Resumen del contenido incluido en la página 1
ENGLISH FRANÇAIS ESPAÑOL
website http://www.lgservice.com
e-mail http://lgservice.com/techsup.html
LG
LG Floor Standing Type
Air Conditioner
OWNER'S MANUAL
IMPORTANT
• Please read this owner's manual carefully and thoroughly
before installing and operating your air conditioner.
• Please retain this owner's manual for future reference after
reading it thoroughly.
Resumen del contenido incluido en la página 2
Floor Standing- Type Air Conditioner Owner’s Manual TABLE OF CONTENTS FOR YOUR RECORDS Write the model and serial numbers here: Safety Precautions.................3 Model # Serial # Operating Instructions...........9 You can find them on a label on the side of each unit. Dealer's Name Date Purchased Maintenance and Service ....25 Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues. Celsius(°C) ↔ Fahrenheit (°F) READ THIS MANUAL Convert Tab
Resumen del contenido incluido en la página 3
ENGLISH Safety Precautions Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications. This symbol indicates the possibility of death or serious injury. WARNING This symbol indicates the possibility of injury or damage. CAUTION Meanings of symbols used in this manual are as shown below.
Resumen del contenido incluido en la página 4
Safety Precautions Do not modify or extend the Do not install, remove, or re- Be cautious when unpacking power cable. install the unit by yourself and installing the product. (customer). • There is risk of fire or electric • There is risk of fire, electric • Sharp edges could cause injury. shock. shock, explosion, or injury. Be especially careful of the case edges and the fins on the condenser and evaporator. For installation, always contact the Do not install the product on a Be sure the in
Resumen del contenido incluido en la página 5
ENGLISH Safety Precautions Do not allow water to run Do not store or use flammable Do not use the product in a into electric parts. gas or combustibles near the tightly closed space for a product. long time. • It may cause There is risk of fire, • There is risk of fire or failure of • Oxygen deficiency could occur. failure of the product, or electric product. shock. When flammable gas leaks, If strange sounds, or small or Stop operation and close the window turn off the gas and open a smoke c
Resumen del contenido incluido en la página 6
Safety Precautions When the product is not be used for a long Take care to ensure that nobody could step time, disconnect the power supply plug or on or fall onto the outdoor unit. turn off the breaker. • There is risk of product damage or failure, or • This could result in personal injury and product unintended operation. damage. CAUTION Installation Always check for gas Install the drain hose to Keep level even when (refrigerant) leakage after ensure that water is drained installing the p
Resumen del contenido incluido en la página 7
ENGLISH Safety Precautions Do not block the inlet or Use a soft cloth to clean. Do Do not touch the metal parts of outlet of air flow. not use harsh detergents, the product when removing the solvents, etc. air filter. They are very sharp! • It may cause product failure. • There is risk of fire, electric shock, • There is risk of personal injury. or damage to the plastic parts of the product. Do not step on or put Always insert the filter securely. Do not insert hands or other anyting on the pr
Resumen del contenido incluido en la página 8
Prior to Operation Prior to Operation Preparing for Operation 1. Contact an installation specialist for installation. 2. Plug in the power plug properly. 3. Use a dedicated circuit. 4. Do not use an extension cord. 5. Do not start/stop operation by plugging/unplugging the power cord. 6. If the cord/plug is damaged, replace it with only an authorized replacement part. Usage 1. Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose occupants, pets, or plants
Resumen del contenido incluido en la página 9
ENGLISH Operating Instructions Operating Instructions Features and Specifications 1. 3D Stereo Cooling 7. Whisper quiet operation This first developed 3D Stereo Cooling Method 8. Wireless remote control makes clear a dead zone to cool the indoor evenly 9. 3 cooling speeds within a early time. 10. Removable air filter 2. Edge Installation Design 11. Anti-Bacteria filter You can use the installation space in a effective 12. 3 minutes delay circuit way to adopt semi built-in type of 3D Diamond 13.
Resumen del contenido incluido en la página 10
Operating Instructions Indoor Unit Controls and Indicators 1 2 3 4 5 6 7 8 12 13 14 9 10 11 15 16 1. Air Cleaner Operation Display 10. Outdoor Unit Operation Display 2. Energy Saving Operation Display 11. Off Timer Operation Display 3. Cooling Operation Display 12. Air Cleaner Operation Key 4. Auto Operation Display 13. Indoor Fan Speed Key Used to select fan speed in three steps-low, High, 5. Soft Dry Operation Display Super High. 6. Power on Display 14. Room Temperature Setting Key 7. Room Tem
Resumen del contenido incluido en la página 11
ENGLISH Operating Instructions Features of the Remote Control- Door Closed START/STOP BUTTON 1 Operation starts when this button is pressed and stops when the button is pressed again. ROOM TEMPERATURE 2 SETTING BUTTONS Used to select the room temperature. 4 5 INDOOR FAN SPEED 3 SELECTOR 3 1 Used to select fan speed in three steps low, high, super high. 2 TURBO-Z 4 Used to start or stop the speed Flip-up door cooling. (Speed cooling operates (closed) super high fan speed in cooling mode.) AUTO
Resumen del contenido incluido en la página 12
Operating Instructions Features of the Remote Control- Door Opened ON/OFF TIMER BUTTONS 1 Used to set the time of starting and stopping operation. TIME SETTING BUTTONS 2 Used to adjust the time. TIMER SET/CANCEL BUTTONS 3 Used to set the timer when the desired time is obtained and to cancel the Timer operation. SIMPLE OFF TIMER SET ON OFF 4 BUTTON 1 4 Each time the button is pressed, the mode is changed in the following process. 2 5 SET CANCEL Time set (0, 1, 2, 3, 4, 5, 6, 7 hrs) 3 6 If you sel
Resumen del contenido incluido en la página 13
ENGLISH Operating Instructions Remote Control Preparation 1. How to mount onto a wall Use the screws to secure the holder to the wall or attach the holder side of indoor unit. • Please keep it on the right side of indoor unit. When opening When closing 2. To insert the remote control to the holder. Insert Pull How to insert batteries • Do not use rechargeable batteries 1. Remove the cover from the back of the such batteries as different from remote controller. standard dry cells in shape, • Sl
Resumen del contenido incluido en la página 14
Operating Instructions Cooling Operation Mode Press the on/off button.(or touch anyplace of touch panel and touch the on/off key) 1 Select Cooling Operation. Press the mode Operation Button on the remote controller (or Touch the mode Operation key 2 on the touch panel) ON OFF SET CANCEL Set the temperature lower than the room temperature. The temperature can be set within a range of 60°F~86°F by 1°F. 3 To raise the temperature To lower the temperature When you finish the temperature setting. 4
Resumen del contenido incluido en la página 15
ENGLISH Operating Instructions Soft Dry Operation Press the on/off button.(or touch the anyplace of touch panel and touch the on/off key) 1 Select Soft Dry Operation Press the mode Operation Button on the remote controller 2 (or Touch the mode Operation key on the touch panel) ON OFF SET CANCEL Set the temperature lower than the room temperature. The temperature can be set within a range of 60°F~86°F by 1°F. 3 To raise the temperature To lower the temperature When you finish the temperature set
Resumen del contenido incluido en la página 16
Operating Instructions TURBO-Z Operation Press the on/off button.(or touch the anyplace of touch panel and touch the on/off key) 1 Press the TURBO-Z button to operate the speed cooling mode and the unit will operate in 2 super high fan speed in cooling mode. To cancel the TURBO-Z mode, press the TURBO-Z button again or the Auto Swing Direction Control Button (Up & Down, Left & Right) or Operation Mode Button and the unit will operate in 3 High. Fan speed on cooling mode. ON OFF ON OFF SET CANCEL
Resumen del contenido incluido en la página 17
ENGLISH Operating Instructions Auto Operation Mode Press the on/off button.(or touch the anyplace of touch panel and touch the on/off key) 1 Select Auto operation mode Press the Mode Operation Button on the remote controller 2 (or Touch the Mode Operation key on the touch panel) ON OFF SET CANCEL Set the temperature upper or lower than the standard temperature. 3 The temperature can be set within a range of by 1 level. Hot Cold Cool Proper Warm (This indication will be shifted to the initial Au
Resumen del contenido incluido en la página 18
Operating Instructions Energy Saving Mode Press the on/off button.(or touch the anyplace of touch panel and touch the on/off key) 1 Select Energy Saving Operation Press the Energy Operation Button on the remote controller 2 (or Touch the Energy Saving Operation key on the touch panel) ON OFF SET CANCEL To cancel the Energy Saving mode. Press(Touch) the Energy Saving Button(Key) Again and the unit will operate on Cooling/Auto/Soft Dry mode. 3 ON OFF SET CANCEL Auto restart In case the power come
Resumen del contenido incluido en la página 19
ENGLISH Operating Instructions Airflow Direction Procedure Press the Auto Swing Button and then Press the on/off button louvers will swing Up and down. 1 (or touch the anyplace of touch panel and 2 Press the Airflow Direction touch the on/off key) Control Button again to set the Horizontal louver at the desired airflow direction. (Operation will start when the button is pressed, The horizontal louver swing up and down. and stop when the button is pressed again. Side Airflow Direction Control Adj
Resumen del contenido incluido en la página 20
Operating Instructions Plasma Air Purifying Operation Procedure Air Purifying Operation only 1 Press(Touch) the Plasma Air Purifying Operation. 1 ON OFF SET CANCEL (Operation will start when the button is pressed, and stop when the button is pressed again.) Select Fan speed. 2 The display shows low fan speed at the initial condition. Low High • You can operate the Plasma Air Purifying under the unit operation of cooling, soft dry or Auto operation mode. Air Purifying Operation with Cooling or an
