUPER-X PRO CX2310 User Manual 4. Audio Connections Balanced ¼" TRS connector As a standard, the BEHRINGER SUPER-X PRO CX2310 is equipped with electronically servo-balanced inputs and outputs. The circuit design features strain relief clamp automatic hum suppression for balanced signals and so ensures trouble-free sleeve operation, even at the highest operating levels. Externally induced mains hum, ring etc. can therefore be effectively suppressed. The automatic servo-function tip recogni

Resumen del contenido incluido en la página 10

10 SUPER-X PRO CX2310 User Manual 5. Specifications Inputs Power Supply Connectors XLR Mains voltage Type Electronically servo-balanced, HF filtered USA/Canada 120 V~, 60 Hz Impedance balanced >50 kOhm, unbalanced >25 kOhm U.K./Australia 240 V~, 50 Hz Max. Input level +22 dBu typical, balanced or unbalanced Europe 230 V~, 50 Hz CMRR >40 dB, typical >55 dB at 1 kHz General Export Model 100 - 120 V~, 200 - 240 V~, Outputs 50 - 60 Hz Connectors XLR Power consumption <17 W Type

Resumen del contenido incluido en la página 11

We Hear You