Resumen del contenido incluido en la página 1 
                    
                        REFRIGERATOR USER INSTRUCTIONS
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING, 
please visit our website at www.whirlpool.com for additional information. If you still need assistance, call us at 1-800-253-1301. 
In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777. 
You will need your model and serial number, located on the inside wall of the refrigerator compartment.
   
Table of Contents  /  Índice 
                    
                    Resumen del contenido incluido en la página 2 
                    
                        IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:  ■ Plug into a grounded 3 prong outlet. ■ Use nonflammable cleaner. ■ Do not remove ground prong. ■ Keep flammable materials and vapors, such as gasoline,  away from refrigerator.  ■ Do not use an adapter. ■ Use two or more people to move and install refrigerator. ■ Do not use an extension cord. ■ Disconnect power before installing ice maker (
                    
                    Resumen del contenido incluido en la página 3 
                    
                        Door Removal, Leveling and Alignment Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference. NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the  refrigerator and freezer doors. If door removal is necessary, see the instructions below.  IMPORTANT: Before you begin, turn the refrigerator control OFF. Unplug refrigerator or disconnect power. TOOLS NE
                    
                    Resumen del contenido incluido en la página 4 
                    
                        NOTE: This may require two people - one to lift the door and  Remove the Doors  another to feed the water tubing and wiring through the hinge.  Be sure the hole in the hinge is clear of obstructions, then  gently pull one water tube through the hinge. (Avoid kinking  the tube.) Next, gently pull the other water tube through the  WARNING hinge, again avoiding kinks. Finally, gently pull the wiring  bundle (including the grommet and wiring plugs) through the  hinge. IMPORTANT: Rest the door on its
                    
                    Resumen del contenido incluido en la página 5 
                    
                        5. Reconnect water tubing and wiring. Door Alignment IMPORTANT: Do not intertwine the water tubing and wiring  bundles when reconnecting them. A refrigerator that is not level from side-to-side may appear to  ■ Push the larger ⁵⁄₁₆" (7.94 mm) water tube into the blue  have doors that are not properly aligned. If the doors appear this  fitting until it stops, then push the smaller ¹⁄₄" (6.35 mm)  way, use the instructions in the previous section to check the  water tube into the green fitting unt
                    
                    Resumen del contenido incluido en la página 6 
                    
                        4. While holding the handle, insert the short end of the hex key  into the upper hole and slightly rotate the hex key until it is  engaged in the setscrew.  3. Repeat the previous steps to install the refrigerator door  handle. 4. Save all instructions. 5. Using a clockwise motion, tighten the setscrew until it begins  To Remove the Handles: to contact the shoulder screw.  1. Lift the handle directly upward, and pull it off of the door. 6. Repeat steps 4 and 5 to begin fastening the lower setscr
                    
                    Resumen del contenido incluido en la página 7 
                    
                        NOTES:  ■ This refrigerator is intended for use in a location where the  Water Supply Requirements temperature ranges from a minimum of 55°F (13°C) to a  Gather the required tools and parts before starting installation.  maximum of 110°F (43°C). The preferred room temperature  Read and follow the instructions provided with any tools listed  range for optimum performance, which reduces electricity  here. usage and provides superior cooling, is between 60°F (15°C)  TOOLS NEEDED:   and 90°F (32°C).
                    
                    Resumen del contenido incluido en la página 8 
                    
                        Connect Water Supply Read all directions before you begin. 5. Place the free end of the tubing into a container or sink, and  turn on main water supply to flush out tubing until water is  IMPORTANT: clear. Turn off shutoff valve on the water pipe. ■ Plumbing shall be installed in accordance with the  NOTE: Always drain the water line before making the final  International Plumbing Code and any local codes and  connection to the inlet of the water valve, to avoid possible  ordinances. water valve
                    
                    Resumen del contenido incluido en la página 9 
                    
                        7. On some models, the ice maker is equipped with a built-in  water strainer. If your water conditions require a second water  Install Air Filter strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube  connection. Obtain a water strainer from your nearest (on some models) appliance dealer. On some models, your refrigerator's accessory packet includes  an air filter, which must be installed prior to use. On some models,  Style 3 the air filter is already installed at the factory.  1
                    
                    Resumen del contenido incluido en la página 10 
                    
                        4. On models with notches: 1. Remove the Produce Preserver pouches from their packaging. ■ Slide the indicator down into the notches, facing outward. NOTE: The indicator will not easily slide into the notches  if the rear bubble has not been popped. ■ Close the air filter door, and check that the indicator is  visible through the rectangular hole in the door. On models without notches: ■ Store the indicator in a visible place you will easily  CAUTION ATTENTION remember - either inside the refrig
                    
                    Resumen del contenido incluido en la página 11 
                    
                        REFRIGERATOR USE Using the Controls The refrigerator and freezer controls are located on the dispenser  panel. IMPORTANT: The display screen on the dispenser control panel  will turn off automatically and enter “sleep” mode when the  control buttons and dispenser pads have not been used for  2 minutes or more. While in “sleep” mode, the first press of a  control button will only reactivate the display screen, without  changing any settings. After reactivation, changes to any settings  can then b
                    
                    Resumen del contenido incluido en la página 12 
                    
                        Additional Features Convertible Drawer Temperature Control (on some models) Fast Ice The Fast Ice feature assists with temporary periods of heavy ice The control can be adjusted to properly chill meats or vegetables.  use by increasing ice production over a 24-hour period. The air inside the pan is cooled to avoid “spot” freezing and can  be set to keep meats at the National Livestock and Meat Board  IMPORTANT: This feature only works if the ice maker is turned  recommended storage temperatures 
                    
                    Resumen del contenido incluido en la página 13 
                    
                        NOTES: To Dispense Ice: 1. Make sure the desired type of ice is selected. To switch  ■ The dispensing system will not operate when the freezer door  is open. between cubed and crushed, press ICE TYPE.   ■ Allow 24 hours for the refrigerator to cool down and chill  water. WARNING ■ Allow 24 hours to produce the first batch of ice. Discard the  first three batches of ice produced. Wait 72 hours for full ice  production. ■ The display screen on the dispenser control panel will turn off  automatical
                    
                    Resumen del contenido incluido en la página 14 
                    
                        Ice Maker and Storage Bin (on some models) ■ Allow 24 hours to produce the first batch of ice. Discard the NOTE: It is not necessary to turn the ice maker control to the  first three batches of ice produced. OFF (right) position when removing the storage bin. The  sensor cover (“flipper door”), located on the right wall of the  ■ The quality of your ice will be only as good as the quality of the  freezer door, stops the ice maker from producing ice if the  water supplied to your ice maker. Avoid
                    
                    Resumen del contenido incluido en la página 15 
                    
                        Changing the Water Filter   Water Filtration System Do not use with water that is microbiologically unsafe or  of unknown quality without adequate disinfection before  or after the system. Systems certified for cyst reduction  may be used on disinfected waters that may contain  filterable cysts. Water Filter Status Light 1. Locate the water filter in the top-right corner of the refrigerator  The water filter status light will help you know when to change  compartment. your water filter.  2. Lift
                    
                    Resumen del contenido incluido en la página 16 
                    
                        TROUBLESHOOTING First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call. In the U.S.A., www.whirlpool.com     In Canada, www.whirlpool.ca Refrigerator Operation The refrigerator will not operate The refrigerator is noisy Refrigerator noise has been reduced over the years. Due to this  reduction, you may hear intermittent noises from your new  WARNING refrigerator that you did not notice from your old
                    
                    Resumen del contenido incluido en la página 17 
                    
                        The lights do not work The ice cubes are hollow or small ■ Is a light bulb loose in the socket or burned out? See  NOTE: This is an indication of low water pressure. “Changing the Light Bulbs.” ■ Water shutoff valve not fully open? Turn the water shutoff  valve fully open. ■ Is the dispenser light set to OFF? On some models, the  dispenser light will operate only when a dispenser lever/pad is  ■ Kink in the water source line? A kink in the line can reduce  pressed. If you want the dispenser ligh
                    
                    Resumen del contenido incluido en la página 18 
                    
                        ■ Has the dispenser arm been held in too long? Ice will stop  dispensing when the arm is held in too long. Wait 3 minutes  for dispenser motor to reset before using again. ACCESSORIES To order replacement filters, call 1-800-442-9991 and ask for the   The water dispenser will not operate properly part number listed below or contact your authorized Whirlpool  dealer. In Canada, call 1-800-807-6777. ■ Freezer door closed completely? Close the door firmly. If it  Stainless Steel Cleaner and Polish:
                    
                    Resumen del contenido incluido en la página 19 
                    
                        PERFORMANCE DATA SHEET Water Filtration System Model P5WB2L/P4RFWB Capacity 200 Gallons (757 Liters)  System tested and certified by NSF International against NSF/ANSI  Standard 42 for the reduction of Chlorine Taste and Odor, and Particulate  Class I*; and against NSF/ANSI Standard 53 for the reduction of Live  Cysts, Asbestos, Lead, Lindane, Toxaphene, Atrazine, and 2,4 - D.  This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below.
                    
                    Resumen del contenido incluido en la página 20 
                    
                        WHIRLPOOL CORPORATION MAJOR APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or  furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Parts  and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be  provided by a Whirlpool designa