Resumen del contenido incluido en la página 1 
                    
                        1642-VLZ3
16-Channel Mic/Line Mixer
O W N E R ’ S M A N U A L                                                                                                                                                                                                                                                                                                                                                                                                                                                       
                    
                    Resumen del contenido incluido en la página 2 
                    
                        Important Safety Instructions 1.	 Read 	 these	 instructions.		 20.NOTE: 	 	 This	 equipment	 has	 been	 tested	 and	 found	 to	 comply	 with	 2.	 Keep 	 these	 instructions. the	 limits	 for	 a	 Class	 B	 digital	 device,	 pursuant	 to	 part	 15	 of	 the	 FCC	 Rules.	 These	 limits	 are	 designed	 to	 provide	 reasonable	 protection	 3.	 Heed 	 all	 warnings. against	 harmful	 interference	 in	 a	 residential	 installation.	 This	 equip- 4.	 Follow 	 all	 instructions. ment	 generates,	 uses,	 
                    
                    Resumen del contenido incluido en la página 3 
                    
                        Owner’s Manual Other Nuggets of Wisdom Read This Page! For optimum sonic performance, the channel fad- We realize that you must have a powerful han- ers and the MAIN MIX fader should be set near the “U”  kerin’ to try out your new 1642-VLZ3. Or you  (unity gain) markings. might be one of those people who never reads  manuals. All we ask is that you read this page  Always turn down the MAIN MIX fader and CONTROL  NOW, and read the rest later— you’ll be glad you did. ROOM and PHONES knobs before m
                    
                    Resumen del contenido incluido en la página 4 
                    
                        Introduction Thank you for choosing a Mackie professional com- This icon marks information that is critically  pact mixer. The 1642-VLZ3 is equipped with our  i mportant or unique to the 1642-VLZ3. For your  TM precision-engineered XDR2 Extended Dynamic Range own good, read them and remember them. They  premium studio-grade mic preamps will be on the final test. Now that you have your 1642-VLZ3, find out how to get This icon will lead you to in-depth explana- the most from it. That’s where this 
                    
                    Resumen del contenido incluido en la página 5 
                    
                        Owner’s Manual Contents  IMPORTANT SAFETY INSTRUCTIONS ........................ 2 CHANNEL STRIP DESCRIPTION INTRODUCTION ...................................................... 4 25. CHANNEL FADER .................................... 14 HOOKUP DIAGRAMS............................................... 6 26. ASSIGN (1–2, 3–4, L/R) ........................ 14 27. SOLO ..................................................... 14 PATCHBAY DESCRIPTION 28. –20 (SOLO) LED ..................................... 
                    
                    Resumen del contenido incluido en la página 6 
                    
                        HOOKUP DIAGRAMS   From Mics, Keys, Drum machines etc. Stereo Compressor In Out 8 Track Recorder EFX A EFX B Stereo Processor Cassette Recorder Powered Monitors Headphones Recording System 6 164-VLZ3 1642-VLZ3 MONO L R L R PHONES SUB OUTS C/R OUT TAPE TAPE MAIN MAIN OUT BAL/UNBAL BAL/UNBAL OUT OUT IN INSERT BAL/UNBAL CHANNEL INPUTS STEREO RETURNS AUX  SENDS DIRECT OUT CHANNEL INSERTS BAL/UNBAL BAL/UNBAL                                                                                              
                    
                    Resumen del contenido incluido en la página 7 
                    
                        Owner’s Manual Mic 1-5 Guitar Bass Stereo Compressors Mono Effects Guitar Keyboard Drum Machine Stereo Effects Turntable Phono preamp Mono EQs, M-1400i Amps, Additional and (C300) Passive Stage Monitors stereo source Active  PA Speaker/  Subwoofer Processor combination (Pole-mounted SRM450s and SRS1500 active Processor Subwoofers  pictured) Stereo Processor CD Player Digital Multitrack  Recorder Headphones Live Stereo PA System  Owner’s Manual SUB OUTS MONO L R L R PHONES C/R OUT TAPE TAPE MAIN
                    
                    Resumen del contenido incluido en la página 8 
                    
                        Patchbay Description 1 2 4 At the risk of stating the obvious, this is where you  1. MIC INPUTS  plug everything in: microphones, line-level instruments  We use phantom-powered, balanced microphone  and effects, and the ultimate destination for your sound:  inputs just like the big studio mega- consoles, for  a tape recorder, PA system, etc. Many of the features de- exactly the same reason: This kind of circuit is excel- scribed in this section are on top of the mixer, but some  lent at rejectin
                    
                    Resumen del contenido incluido en la página 9 
                    
                        Owner’s Manual Unless you know for certain it is safe to do This 15 dB of attenuation can be very handy when you  so, never plug single-ended (unbalanced) are inserting a signal that is very hot, or you want to add  microphones, instruments, ribbon mics, or a lot of EQ gain, or both. Without this “virtual pad,” a  electronic devices into the MIC [1] input jacks if the scenario like this might lead to channel clipping. phantom power is on. The GAIN controls for stereo channels 9-10 and 11-12  are
                    
                    Resumen del contenido incluido en la página 10 
                    
                        6 5  9 8 7  5. DIRECT OUT Double Busing Only on channels 1–8, these 1/4" balanced jacks How on earth do you get four buses to feed  deliver the signal from the very end of the channel path; eight tracks? Double busing! post-GAIN [3], post-EQ [32], post-LOW CUT [34], post- • Bus 1 feeds SUB OUT 1 and SUB OUT 5, which  FADER [25], and post-MUTE [30]. Use these for record- in turn feed tracks 1 and 5  ing, making the 1642-VLZ3 perfect for an 8-track studio.  • Bus 2 feeds SUB OUT 2 and SUB OUT 6, w
                    
                    Resumen del contenido incluido en la página 11 
                    
                        Owner’s Manual Another method of interfacing a multitrack is called  8. SUB OUTS  in-line monitoring, and requires a mixing console  These 1/4" jacks are usually patched to the inputs of a  dedicated to that, like the Mackie 8•Bus. Each of its  multitrack deck, or to secondary amplifiers in a complex  channels is actually two channels: one carrying the mic/ installation. See page 18 for details of the SUBGROUP  line sound source and the other carrying the multitrack  FADERS [38].  (See also the 
                    
                    Resumen del contenido incluido en la página 12 
                    
                        13. MAIN INSERT These 1/4" jacks are for connecting serial effects such  as compressors, equalizers, de-essers, or filters. The IN- SERT point is after the mix amps, but before the MAIN  17 MIX fader. Insert cables must be wired thusly: SEND to processor 16 ring “tip” (TRS plug) tip sleeve 18 This plug connects to one of the  “ring” mixer’s Channel Insert jacks. RETURN from processor 20 22 19  14 15 14 13 Tip = send (to effects device inputs) Ring = return (from effects device outputs) 11. TAPE 
                    
                    Resumen del contenido incluido en la página 13 
                    
                        Owner’s Manual standby mode. It will not function, but the circuits are  16. MONO LEVEL still live. To remove AC power, either turn off the AC  If Mr. Mono's main mono mix is maxed, just reach for  mains supply, or unplug the power cord from the mixer  this knob and turn it down a bit. Just the thing for send- and the AC mains supply. ing mono signals to mic inputs like camcorders, tele- phone interface boxes, even answering machines. With  As a general guide, you should turn on your mixer  the 
                    
                    Resumen del contenido incluido en la página 14 
                    
                        Channel Strip Description There are eight mono, and four stereo channel strips.  26. ASSIGN (1–2, 3–4, L/R) Many of the functions are identical for the mono and  Alongside each channel fader are four buttons,  stereo channels. We’ll start at the bottom and work our  labeled SOLO, 1–2, 3–4 and L/R. The bottom three are  way up, pointing out the differences as we go along. collectively referred to as channel assignment switches.  1, 3 and L are the left sides of these stereo pairs, and  “U” LIKE U
                    
                    Resumen del contenido incluido en la página 15 
                    
                        Owner’s Manual LEVEL SET (PFL) taps the channel signal  30. MUTE before the fader. If you have a channel’s fader  Engaging a channel’s MUTE switch provides the same  set way below “U” (unity gain), SOLO won’t  results as turning the fader all the way down: Any chan- know that and will send a unity gain signal to the con- nel assignment to L/R, 1-2 or 3-4 will be interrupted. All  trol room, headphones, and meters. That may result in a  the post AUX sends will be silenced, as will the DIRECT  sta
                    
                    Resumen del contenido incluido en la página 16 
                    
                        The MID EQ , or “midrange,” has a fixed bandwidth of  CONSTANT LOUDNESS ! ! ! 1 octave. The MID knob sets the amount of boost or cut,  The 1642-VLZ3’s PAN [31]  up to 15 dB, and is effectively bypassed at the center  controls employ a design  detent. The frequency knob sets the center frequency,  34 called “Constant Loudness.”  sweepable from 100 Hz to 8 kHz. It has nothing to do with living next to  a freeway. As you turn the PAN knob +15 +15 +10 +10 from left to right (thereby causing  +5 +5 t
                    
                    Resumen del contenido incluido en la página 17 
                    
                        Owner’s Manual using AUX 1 or 2 in the PRE [36] mode,  33. 4-BAND FIXED-FREQUENCY EQ these mix levels can be obtained indepen- The stereo channels (9-16) have a 4-band, fixed-fre- dently of a channel’s fader settings. quency equalization: LOW shelving at 80 Hz, LOW MID  34 peaking at 400 Hz, HI MID peaking at 2.5 kHz, and HI  We recommend going into a ste- shelving at 12 kHz. reo reverb in mono and return- ing in stereo. We have found  Each of these filters provides up to 15 dB of boost or  that
                    
                    Resumen del contenido incluido en la página 18 
                    
                        Output Section Description The main mix signals are off with the fader fully down,  the “U” marking is unity gain, and fully up provides 10  dB of additional gain. This additional gain will typically  never be needed, but it’s nice to know it’s there. The  fader itself is a stereo version of the channel and sub- group faders — same supersmooth custom taper, same  dead silence when turned fully down. This is the fader  to pull down at the end of the song when you want “The  Great Fade-Out.” 38. S
                    
                    Resumen del contenido incluido en la página 19 
                    
                        Owner’s Manual 42. CONTROL ROOM SOURCE  Typically, the engineer sends the main mix to a live  audience or to a mixdown deck (if recording). But what  if the engineer needs to hear something other than the  main mix? With the 1642-VLZ3, the engineer has several  choices of what to listen to.  Via these switches, you can choose to listen to any  combination of MAIN MIX, SUBS 1-2, SUBS 3-4 and  TAPE. Selections made here deliver stereo signals to  the control room, headphones, and meter display. Th
                    
                    Resumen del contenido incluido en la página 20 
                    
                        44. MODE (NORMAL (AFL)/LEVEL SET (PFL)) 46. SOLO (LEVEL) You may have already seen some of this in the SOLO This knob controls the level of the signals coming  discussion, but in case you missed it: The 1642-VLZ3’s from the SOLO system. It’s range is off when fully down,  solo system comes in two flavors: unity at the center detent, with 10 dB additional gain  turned fully up. After the SOLO level is determined, the  • NORMAL (AFL) (sometimes called SIP, or solo- SOLO signals will proceed to tak