Resumen del contenido incluido en la página 1
DES-1008D
8-Port 10/100Mbps
Dual Speed Ethernet Switch
User’s Guide
Rev. 02 (Mar. 2000)
6012-9600011
Printed In Taiwan
RECYCLABLE
i
Resumen del contenido incluido en la página 2
LIMITED WARRANTY D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product only to the person or entity who originally purchased the product from D-Link or its authorized reseller or distributor. Limited Hardware Warranty: D-Link warrants that the hardware portion of the D-Link products described below (“Hardware”) will be free from material defects in workmanship and materials from the date of original retail purchase of the Hardware, for the period set forth bel
Resumen del contenido incluido en la página 3
to the defective Hardware. The Warranty Period shall extend for an additional ninety (90) days after any repaired or replaced Hardware is delivered. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware (or part thereof)
Resumen del contenido incluido en la página 4
REGISTRATION CARD MAY AFFECT THE WARRANTY FOR THIS PRODUCT. Submitting A Claim. Any claim under this limited warranty must be submitted in writing before the end of the Warranty Period to an Authorized D-Link Service Office. The claim must include a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D- Link to confirm the same. The original product owner must obtain a Return Material Authorization (RMA) number from the Authorized D-Link
Resumen del contenido incluido en la página 5
surge, and cosmetic damage; and Any hardware, software, firmware or other products or services provided by anyone other tha n D-Link. Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS- IS” WITHOUT ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, T
Resumen del contenido incluido en la página 6
specific legal rights and the product owner may also have other rights which vary from state to state.
Resumen del contenido incluido en la página 7
FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communicat
Resumen del contenido incluido en la página 8
TABLE OF CONTENTS ABOUT THIS GUIDE........................................................................1 PURPOSE ..............................................................................................1 OVERVIEW OF THIS USER’S GUIDE ...........................................................1 INTRODUCTION ..............................................................................2 FAST ETHERNET T ECHNOLOGY................................................................2 SWITC
Resumen del contenido incluido en la página 9
ABOUT THIS GUIDE Congratulations on your purchase of the DES-1008D. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible desktop package. Purpose The purpose of this manual is to show you how to install and configure your DES-1008D. Overview of this User’s Guide ? Chapter 1, Introduction. Describes the DES-1008D and its features. ? Chapter 2, Unpacking and Setup. Helps you get started with the basic installation of the DES-1008
Resumen del contenido incluido en la página 10
h INTRODUCTION This chapter describes the features of the DES-1008D and some background information about Ethernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response times. Among them, 100BASE-T (Fast Ethern
Resumen del contenido incluido en la página 11
Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by dividing a local area network into different segments, which don’t compete with each other for network transmission capacity. The DES-1008D acts as a high-speed selective bri
Resumen del contenido incluido en la página 12
h Features The DES-1008D was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. The DES-1008D with its small, compact size was specifically designed for small to middle workgroups. The DES-1008D can be installed where space is limited; moreover, the DES-1008D provides immediate access to a rapidly growing network through a wide range of functions. The DES-1008D is ideal for deployment with mu
Resumen del contenido incluido en la página 13
?? Uplink/ MDI-II (media dependent interface) port for uplink to another switch, hub or repeater. ?? Store and forward switching scheme capability. As the result of complete frame checking and error frame filtering, this scheme prevents error packages from transmitting among segments. ?? NWay Auto-negotiation for any port. This allows for auto- sensing of speed (10/100Mbps) thereby providing you with automatic and flexible solutions in your network connections. ?? Flow control for an
Resumen del contenido incluido en la página 14
h Unpacking and Setup This chapter provides unpacking and setup information for the DES-1008D. Unpacking Open the box and carefully unpacks its contents. The box should contain the following items: ? One DES-1008D ? One external power adapter ? This User’s Guide. If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup for the DES-1008D can be performed using the following steps: ?? The surface must support at least 1.5 Kg f
Resumen del contenido incluido en la página 15
IDENTIFYING EXTERNAL COMPONENTS This section identifies all the major external components of the DES-1008D. Both the front and rear panels are shown followed by a description of each panel feature. The indicator panel is described in detail in the next chapter. Front Panel The figure below shows the front panel of the DES-1008D. ? LED Indicator Panel Refer to the LED Indicator section for detailed information about each of the DES-1008D’s LED indicators. LED Indicators Po
Resumen del contenido incluido en la página 16
h Full-Duplex/Collision (Full-Duplex/Collision) This LED indicator lights green when a respective port is in full duplex (FDX) mode. Otherwise, it is blinking when collisions are occurring on the respective port. 100M Link/Activity, 10M Link/Activity (100M LINK/ACT(green), 10LINK/ACT(amber)) This indicator lights green when the port is connected to a 100Mbps Fast Ethernet station, if the indicator blinking green will be transmission or received data on the 100Mbps network. Otherwise
Resumen del contenido incluido en la página 17
? MDI-X Jacks: Use these jacks to connect stations to the hub. These are MDI-X (Medium-Dependent Interface, Cross-wired) jacks, which mean, you can use ordinary straight-through twisted-pair cables to connect user machines and servers to the hub through them. If you need to connect another device with an MDI-X jack, such as another hub or an Ethernet switch, you should use a crossover cable, or make the connection using the MDI-X jack (described below). ? Uplink Jack(s) (MDI-II): Use
Resumen del contenido incluido en la página 18
h CONNECTING THE DES-1008D This chapter describes how to connect the DES-1008D to your Fast Ethernet network. In each of the following figures, the DES-1008D is shown. PC to DES-1008D A PC can be connected to DES-1008D via a two-pair Category 3, 4, 5 UTP/STP straight cable. The PC (equipped with a RJ-45 10/100Mbps phone jack) can be connected to any of the 8 ports (1x - 8x). The LED indicators for PC connection depend on the LAN card’s capabilities. If LED indicators are not lit a
Resumen del contenido incluido en la página 19
A. 10BASE-T Hub For a 10BASE-T hub, the DES-1008D LED indicators should light up as the following: “Full-Duplex/Collision” indicator is OFF. “100LINK/ACT,10LINK/ACT LED” indicator is light amber. B. 100BASE-TX Hub For a 100BASE-TX hub, the DES-1008D LED indicators should light up as the following: “Full-Duplex/Collision” LED indicator is OFF. “100LINK/ACT,10LINK/ACT” LED indicator is light green. Hub without Uplink (MDI-II) port If a hub is not equipped with an uplink (MDI-II) po
Resumen del contenido incluido en la página 20
h A. Using straight cable When using straight cable, this is done from the uplink (MDI-II) port of the DES-1008D (DES-1008D A) to any of the 10Mbps or 100Mbps (MDI-X) port of the other switch (switch B) or other devices. B. Using crossover cable When using crossover cable, this is done from any (MDI-X) port of the DES-1008D (DES-1008D A) to any of the 10Mbps, 100Mbps (MDI-X) port of the other switch (switch B) or other devices. 1. The “100LINK/ACT,10LINK/ACT” LED indicator light g
