Manual de instrucciones de Fujitsu FTR-G1

Resumen del contenido incluido en la página 1

Compact Power Relay
1 Pole—25A for Automotive Applications
RoHS compliant
FTR-G1 Series
n FEATURES
l Compact for high density packaging (70% volumne of previ-
ous generation FTR-P3 series)
l High contact capacity with proven contact material (min.
100,000 operations, 14V, 25A achived, even with reduced
size)
l Coil power savings (640mW nominal achived with state-of-
the-artmagnetic analysis/design)
l Ease of PCB layout (all terminals on perimeter, co

Resumen del contenido incluido en la página 2

FTR-G1 SERIES n SPECIFICATIONS Item FTR-G1 Contact Arrangement 1 form C Material Silver-tin oxide-indium Contact Path V oltage Drop (initial) Maximu m 100 mΩ (at 6 VDC 1A after stabilization) Rating 25 A at14VDC (locked motor load) Maximum CarryCurrent*1 25 A /1 hour(25°C, 100% rated coil voltage) MaximumSwitching Current (reference) 35A, 16VDC

Resumen del contenido incluido en la página 3

FTR-G1 SERIES n INSULATION Item Specification Resistance Minimum 100 MΩ 1 min. Dielectric open contacts 500 VAC (50/60 Hz) 1min. Strength coil and contacts 500V AC (50/60 Hz) 1 min. n REFERENCE DATA Operate/release voltage distribution Contact resistance distribution Contact current 100 10000 100 FTR-G1CN012W1 Data: FTR-G1CN010W 1 Data: FTR-G1CN010W 1 Units: n=100 Units: n=100 80 80 25°C 1000 60 60 Operate 85°C Release 40 40 100 20 Failure mode: 20 Make contact open by short coil 10 0 0 0

Resumen del contenido incluido en la página 4

FTR-G1 SERIES n DIMENSIONS Schematic + 13.7 0.5 - G1CN012WI 0635F N1 F&T JAPAN Mountinghole layout Schematic (bottom view) (1.00) Type Marking (example) (example) G1CN012W1 Lot No. (weekly code) 0612A Manufacturer Japan Manufacture country Tube ±0.2 375±1 17.9 Unit: mm 4 + 2.5 0.2 - + 4.7 0.2 - + 1.0 0.3 + + 8.0 0.2 3.5 0.2 - - - +0.1 2- O1.5 -0 +0.1 2- O1.0 -0 +0.1 O1.7 -0 + 8.0 0.1 + - 3.5 0.1 - + 6.6 0.5 - + 3.5 0.5 - 20.1 ±0.2 (2.05) (0.95) + 13

Resumen del contenido incluido en la página 5

FTR-G1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information l Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Allof our signal and power relays arelead-free. Please refer to Lead-FreeStatus Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currentlyused in relays is Sn-3.0Ag-0.5Cu. l All signal and powerrelays also comply with RoHS. Pleas

Resumen del contenido incluido en la página 6

FTR-G1 SERIES Fujitsu Components International Headquarter Offices Japan Europe Fujitsu Component Limited Fujitsu ComponentsEurope B.V . Gotanda-Chuo Building Diamantlaan25 3-5, Higashigotanda2-chome, Shinagawa-ku 2132WV Hoofddorp Tokyo 141, Japan Netherlands Tel: (81-3) 5449-7010 Tel:(31-23) 5560910 Fax:(81-3) 5449-2626 Fax:(31-23) 5560950 Email: promothq@ft.ed.fujitsu.com Email: info@fceu.fujitsu.com Web: www.fcl.fujitsu.com Web: http://www.fujitsu.com/emea/services/co